diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/.gitignore b/ExpEYES17/UserManual/fr/rst/qt5HTML/.gitignore deleted file mode 100644 index d625a2f24970f08b928934db1532d84f8ac7b0ae..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -_static/ -_images/ -*.html diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/1.1.html deleted file mode 100644 index 679ca85d640d238179264a0050fe82aef02327b8..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.1.html +++ /dev/null @@ -1,51 +0,0 @@ - -
- -
-

Introduction

-

La science est l’étude du monde physique par des observations systématiques -et des expériences. Une bonne éducation scientifique est essentielle -pour cultiver une société où le raisonnement et la pensée logique -prévalent au lieu de la superstition et des croyances irrationnelles. -L’éducation scientifique est aussi essentielle pour former suffisamment -de techniciens, d’ingénieurs et de scientifiques pour l’économie du -monde moderne. On admet largement que l’expérience personnelle issue -d’expérimentations et d’observations réalisées soit par les étudiants, -soit par des enseignants à titre de démonstration, soit essentielle -à la pédagogie de la science. Cependant, presque partout la science -est enseignée en grande partie à partir de livres de cours sans donner -d’importance à l’expérimentation, en partie à cause du manque d’équipements. -Sans surprise, la plupart des étudiants échouent à corréler leurs -connaissance acquise en classe aux problèmes rencontrés dans la vie -quotidienne. On peut jusqu’à un certain point corriger cela en enseignant -la science à l’aide de questionnements et d’expériences.

-

L’avènement des ordinateurs personnels et leur banalisation a ouvert -une nouvelle voie pour faire des expériences de laboratoire. L’ajout -d’un peu de matériel à un ordinateur ordinaire peut le convertir en -un laboratoire de sciences. Réaliser des mesures rapides avec une -bonne précision autorise l’étude une large palette de phénomènes. -Les expériences scientifiques impliquent en général la mesure et le -contrôle de certains paramètres physiques comme la température, la -pression, la vitesse, l’accélération, la force, la tension, le courant, -etc. Si la grandeur physique étudiée évolue rapidement, il faut automatiser -la mesure et un ordinateur devient utile. Par exemple, comprendre -la variation de la tension alternative du secteur nécessite de la -mesurer à chaque milliseconde.

-

La possibilité de réaliser des expériences avec une précision raisonnable -ouvre aussi la possibilité d’une éducation scientifique orientée sur -la recherche. Les étudiants peuvent comparer les données expérimentales -avec des modèles mathématiques et examiner les lois fondamentales -qui régissent de nombreux phénomènes. Le kit expEYES ( expEriments -for Young Engineers & Scientists) est conçu pour permettre une grande -variété d’expériences, de l’école à l’université. Il est aussi utilisable -comme un équipement de test pour des ingénieurs en électronique ou -des bricoleurs. L’architecture simple et ouverte d’expEYES permet -aux utilisateurs de développer de nouvelles expériences, sans rentrer -dans les détails de l’électronique et de la programmation d’ordinateurs. -Ce manuel utilisateur décrit expEYES-17 avec plusieurs expériences, -et il y a aussi un manuel du programmeur.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/1.2.html deleted file mode 100644 index 53de7bdc93f7440fb6abe12347ad252a0f2e45bf..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.2.html +++ /dev/null @@ -1,180 +0,0 @@ - -
- -
-

Le matériel

-

ExpEYES-17 est interfacé et alimenté grâce au port USB de l’ordinateur. -Pour y connecter des signaux externes, il a plusieurs entrées/sorties, -situées de chaque côté, comme montré sur la figure ExpEYES17. -Il peut surveiller et contrôler des tensions à ses connexions. Pour -mesurer d’autres paramètres (tels que la température, la pression, -etc.), on a besoin de les convertir en signaux électriques à l’aide -de capteurs adéquats.

-

La précision des mesures de tension est conditionnée par la stabilité -de la référence à 3,3~V utilisée, elle varie de 50~ppm par degré -Celsius. Les erreurs de gain et d’offset sont éliminées par une calibration -initiale, à l’aide du convertisseur analogique-numérique 16 bits.

-

Bien que notre premier objectif soit de faire des expériences, nous -vous conseillons de lire la brève description du matériel ci-dessous. -L’appareil peut être aussi utilisé comme matériel de test pour des -expériences d’électricité et d’électronique.

