Commit 204375e3 authored by David Bruce's avatar David Bruce

adding tuxtype-new


git-svn-id: svn://svn.debian.org/svn/tux4kids/tuxtype/branches/tuxtype-new@446 47d30e19-490b-0410-9d18-e851f4e465b3
parent 719a220c
# Modified to include support for NSIS Windows installer - David Bruce <dbruce@tampabay.rr.com>
MAKENSIS=@NSIS@
SUBDIRS = data doc src
EXTRA_DIST = AUTHORS COPYING ChangeLog INSTALL README TODO tuxtype.lsm tuxtype.spec tuxtype.spec.in config.h autorun.inf tuxtype.ico
install-data-local:
$(MKDIR_P) $(DESTDIR)$(prefix)/doc/$(PACKAGE)
$(INSTALL_DATA) $(srcdir)/ChangeLog $(DESTDIR)$(prefix)/doc/$(PACKAGE)/ChangeLog
$(INSTALL_DATA) $(srcdir)/tuxtype.lsm $(DESTDIR)$(prefix)/doc/$(PACKAGE)/tuxtype.lsm
$(MKDIR_P) $(DESTDIR)$(prefix)/share/$(PACKAGE)
$(INSTALL_DATA) $(srcdir)/tuxtype.ico $(DESTDIR)$(prefix)/share/$(PACKAGE)/tuxtype.ico
$(INSTALL_DATA) $(srcdir)/autorun.inf $(DESTDIR)$(prefix)/share/$(PACKAGE)/autorun.inf
uninstall-local:
-rm -f $(DESTDIR)$(prefix)/doc/$(PACKAGE)/ChangeLog
-rm -f $(DESTDIR)$(prefix)/doc/$(PACKAGE)/tuxtype.lsm
-rm -rf $(DESTDIR)$(prefix)/doc/$(PACKAGE)
-rm -f $(DESTDIR)$(prefix)/share/$(PACKAGE)/autorun.inf
-rm -f $(DESTDIR)$(prefix)/share/$(PACKAGE)/tuxtype.ico
-rm -rf $(DESTDIR)$(prefix)/share/$(PACKAGE)
# Now doing this in preferred way via AM_INIT_AUTOMAKE in configure.ac:
#AUTOMAKE_OPTIONS = foreign
# Rule to build tar-gzipped distribution package
$(PACKAGE)-$(VERSION).tar.gz: distcheck
# Rule to build RPM distribution package
rpm: $(PACKAGE)-$(VERSION).tar.gz
rpmbuild -ta $(PACKAGE)-$(VERSION).tar.gz
# Rules needed to cross-build nsis Win32 installer under Linux
# Taken from tuxmath's Makefile.am - David Bruce
# This rule probably kludgy (hardcoded)- DSB
install-nsi-local: all
$(INSTALL) -d $(top_srcdir)/$(NSI_INSTALL_DIR)/data;
$(INSTALL) -d $(top_srcdir)/$(NSI_INSTALL_DIR)/docs;
(cd $(top_srcdir)/tuxtype/data ; tar cf - --exclude "Makefile.in" --exclude "*.in" --exclude "*~" --exclude \ "Makefile" --exclude "Makefile.am" --exclude CVS --exclude .xvpics --exclude "1[1-9].ogg" --exclude "2?.ogg" --exclude "*.svn*" * ) \
| ( cd $(top_srcdir)/$(NSI_INSTALL_DIR)/data ; tar xf -) ; \
