Tags give the ability to mark specific points in history as being important
-
-
v1.2.15
28776e1e · ·Release v1.2.15 Configuration - USB-Audio: add support for conf.d configurations - USB-Audio: Steinberg UR22C - fix capture channels for older firmware - USB-Audio: GoXLR: enable detection of beta firmware (25 channels) - USB-Audio: Add jack controls for HP Thunderbolt Dock G2 - ucm2: sof-soundwire: Update cs42l45 JackControls - ucm2: IO-Boards: Toradex: aquila: add support - ucm2: Qualcomm: fix indentation for TUXEDO Elite 14 - ucm2: Qualcomm: fix HDMI0 name for TUXEDO Elite 14 - ucm2: Qualcomm: add TUXEDO Elite 14 support - rt713: add mic led support - USB-Audio: Add Audient iD14 MK2 support - sof-soundwire: second fix for -sdca variants for multi-codec - common: led.conf - don't use If.0 blocks - common: split.conf - don't use If.0 blocks - USB-Audio: Add support for DualSense PS5 controller - ucm2: Add setting LED Mode in SetLED macro - sof-soundwire: fix for -sdca variants for multi-codec - ucm2: rt712: simplify the init settings - ucm2: sof-soundwire: support rt713vb codec - ucm2: soundwire: cs42l45: Add support for CS42L45 codec - ucm2: Add support for MT8196 Rauru Rev0 Chromebook with SOF - USB-Audio: fix Steinberg UR22mkII device names - ucm2: codecs: rx-macro: add Headset Left enable/disable - ucm2: codecs: pm4125: add ucm for codec - ucm2: Qualcomm: x1e80100: T14s: add USB DisplayPort playback - Qualcomm: qcs615: Add TALOS EVK HiFi config - ucm2: Add support for Steinberg UR22mkII - ucm2: Qualcomm: Radxa: fix Displayport SectionDevice - ucm2: Qualcomm: Add MONACO-EVK HiFi config - ucm2: Qualcomm: sa8775p: Move lemans-evk hifi to sa8775p subdir - Qualcomm: Kaanapali: Add Kaanapali MTP HiFi config - The X1E80100-EVK needs basically the same configuration as - ucm2: MediaTek: mt8391-evk: Add alsa-ucm support - Add support for RME Fireface UCX (heavily based on RME Fireface UCX II config) - ucm2: Qualcomm: Add Microsoft Surface Pro 12in config - ucm2: Qualcomm: x1e80100: Add X1E001DE-DEVKIT configuration - ucm2: Qualcomm: add Radxa Dragon Q6A - ucm2: sof-soundwire: add rt721 ucm support - ucm2: Qualcomm: add Lenovo Ideapad 5 (Slim 5x / 2in1) support - ucm2: Qualcomm: Rename qcs6490-rb3gen2 and qcs9075-iq-evk ucm2 conf - ucm2: Qualcomm: Add Dell Latitude 7455 / Inspiron 14 Plus - ucm2: codecs: lpass-rx-macro: move mixers that do not belong - UR44: Add stereo inputs to the HiFi profile, relabel the inputs and outputs - Recognize one more Steinberg UR44 variant - ucm2: sof-soundwire: add rt712+rt1320 amplifier - ucm2: MediaTek: mt8395-evk: Add support for SOF - Behringer UCM204HD/404HD: Fix the macro evaluation for Syntax 7+ - UCM2: Intel: sof-hda-dsp: HiFi: IPC3 mono DMIC is exposed as stereo PCM - codecs/hda/hdmi.conf - add support for zero device - ucm2: MediaTek: mt8365-evk: Add SOF support - ucm2: USB-Audio: Add Teufel CAGE PRO - add MSI MAG B850M Mortar Wifi to USB-Audio.conf - ucm2: sof-soundwire: add rt712-vb device - UCM2: Intel: sof-hda-dsp: HiFi: Fix handling of mono DMICs - ucm2: Qualcomm: Update the HIFI enable mixer commands for qcm6490-idp and qcs6490-rb3gen2 - ucm2: Qualcomm: Update the QCM6490 and QCS6490 hifi conf files - Qualcomm: Add QCS9075-IQ-EVK HiFi config - Changed 'Stream Mix' channel names to match the latest Window - ucm2: Qualcomm: add ASUS Vivobook S 15 support - USB-Audio: Added Beacn Mic and Studio Support - USB-Audio: Solid State Labs SSL 2 - fix capture channels - ucm2: IO-Boards: Toradex: smarc: add support - ucm2: USB-Audio: Behringer: Flow8: fix conflicting - ucm2: tegra: max98090: fix headphones conflicting device - ucm2: Qualcomm: sm8650: QRD: fix headset jack hw mute - ucm2: Qualcomm: sc8280xp: fix internal microphones device - Fix Presonus Revelator IO44 HWChannels count - tegra: max98089: fix cset names - ucm2: Qualcomm: Add Surface Laptop 7 - ucm2: Qualcomm: x1e80100: Also match DMI board name - USB-Audio: Solid State Labs SSL 2+ - fix capture channels - USB-Audio: Remove useless sections for Solid State Labs SSL 2+ - acp3x-alc5682-max98357: Fix path of HiFi.conf Description - Release v1.2.15 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