-

IMPORTANT:

-

Les tensions extérieures connectées à ExpEYES17 doivent être comprises dans les limites autorisées. Les entrées A1 et A2 doivent être dans l’intervalle -\pm16 -volts et les entrées IN1 and IN2 doivent être dans l’intervalle de 0 à 3,3V. Des tension excessives peuvent provoquer des dommages permanents. Pour mesurer des tensions plus hautes, diminuez-les en utilisant des diviseurs de tensions.

-
-_images/eyes17-panel.jpg -

ExpEYES17

-
-La face avant d’ExpEYES17 avec les connexions externes sur le dessus.
-
-
-

Connexions externes

-

Les fonctions des connexions externes sont expliquées brièvement ci-dessous. -Toutes les bornes de couleur noire sont des masses (0V), toutes -les autres tensions sont mesurées par rapport à elles.

-
-

Les sorties:

-
-

Source de courant constant (CCS):

-

La source de courant constant peut être activée ou désactivée (ON -et OFF) sous contrôle logiciel.La valeur nominale est 1,1mA mais -peut varier d’une unité à l’autre, à cause de la tolérance des composants. -Pour mesurer sa valeur exacte, connecter un ampèremètre entre CCS -et GND. Une autre méthode consiste à connecter une résistance connue -(environ 1~k\Omega) et mesurer la différence de potentiel -à ses bornes. La résistance de charge doit être inférieure à 3~k\Omega -pour cette source de courant.

-
-
-
-

Tension programmable (PV1) :

-

Elle peut être réglée, par logiciel, à toute valeur comprise dans -l’intervalle de -5V à +5V. La résolution est 12 bits, ce qui implique -une résolution en tension d’environ 2,5~mV.

-
-

Tension programmable (PV2) :

-

Elle peut être réglée, par logiciel, à toute valeur comprise dans -l’intervalle de -3,3V à +3,3V. La résolution est 12 bits.

-
-
-

Signal carré SQ1:

-

La sortie oscille entre 0 et 5V et la fréquence peut être ajustée -entre 10Hz et 100kHz. Toutes les valeurs intermédiaires de fréquence -ne sont pas possibles. On peut programmer le rapport cyclique. Quand -on règle la fréquence à 0Hz provoque un état HAUT à la sortie, et -si on la règle à -1Hz, la sortie passe à l’état BAS; dans les -deux cas la génération de signal carré est désactivée. La sortie SQR1 -comporte une résistance série de 100~\Omega -intégrée si bien qu’elle peut commander des DELs directement.

-
-
-

Signal carré SQ2:

-

La sortie oscille entre 0 et 5V et la fréquence peut être ajustée -entre 10Hz et 100kHz. Toutes les valeurs intermédiaires de fréquence -ne sont pas possibles. On peut programmer le rapport cyclique. La -sortie SQR2 n’est pas disponible quand on active WG.

-
-
-

Sortie numérique (OD1) :

-

La tension en OD1 peut être réglée à 0 ou 5V, par logiciel.

-
-
-

Signal Sinusoïdal/Triangulaire WG:

-

Sa fréquence peut être ajustée entre 5Hz et 5kHz. La valeur crête -peut être réglées à 3V, 1,0V ou 80mV. La forme du signal est -programmable. À l’aide de l’interface utilisateur on peut sélectionner -une forme sinusoïdale ou triangulaire. \overline{WG} est le signal -de WG, inversé..

-
-
-
-

Entrées:

-
-

Mesure de capacité en IN1:

-

On peut mesurer la valeur d’un condensateur connecté entre IN1 et -GND. Ça marche mieux pour de petites valeurs de capacité, jusqu’à -10nF, les résultats sont moins précis au-delà.

-
-
-

Fréquencemètre en IN2:

-

Celui-ci est capable de mesurer des fréquences jusqu’à plusieurs MHz.

-
-
-

Capteur de résistance (SEN):

-

Cette entrée est surtout conçue pour des capteurs comme des photorésistances -(LDR), des thermistances, des photo-transistors, etc. L’entrée SEN -est connectée en interne à 3,3V à travers une résistance de 5,1~k\Omega.

-
-
-

Entrées analogiques:math:pm16V, A1 & A2:

-

Celles-ci peuvent mesurer des tensions dans l’intervalle \pm16~V. -On peut choisir le calibre de 0,5V à 16V en pleine échelle. On -peut visualiser la tension de ces entrées en fonction du temps, ce -qui donne une fonction d’oscilloscope pour basses fréquences. La plus -grande vitesse d’échantillonnage est 1 Méch/s pour un seul canal. -Chacune des entrées a une impédance de 1~M\Omega .