(cd $(top_srcdir)/tuxtype/docs ; tar cf - --exclude "Makefile.in" --exclude "*.in" --exclude "*~" --exclude \ "Makefile" --exclude "Makefile.am" --exclude CVS --exclude .xvpics --exclude "1[1-9].ogg" --exclude "2?.ogg" --exclude "*.svn*" * ) \
| ( cd $(top_srcdir)/$(NSI_INSTALL_DIR)/docs ; tar xf -) ; \
cp $(top_srcdir)/COPYING $(top_srcdir)/$(NSI_INSTALL_DIR)/docs/COPYING.txt ; \
cp $(top_srcdir)/AUTHORS $(top_srcdir)/$(NSI_INSTALL_DIR)/docs/AUTHORS.txt ; \
cp $(top_srcdir)/INSTALL $(top_srcdir)/$(NSI_INSTALL_DIR)/docs/INSTALL.txt ; \
cp $(top_srcdir)/README $(top_srcdir)/$(NSI_INSTALL_DIR)/docs/README.txt ; \
cp $(NSI_DLL_DIR)/*.dll $(top_srcdir)/$(NSI_INSTALL_DIR) ; \
cp $(SUBDIRS)/tuxtype.exe $(top_srcdir)/$(NSI_INSTALL_DIR)/TuxType.exe ;
# cp $(NSI_DLL_DIR)/*.ttf $(top_srcdir)/$(NSI_INSTALL_DIR)/data/fonts ;
## Bundle in fonts for distribution tar.gz to be used without package manager:
## i.e. to make tarball to post for individual download - use 'make distcheck' for Debian.
## (thanks to Ralf Wildenhues <Ralf.Wildenhues@gmx.de> for automake help!)
dist_with_fonts:
$(MAKE) $(AM_MAKEFLAGS) distdir=$(PACKAGE)_w_fonts-$(VERSION) dist_fonts='AndikaDesRevG.ttf DoulosSILR.ttf Rachana_w01.ttf' dist
install-nsi-am: install-nsi-local
nsis: install-nsi-local
$(MAKENSIS) -NOCD nsis/tuxtype.nsi
clean-local:
@$(NORMAL_CLEAN)
if test -d $(NSI_INSTALL_DIR); then \
rm -fr $(NSI_INSTALL_DIR); \
fi
\ No newline at end of file
# Process this file with autoconf to produce a configure script.
AC_INIT([Tux Typing],[1.5.16],[tux4kids-tuxtype-dev@lists.alioth.debian.org],[tuxtype])
AC_CANONICAL_BUILD
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
AC_CONFIG_SRCDIR([src/funcs.h])
# Tell Automake not to be as strict about packaging standards for tuxtype
# as it would be for an official Gnu program:
AM_INIT_AUTOMAKE(foreign)
AC_CONFIG_HEADERS([config.h])
# Checks for programs.
AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_LN_S
AC_PROG_MAKE_SET
dnl Don't think we need C++:
# AC_PROG_CPP
# AC_PROG_CXX
AC_PREFIX_DEFAULT(/usr/local)
if test "x$prefix" = "xNONE"; then
prefix=$ac_default_prefix
ac_configure_args="$ac_configure_args --prefix $prefix"
fi
# Checks for libraries.
# Check for SDL
SDL_VERSION=1.2.5
AM_PATH_SDL($SDL_VERSION,
:,
AC_MSG_ERROR([*** SDL version $SDL_VERSION not found!]))