-
v1.2.14
acaa985d · ·Release v1.2.14 Core - github: use ucm-validator2, use actions/checkout@v4 Configuration - USB-Audio: Add support of HyperX SoloCast (USB ID 03f0:0b8b) - ucm2: Qualcomm: add Asus Zenbook A14 - ucm2: Qualcomm: add Lenovo ThinkBook 16 support - ucm2: Qualcomm: add HP Omnibook X14 support - USB-Audio: Add focusrite scarlett 18i20 lineup - USB-Audio: Add Roland BridgeCast One - sof-soundwire: cs42l43: Switch mixer based on output volume - ucm2: sof-soundwire: Correct include file path for dsp.conf - USB-Audio: ALC4080 - add rear microphone support for 0414:a014 (Gigabyte Aorus Pro) - sof-soundwire: Add LED support for cs35l56 amplifiers - sof-soundwire: cs42l43: Drop headset mic from mic mute LED - HDA: mics - don't create conflict link for Headphone Mic - HDA: mics - improve the Jack selection - HDA: mics - prefer 'Mic Jack' instead 'Headphone Jack' - USB-Audio: ALC4080 - add support for ASUS B850-I (USB ID 0b05:1be1) - sof-hda-dsp: Use common HDA initialization from /HDA/init.conf - HDA: move led.conf include to more appropriate place - ucm2: Qualcomm: fix typo in Lenovo T14s matching - sof-soundwire: rt1318: add playback control switch - ucm2: Qualcomm: add Lenovo Yoga Slim7x support - ucm2: Qualcomm: add Lenovo T14s support - ucm2: MediaTek: mt8390-evk: Add support for SOF - Torradex: replace spaces with tabs when appropriate - Torradex: fix wrong device names Headphone/Microphone - USB-Audio: Add support for RME Fireface UCX II - Qualcomm: Add QCS6490 RB3Gen2 HiFi config - Qualcomm: Add QCM6490 IDP HiFi config - ucm2: IO-Boards: Toradex: verdin: Add support for Toradex - ucm2: IO-Boards: Toradex: verdin: Add support for Toradex - ucm2: NXP: iMX6: Toradex: colibri-imx6: Add support for - ucm2: NXP: iMX7: Toradex: colibri-imx7: Add support for - ucm2: NXP: iMX8X: Toradex: colibri-imx8x: Add support for - ucm2: NXP: iMX6: Toradex: apalis-imx6: Add support for - ucm2: NXP: iMX8: Toradex: apalis-imx8: Add support for - ucm2: IO-Boards: Toradex: apalis: Add support for Toradex - USB-Audio: add Roland Quad-Capture support - ucm2: HDA - remove HDA-Capture-value.conf and put contents directly to HDACaptureDevice macro - ucm2: HDA: HiFi-analog/mic: Refactor the analog mic discovery - GoXLR: Add 'Broadcast Stream Mix 2' to Capture if channels - use SetLED in rt1318 init configuration - Turn speaker LED accroding to rt1318 speaker status - ucm2: use new SetLED macro to hide the implementation details - common: add led.conf with SetLED macro to hide implementation details - USB-Audio: Add support for TASCAM Model 12 - UCM2: Blobs: SOF: Cleanup blob names from .blob to .bin - USB-Audio: alc4080: Add MSI PRO B650-A WIFI USB ID 0db0:9e6d - USB-Audio: Improve support for Focusrite 4th Gen devices - USB-Audio: GoXLR - fix the channel detection for mini, cleanups - USB-Audio: set capture channels to 4 in UR22C-HiFi.conf - sof-soundwire: Fix cs42l43 dmic initialisation - sof-soundwire: Split cs42l43 dmic initialisation - ucm2: add mt8183_mt6358_ts3a227_max98357 - ucm2: add mt8183_da7219_rt1015p - ucm2: add acp3x-alc5682-alc1015 - DEBUG.md: add "Logs from PipeWire (wireplumber)" section - USB-Audio: Revelator-IO-44-HiFi - fix device names (validator) - Rename ucm2/AMD/acp3xalc5682m98 to ucm2/AMD/acp3x-alc5682-max98357 - Rename ucm2/AMD/acpd7219m98357 to ucm2/AMD/acp-da7219-rt5682-max98357 - Qualcomm: Add SM8750 MTP HiFi config - rt722: change output volume of headphone to 0dB - ucm2: USB-Audio: add Presonus Revelator IO 44 (USB194f:0424) - USB-Audio: ALC4080 - add ASUS ROG Crosshair X870E Hero (USB ID 0b05:1b7c) - sun4i-codec: add routing for headphones and internal speaker - UCM2: sof-soundwire: Add setup of IIR, DRC, beamformer - UCM2: sof-soundwire: Add setup of IIR, DRC, beamformer - UCM2: sof-soundwire: Enable DRC and equalizers for - UCM2: Intel: sof-hda-dsp: Enable Dmic0 DRC and TDFB - UCM2: Blobs/SOF/IPC4: Add Beamformer blobs, update - UCM2: Intel: sof-hda-dsp: Cleanup definitions - UCM2: Intel: sof-hda-dsp: Move variables defitions from - ucm: fix SectionDevice identifiers - ucm2: whitespace fixes - USB-Audio: ALC4080: add support for MSI MEG X670E GODLIKE (USB 0db0:e1f8) - USB-Audio: ALC4080 - add ASUS ROG STRIX X870E-E GAMING WIFI (USB 0b05:1b9b) - Configuration files for Roland Bridge Cast X V2 - ucm2: sof-soundwire: Correct FixedBootSequence for dmic info - amd-soundwire: add support for AMD generic legacy machine driver - sof-hda-dsp: Add back missing .conf suffix for product/user specific configs - sof-soundwire: whitespace cleanup - sof-soundwire: cs42l43: Correct CapturePCM and routing - avs_nau8825: Fix JackControl name - sof-soundwire: cs42l43-spk: Correct PlaybackPCM and routing - sof-hda-dsp: Fix the case where sysfs dmi product_name attribute is not set - UCM2: Intel: sof-hda-dsp: Fix handling of empty sys_vendor Description - Release v1.2.14 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
-
v1.2.13
fcb7a6f2 · ·Release v1.2.13 Core - bug: Fix verbose logging in GitHub Workflow Configuration - USB-Audio: ALC4080 - change ID 26ce:0a08 to list multiple motherboards - USB-Audio: ALC4080: Add support for MSI MPG X870E CARBON (ID: 0db0:0b58) - USB-Audio: fix bracket location for If.motu-D828 - USB-Audio: add missing bracket for If.motu-D828 - USB-Audio: ALC4080 - add MSI X870 Tomahawk motherboard (ID 0db0:cd0e) - ucm2: MediaTek: mt8395-evk: Add headset jack detection - ucm2: MediaTek: mt8390-evk: Add headset jack detection - ucm2: MediaTek: mt8370-evk: Add headset jack detection - ucm2: MediaTek: mt8395-evk: Add dynamic configuration for - ucm2: MediaTek: mt8390-evk: Add dynamic configuration for - ucm2: MediaTek: mt8370-evk: Add dynamic configuration for - USB-Audio: ALC4080 - add ASRock X870E Taichi (ID 26ce:0a0b) - ucm2: Qualcomm: sm8650-qrd: fix codec initialisation - ucm2: Qualcomm: sm8650-mtp: fix codec initialisation - ucm2: Qualcomm: sm8550-hdk: fix codec initialisation - Revert "ucm2: Qualcomm: x1e80100: add USB DisplayPort - acppdmmach: add support for ACP 7.0 - sof-soundwire: Add sequence for controlling Mic Mute LED - sof-soundwire: Change map control names to make them unique and user friendly - rt722: add mic led support - ucm2: wsa884x: fix typo in mixer names - ucm2: USB-Audio: add Steinberg UR22C (USB0499:172f) - USB-Audio: Add Roland Bridge Cast V2 - ucm2: sof-soundwire: add RT1320 amplifier - ucm2: sof-soundwire: add rt712 VA device - USB-Audio: Add support for Focusrite 4th Gen devices - ucm2: Intel: avs_nau8825 - reuse configurations - ucm2: Intel: avs: Add UCM files for HDMI configuration - ucm2: Intel: avs: Add UCM files for ssm4567 configuration - ucm2: Intel: avs: Add UCM files for rt5663 configuration - ucm2: Intel: avs: Add UCM files for rt5514 configuration - ucm2: Intel: avs: Add UCM files for nau8825 configuration - ucm2: Intel: avs: Add UCM files for max98927 configuration - ucm2: Intel: avs: Add UCM files for max98373 configuration - ucm2: Intel: avs: Add UCM files for max98357a configuration - ucm2: Intel: avs: Add UCM files for da7219 configuration - ucm2: Intel: avs: Add UCM files for DMIC configuration - ucm2: sof-soundwire: Use the HdmiDevice macro for hdmi device creation - ucm2: Intel/sof-hda-dsp: Use the HdmiDevice macro for - ucm2: common: pcm: hdmi: Add new macro to conditionally - USB-Audio: Add support for Motu 828 - common: pcm/split: add support up to 32 / 8 channels - USB-Audio: Add support for MOTU Ultralite mk5 - Qualcomm: Add SM8550 HDK HiFi config - codes: wcd938x: Add Analog Microphones 1 & 5 Sequences - USB-Audio: Add 0582:01d8 BOSS Katana HEAD MkII support - USB-Audio: Add support for Solid State Labs SSL 2+ - ucm2/conf.d: add symlink for Qualcomm DB820c - ucm2: Qualcomm: x1e80100: add Headset capture - ucm2: codecs: wcd938x: correct 'cset' command - ucm2: Qualcomm: x1e80100: add USB DisplayPort playback - USB-Audio: ALC4080: Add 0db0:543d MSI TRX40 Pro 10G - sof-soundwire: Add support for cs42l43/cs35l56 bridge configuration - sof-soundwire: Add missing match for cs42l43 speakers - sof-hda-dsp: Fix the case where sysfs dmi sys_vendor attribute is not set Description - Release v1.2.13 - README: document the ALSA state file clearing Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
-
v1.2.12
ff32b301 · ·Release v1.2.12 Configuration - sof-soundwire: fix missing MultiCodec1 initialization and Empty condition - UCM2: Intel: sof-hda-dsp: Control SOF processing from UCM - UCM2: SOF: Add example blobs customization for AAEON - UCM2: Add sample SOF processing configuration blobs - codecs: qcom-lpass/tx-macro: Move TX1 MODE ctrl to - ucm2: codecs: wcd937x: add codec sequences - ucm2: soundwire: add rt722 SDCA device - ucm2: Qualcomm: x1e80100: add recording via DMIC01 - ucm2: sof-soundwire: Create ALSA config file for hdmi: - ucm2: Intel/sof-hda-dsp: Create ALSA config file for - ucm2: common: pcm: Add hdmi.conf to handle the creation - sof-soundwire: Add basic support for cs42l43's speaker - qcom: sdm845: MM1: enable jack detection - qcom: sdm845: MM1: use analog volume controls instead of - ucm2: Qualcomm: x1e80100: correct headphones - ucm2: Qualcomm: x1e80100: add number of channels - Add support for Coachz with HDMI disabled - USB-Audio: ALC4080: Add support for MSI MEG Z790 Ace - ucm2: MediaTek: mt8195-sof: Add support for Tomato RT5682s - sof-soundwire: rt1316/rt1318 - fix channel selection for one amp - sof-soundwire: rt1308: Fix single amp configuration - sof-soundwire: fix rt1318 config copy-n-paste error in rt1318spk macro - sof-soundwire: fix rt1318 config typo in rt1318spk macro - USB-Audio: ALC4080: add 0b05:1af1 ASUS ROG Strix Z790-A Gaming Wifi II Description - Release v1.2.12 Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
-
-
-
v1.2.10
5eb1d5f4 · ·Release v1.2.10 Configuration - mtk-rt5650: remove duplicate JackControl "Headset Jack" lines - USB-Audio: ALC4080 - 26ce:0a08 - Z790 PG-ITX/TB4 - USB-Audio: ALC4080 - 26ce:0a06 - ASRock X670E Taichi - tegra: Add UCM for MAX98089 based LG Optimus 4X HD and Vu - tegra: Add UCM for WM8903 based ASUS Transformers - tegra: Add UCM for RT5631 based ASUS Transformers - ucm2: Rockchip: Add UCM support for ES8316 on Rock 5B - USB-Audio: Added Universal Audio Volt 2 config - SplitPCM: Fix Device variable in SplitPCMDevice macro - USB-Audio: Do not use 4ch playback stream for stereo Focusrite Scarlet devices - ucm2: USB-Audio: Add support for more Focusrite Scarlet 2-input devices - USB-Audio: Arturia: set S32_LE format for SplitPCM - Intel/sof-essx8336: Fix HiFi.conf - USB-Audio: ALC4080: Add USB ID 0b05:1a5c (ASUS ROG Strix B650E-I) - Add Asus ROG STRIX X670E-F Gaming Wifi to USB-Audio.conf - ucm2: PinePhone: use "Mix Mono" routing for earpiece - Add support for Steinberg UR44C - ucm2: Qualcomm: sc8280xp: fix device numbers - acp62: add initial support for AMD ACP v6.2 RPL - acp63.conf: use symbolic link - acp63: add initial support for AMD Pink Sardine - ACP63 - sof-hda-dsp: move card-init include to top - sof-hda-dsp,sof-soundwire: add CaptureMicInfoFile fields for dmics - sof-essx8336: Dmic is not a valid UCM device identifier, use Mic Description - Release v1.2.10 Signed-off-by: Jaroslav Kysela <perex@perex.cz>