-
-
-

Entrée analogique \pm3.3V A3:

-

Celle-ci peut mesurer une tension dans l’intervalle \pm3.3~V. On -peut amplifier cette entrée en connectant une résistance entre Rg -et GND, gain = 1+\frac{Rg}{10000}. Cela permet d’afficher des signaux -de très petite amplitude. L’impédance de l’entrée A3 est 10~M\Omega.

-
-
-

Entrée Microphone MIC:

-

Un microphone à condensateur peut être connecté à cette borne afin -de capturer le signal à la sortie.

-
-
-
-

Interface pour les capteurs I2C:

-

Les quatre connexions (+5V, GND, SCL et SDA) situées sur la bande -de connexions Berg supporte les capteurs de la famille I2C. Le logiciel -peut reconnaître un grand nombre de capteurs I2C disponibles dans -le commerce.

-
-
-

Alimentation \pm6~V/10~mA :

-

Les bornes VR+ et VR- sont des alimentations régulées. Elles fournissent -peut de courant, mais assez pour alimenter un ampli-op.

-
-
-
-

Kit d’accessoires

-

Quelques accessoires sont livrés avec expEYES.

-
-
    -
  • Fils électriques, avec une borne rigide mâle et avec une pince crocodile.
  • -
  • Microphone à condensateur avec ses fils.
  • -
  • Bobine d’induction (2): du fil isolé 44SWG enroulé dans une bobine -de diamètre 1cm. Environ 3000 tours (il peut y avoir quelques tours -de plus). On peut utiliser ces bobines pour étudier l’inductance, -l’induction électromagnétique, etc.
  • -
  • Disque piézo-électrique (2): sa fréquence de résonance est d’environ -3500Hz. Il peut être alimenté par la sortie WG ou SQR1. Le disque -est enfermé dans une coquille en plastique formant une cavité, qui -augmente l’amplitude du son produit.
  • -
  • Moteur CC: doit être alimenté par une tension continue de moins -de 3V.
  • -
  • Aimants permanents: (a) diamètre et longueur 10mm (b) diamètre -5mm et longueur 10mm (c) aimants de taille bouton(2)
  • -
  • DELs 5mm: rouge, bleue, verte, blanche.
  • -
  • Condensateurs: 100pF, 0.1µF , 1µF et 22µF
  • -
  • Inductances: 10mH / 20~\Omega,
  • -
  • Résistances: -560~\Omega, 1~k\Omega, 2,2~k\Omega , -10~k\Omega, -51~k\Omega et 100~k\Omega
  • -
  • photorésistance (LDR )
  • -
  • Deux diodes silicium (1N4148) et une diode Zéner de 3,3~V
  • -
  • Transistor NPN (2N2222)
  • -
-
-
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/1.3.html deleted file mode 100644 index 8185cb0ab1fc15bc85aa7d226094065c686c454e..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.3.html +++ /dev/null @@ -1,108 +0,0 @@ - -
- -
-

Installation du logiciel

-

ExpEYES peut fonctionner sur tout ordinateur disposant d’un interpréteur -Python et d’un module Python pour accéder au port série. L’interface -USB est prise en charge par le programme pilote qui présente le port -USB comme un port RS232 aux programmes d’applications. La communication -avec le boîtier expEYES est réalisée à l’aide d’une bibliothèque écrite -en langage Python.

-

Des programmes avec une interface utilisateur graphique ont été écrits -pour de nombreuses expériences. Le logiciel Eyes17 dépend des paquets -logiciels suivants:

-
-
    -
  • python3-serial
  • -
  • python3-numpy
  • -
  • python3-scipy
  • -
  • python3-qt5
  • -
  • python3-pyqtgraph
  • -
-
-
-

Pour toute distribution GNU/Linux:

-

Télécharger eyes17-x.x.x.zip (la dernière version) depuis -http://expeyes.in et dézipper ce fichier, puis aller dans -le nouveau dossier. Taper les commandes:

-
$ sudo sh postinst       # donne la permission d'accès à tous
-
-$ python main.py
-
-
-

Vous aurez des messages d’erreur pour tout paquet manquant qui pourrait -être nécessaire à expeyes. Installer ces paquets et réessayer. Les -programmes Python nécessaires pour de nombreuses expériences sont -dans le même répertoire, ils sont appelés par main.py.