AC_CHECK_LIB([SDL_mixer], [Mix_PlayMusic], ,[AC_MSG_ERROR(SDL_mixer not found http://www.libsdl.org/projects/SDL_mixer, )])
AC_CHECK_LIB([SDL_ttf], [TTF_Init], ,[AC_MSG_ERROR(SDL_ttf not found http://www.libsdl.org/projects/SDL_ttf, )])
AC_CHECK_LIB([SDL_image], [IMG_Load], ,[AC_MSG_ERROR(SDL_image not found http://www.libsdl.org/projects/SDL_image, )])
# FIXME would be better to skip check for win32 build
AC_CHECK_LIB([SDL_Pango], [SDLPango_Init], ,[AC_MSG_WARN(SDL_Pango not found http://sdlpango.sourceforge.net/)])
#
SDL_CFLAGS=`sdl-config --cflags`
CFLAGS="$CFLAGS $SDL_CFLAGS"
SDL_LIBS=`sdl-config --libs`
LIBS="$SDL_LIBS $LIBS"
# Check platform - see if see if building for Windows:
AC_MSG_CHECKING([for native Win32])
case "$host" in
*-*-mingw*)
native_win32=yes
;;
*)
native_win32=no
;;
esac
AC_MSG_RESULT([$native_win32])
AM_CONDITIONAL(BUILD_MINGW32, test "$native_win32" = yes)
if test "$native_win32" = yes; then
AC_DEFINE([BUILD_MINGW32], 1,[Native MinGW32 build])
CFLAGS="$CFLAGS -D__GW32__"
LIBS="-lmingw32 -lSDLmain $LIBS -luuid -lole32 -lwsock32 -mwindows"
CPPFLAGS="$CPPFLAGS -idirafter $prefix/include/glibc"
#CPPFLAGS="$CPPFLAGS -I$prefix/include/glibc"
AC_PATH_PROG(WINDRES, "$target_alias-windres", no, [$PATH])
fi
# Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS([stdlib.h string.h])
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
AC_C_INLINE
# Checks for library functions.
AC_CHECK_FUNCS([atexit memset strchr strstr malloc])
# Sam's Install Kludge-work
CPPFLAGS="$CPPFLAGS -DDATA_PREFIX=\\\"\$(prefix)\\\""
AC_CONFIG_FILES([Makefile
data/Makefile
data/fonts/Makefile
data/images/Makefile
data/images/backgrounds/Makefile
data/images/cities/Makefile
data/images/comets/Makefile
data/images/hands/Makefile
data/images/icons/Makefile
data/images/keyboard/Makefile
data/images/menu/Makefile
data/images/status/Makefile
data/images/tux/Makefile
data/scripts/Makefile
data/sounds/Makefile
data/themes/Makefile
data/themes/armenian/Makefile
data/themes/armenian/images/Makefile
data/themes/bokmal/Makefile
data/themes/bokmal/words/Makefile
data/themes/bokmal/images/Makefile
data/themes/bokmal/images/status/Makefile
data/themes/brazilian-portuguese/Makefile
data/themes/brazilian-portuguese/images/Makefile
data/themes/brazilian-portuguese/words/Makefile
data/themes/catalan/Makefile
data/themes/catalan/words/Makefile
data/themes/czech/Makefile
data/themes/czech/words/Makefile
data/themes/dansk/Makefile
data/themes/dansk/sounds/Makefile
data/themes/dansk/words/Makefile
data/themes/deutsch/Makefile
data/themes/deutsch/words/Makefile
data/themes/espanol/Makefile
data/themes/espanol/images/Makefile
data/themes/espanol/words/Makefile
data/themes/euskara/Makefile
data/themes/euskara/images/Makefile
data/themes/euskara/words/Makefile
data/themes/french/Makefile
data/themes/french/words/Makefile
data/themes/greek/Makefile
data/themes/greek/words/Makefile
data/themes/italian/Makefile
data/themes/italian/images/Makefile
data/themes/italian/words/Makefile
data/themes/jamaican/Makefile
data/themes/jamaican/images/Makefile
data/themes/jamaican/words/Makefile
data/themes/lithuanian/Makefile
data/themes/lithuanian/images/Makefile
data/themes/lithuanian/images/status/Makefile
data/themes/lithuanian/sounds/Makefile
data/themes/lithuanian/words/Makefile
data/themes/malayalam/Makefile
data/themes/malayalam/images/Makefile
data/themes/malayalam/images/status/Makefile
data/themes/malayalam/images/keyboard/Makefile
data/themes/malayalam/scripts/Makefile
data/themes/malayalam/words/Makefile
data/themes/nederlands/Makefile
data/themes/nederlands/words/Makefile
data/themes/nynorsk/Makefile
data/themes/nynorsk/images/Makefile
data/themes/nynorsk/images/status/Makefile
data/themes/nynorsk/words/Makefile
data/themes/russian/Makefile
data/themes/russian/images/Makefile
data/themes/russian/images/status/Makefile
data/themes/russian/words/Makefile
data/themes/svenska/Makefile
data/themes/svenska/words/Makefile
data/themes/swahili/Makefile
data/themes/swahili/words/Makefile
data/themes/wolof/Makefile
data/themes/wolof/images/Makefile
data/themes/wolof/words/Makefile
data/words/Makefile
doc/Makefile
doc/en/Makefile
src/Makefile
nsis/tuxtype.nsi
tuxtype.spec])
# Support for building NSIS Win32 installer (adapted from TuxMath NSIS):
NSI_INSTALL_DIR=mingw32
AC_SUBST(NSI_INSTALL_DIR)
NSI_DLL_DIR=~/tuxtype_dll
AC_ARG_WITH(dll-directory,AS_HELP_STRING([--with-dll-directory=path],[set the path where dll for TuxType are [$(NSI_DLL_DIR)]]), dll_path=$withval, dll_path=no)
AM_CONDITIONAL(NSI_BUILD, test "$dll_path" = no)
if test $dll_path != no; then
NSI_DLL_DIR=$dll_path
fi
AC_SUBST(NSI_DLL_DIR)
AC_PATH_PROG(NSIS, makensis, no, [$PATH])
AC_OUTPUT
This diff is collapsed.
Coders:
-------
David Bruce <dbruce@tampabay.rr.com>
Jesse Andrews <jdandr2@uky.edu>
Calvin Arndt <calarndt@tux4kids.org>
Sam Hart <hart@geekcomix.com> --- Sam started it all with TuxType 1!!!
Jacob Greig <bombastic@firstlinux.net>
Sreyas Kurumanghat <k.sreyas@gmail.com>
Sreerenj Balachandran <bsreerenj@gmail.com>
Vimal Ravi <vimal_ravi@rediff.com>
Prince K. Antony <prince.kantony@gmail.com>
Mobin Mohan <mobinmohan@gmail.com>
Packaging & Ports:
------------------
Holger Levsen <holger@debian.org> - (Debian packager, project maintainer)
David Bruce <dbruce@tampabay.rr.com> - (Windows crossbuild using Linux host)
David Marshman <marshy@silvan.demon.co.uk> - (BeOS port/packages)
Calvin Arndt <calarndt@yahoo.com> - (Red Hat 7.1+ RPMs)
Olivier Dagenais <olivier_dagenais@canada.com> - (Windows port/packages)
Jesse Andrews <jdandr2@uky.edu> - (Mac OS port)
Special thanks to:
------------------
Rich Bellamy <bellamrm@clarkson.edu> - (for several image patches)
Frank Ellis <frank3000@usa.net> - (for many submitted bug items and feedback)
Nicolai Beier <nbeier@tiscali.dk> - (for Danish work in TuxType 2)
Martin Moeller <martin@liga.dk> - (for Danish word files in TuxType 1)
Martin Rioux <riomar2000@hotmail.com> - (for French translation in TuxType 1)
Karl Ove Hufthammer <karl@huftis.org> - (for Norwegian Nynorsk translation work for Tuxtype 2)
Trond Mæhlum <trondm@skolelinux.no> - (for Norwegian Bokmål translation work for Tuxtype 2)
Sreyas Kurumanghat <k.sreyas@gmail.com> - (for Indic language support)
Sreerenj Balachandran <bsreerenj@gmail.com> - (for Indic language support)
Vimal Ravi <vimal_ravi@rediff.com> - (for Indic language support)
Prince K. Antony <prince.kantony@gmail.com> - (for Indic language support)
Mobin Mohan <mobinmohan@gmail.com> - (for Indic language support)
Ralf Wildenhues <Ralf.Wildenhues@gmx.de> - (for Autotools help via mailing lists)
Note: ConvertUTF.c/.h are from Unicode, Inc. and are released under a very free (BSD-like) license:
"Unicode, Inc. hereby grants the right to freely use the information
supplied in this file in the creation of products supporting the
Unicode Standard, and to make copies of this file in any form
for internal or external distribution as long as this notice
remains attached."