-
-
-

Distributions GNU/Linux Debian ou Ubuntu

-

Télécharger eyes17-x.x.x.deb (la dernière version) depuis -la zone de téléchargement de http://expeyes.in et l’installer -à l’aide de la commande:

-
$ sudo gdebi eyes17-x.x.x.deb
-
-
-

alors qu’on est connecté à Internet

-

Le paquet eyes17 (de version supérieure à 3) ne dépend -pas de versions antérieures d’ExpEYES, comme expeyes-junior. Pendant -l’installation gdebi téléchargera automatiquement et installera -les paquets requis.

-

N.B.: on peut aussi utiliser la commande:

-
$ sudo apt install eyes17
-
-
-

alors qu’on est connecté à Internet; le paquet eyes17 disponible -dans la distribution (actuellement dans debian/buster ou ubuntu/bionic) -ainsi que toutes ses dépendances sera téléchargé et installé.

-
-
-

Le CD vif expEYES / La clé USB vive

-

L’image ISO qui offre le support pour eyes17 est disponible ICI pour -téléchargement. Créer un DVD ou une clé USB démarrables à l’aide cette -image ISO (télécharger rufus depuis https://rufus.akeo.ie pour faire -ça sous MSWindows)

-

Éteindre le PC et brancher la clé USB ou insérer le CD vif, puis démarrer -l’ordinateur. Entrer dans le BIOS durant la phase de démarrage, et -faire en sorte que le CD ou la clé USB soit prise en compte comme -premier média de démarrage. Redémarrer en enregistrant ce réglage. -Un bureau apparaîtra et on peut lancer expEYES-17 depuis le menu Applications->Éducation->ExpEYES-17.

-

On peut aussi le lancer depuis un terminal à l’aide de la commande:

-
$ python /usr/share/expeyes/eyes17/main.py
-
-
-
-
-

Sous MSWindows

-

Il faut tout d’abord installer le logiciel pilote pour le convertisseur -USB Série MCP2200, disponible sur le site de Microchip (et aussi disponible -sur le site expeyes). Après installation de ce pilote apparaîtra un -port COM, qu’on peut tester à l’aide du gestionnaire de périphériques -de MSWindows. Ensuite il y a deux options.

-

Un fichier zip contenant toutes les choses nécessaires pour ExpEYES -est disponible sur le site expeyes, sous le nom eyes17win.zip. -Télécharger et dézipper ce fichier puis lancer main.py -à partir de là. En utilisant cette méthode, on ne pourra pas écrire -soi-même de code Python pour accéder à expeyes; pour ce faire il -faut installer comme suit:

-
-
    -
  • Python version 2.x
  • -
  • python-serial
  • -
  • python-qt4
  • -
  • python-pyqtgraph
  • -
  • python-numpy
  • -
  • python-scipy
  • -
-
-

Télécharger le fichier eyes17-x.x.x.zip (la dernière version) -depuis le site web. En dézippant ce fichier on obtient un dossier -nommé **eyes17**, lancer **main.py** -depuis là.

-
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.4.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/1.4.html deleted file mode 100644 index effbe9017a9303862025daed209e4bd0823d9e07..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.4.html +++ /dev/null @@ -1,81 +0,0 @@ - -
- -
-

Le programme graphique principal

-

Démarrer Applications->Éducation->ExpEYES-17 depuis le menu. Un écran -d’oscilloscope à quatre canaux avec de nombreuses fonctionnalités -en plus, s’ouvrir comme affiché sur la figure Scope17. -On peut choisir de nombreuses expériences depuis le menu.

-
-_images/scope17.png -

Scope17

-
-L’écran scope17 affichant deux traces
-
-

La fenêtre principale apparaît comme un oscilloscope à basse fréquence -avec quatre canaux, et plusieurs fonctionnalités en plus, à droite -de l’écran. On peut sélectionner des applications pour plusieurs expériences -du menu de la barre supérieure. Une brève description du programme -d’oscilloscope est donnée ci-dessous.