Note: The Andika,Doulos, and Charis fonts are from SIL International and are licensed under the Open Font
License, Version 1.1 (see "OFL.txt" in this directory for the full license text).
\ No newline at end of file
This diff is collapsed.
This diff is collapsed.
Quick Installation
==================
Tuxtype should compile out of the box if you have a sane tool chain
and the following SDL libraries:
SDL-1.2.5 http://www.libsdl.org
SDL_image-1.2.3 http://www.libsdl.org/projects/SDL_image
SDL_mixer-1.2.5 http://www.libsdl.org/projects/SDL_mixer
SDL_ttf-2.0.5 http://www.libsdl.org/projects/SDL_ttf
Notes:
freetype2 is required for SDL_ttf
SDL_2.0.6 is known not to compile on RH9
For most people using Linux
./configure --prefix=[your prefix here]
make
make install
if you run into problems rerun:
autoreconf --install
We want this to work for everybody, everywhere, if it doesn't
work for you please contact calarndt@tux4kids.org
While I've made every attempt to get build system right,
I am an autoconf/automake newbie. If you encounter issues
please feel free to contact me directly at:
Calvin Arndt <calarndt@tux4kids.net>
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
The file `configure.ac' is used to create `configure' by a program
called `autoconf'. You only need `configure.ac' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes a while. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
documentation.
4. You can remove the program binaries and object files from the
source code directory by typing `make clean'.
5. You can uninstall the program by typing `make uninstall' (trust me
this really does work ;)
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
Tux Typing for Windows
----------------------
Updated Aug 25 2007
2006-present Lead Developer:
David Bruce <dbruce@tampabay.rr.com>
Previous Project Manager:
Sam Hart <hart@geekcomix.com>
Developers:
Jacob Greig <bombastic@firstlinux.net>
Jesse Andrews <jdandr2@sheffield.cslab.uky.edu>
Original Windows Port by:
Olivier Dagenais <olivier_dagenais@canada.com>
Windows Crossbuild by
David Bruce <dbruce@tampabay.rr.com>
(based on TuxMath Windows crossbuild by Yves Combe)
To install the binary package for Tux Typing for Windows:
1. Run the nsis installer file (e.g. tuxtype-1.5.11-win32-installer.exe)
2. Click to accept the terms of the GPL
3. Click OK to install in default path (C:\Program Files\TuxType) or
select alternate location (perhaps if you are logged in as a user
without privileges to write to C:\Program Files).
4. The installer will create menu entries and a desktop icon for Tux
Typing if permissions allow.
Please read the COPYING.TXT file for the copyright for Tux Typing,
and read the SDL-COPYING.TXT file for the copyright information for
SDL. Basically, this software is open-source and free-software.
Enjoy!
## Makefile.am for tuxtype docs:
## Process with AutoMake:
dist_doc_DATA = AUTHORS \
COPYING \
ChangeLog \
INSTALL \
OFL \
README \
TODO
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
DIST_COMMON = README $(dist_doc_DATA) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in AUTHORS COPYING ChangeLog INSTALL TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(docdir)"
dist_docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_doc_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NSIS = @NSIS@
NSI_DLL_DIR = @NSI_DLL_DIR@
NSI_INSTALL_DIR = @NSI_INSTALL_DIR@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SDL_CFLAGS = @SDL_CFLAGS@
SDL_CONFIG = @SDL_CONFIG@
SDL_LIBS = @SDL_LIBS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
WINDRES = @WINDRES@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
dist_doc_DATA = AUTHORS \