-
-
    -
  • On peut activer chacune des quatre entrées (A1, A2, A3 ou MIC) en -utilisant sa case à cocher. On peut sélectionner les calibres en cliquant -sur le bouton à menu à droite de la case à cocher. Le calibre voulu -se choisit dans le menu surgissant.
  • -
  • Il y a une autre case à cocher pour activer l’ajustement mathématique -des données à l’aide d’un -modèle V = V_{0} \sin (2\pi ft + \theta) + C -pour afficher l’amplitude et la fréquence.
  • -
  • L’échelle horizontales (la base de temps) peut être réglées par un -curseur, depuis 0,5ms pleine échelle jusqu’à 500ms pleine échelle.
  • -
  • Le bouton à cocher Geler, permet de faire une pause ou de -revenir à la marche normale de l’oscilloscope.
  • -
  • Le niveau de synchronisation (trigger) peut être réglé grâce à un -curseur, et il y a un bouton à menu pour sélectionner la source de -synchronisation.
  • -
  • Pour enregistrer les traces dans un fichier, éditer le nom de fichier -voulu est cliquer le bouton Enregistrer sous.
  • -
  • Quand on clique sur FFT les spectres de fréquence des canaux -sélectionnés sont affichés dans des fenêtres surgissantes.
  • -
-
-

En plus de l’oscilloscope, il y a plusieurs options de contrôle/mesure -disponibles dans l’interface utilisateur, qui sont expliqués ci-dessous:

-
-
    -
  • Si on les sélectionne, les tensions présentes aux entrées A1, A2 et -A3 sont échantillonnées chaque seconde et affichées.
  • -
  • La résistance connectée entre SEN et GND est mesurée et affiché chaque -seconde.
  • -
  • Si on clique Capacité en IN1, on mesure la valeur du condensateur -connecté entre IN1 et GND.
  • -
  • Si on clique Fréquence en IN2, on mesure la fréquence d’une -source externe (au standard TTL) connectée à IN2
  • -
  • On peut choisir la forme du générateur de signal WG à l’aide d’un -bouton de menu, la forme par défaut étant sinusoïdale. On peut -changer en triangulaire. Quand l’option de signal carré est -choisie, la sortie est déplacée sur SQ2. On ne peut pas utiliser -un signal sinusoïdal/triangulaire et utiliser SQ2 en même temps.
  • -
  • On peut ajuster la fréquence du signal de WG à l’aide du curseur ou -bouton de menu, la forme par défaut étant sinusoïdale. On peut changer -avec l’entrée texte. Les deux méthodes de saisie sont asservies l’une -à l’autre: quand on bouge le curseur le texte est modifié, et quand -on saisit un texte le curseur s’ajuste. La fréquence s’ajuste à la -plus proche valeur possible et elle est affichée dans la fenêtre de -message dessous. L’amplitude de la sortie WG peut être réglée à 3V, -1V ou 80mV.
  • -
  • On peut régler SQ1 en utilisant la même méthode que ci-dessus. Le -rapport cyclique peut être réglé entre 1% et 99%, sa valeur par -défaut est 50%.
  • -
  • Les deux sorties de tension programmables PV1 et PV2 sont aussi réglées -d’une façon similaire.
  • -
  • Des boutons à cocher sont fournis pour contrôler OD1 et CCS.
  • -
-
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.5.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/1.5.html deleted file mode 100644 index b3cc4d6dc5ed2f515e18a2211f0243d876ad682a..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/1.5.html +++ /dev/null @@ -1,25 +0,0 @@ - -
- -
-

Se familiariser avec ExpEYES17

-

Avant de commencer les expériences, faisons quelques exercices simples -pour nous familiariser avec expEYES-17. Démarrez votre ordinateur -avec le CDROM vif, connectez l’appareil à un port USB et démarrez -le programme EYES-17 depuis le menu «Applications->Science». -Activez l’option «fenêtre d’aide surgissante» et sélectionnez -les quelques premier items du menu «Exp. scolaires».

-

Les chapitre suivants sont structurés selon les menus du programme -eyes17, chaque chapitre contenant les expériences disponibles sous -le menu correspondant, comme «Exp. scolaires», «Électronique», -«Électricité», etc. Pour réaliser l’expérience, on la sélectionne -dans le menu. Une aide en ligne est disponible pour chaque expérience, -de façon redondante avec ce manuel.

-

Les copies d’écran fournies dans ce document ne viennent pas de l’interface -utilisateur, parce que les images avec un fond noir posent problème -quand on les imprime. Les graphiques sont générés par un code indépendant.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.1.html deleted file mode 100644 index a72f3a435abfd11fcea89019b8cc166e57fbffd1..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.1.html +++ /dev/null @@ -1,30 +0,0 @@ - -
- -
-

Mesurer une tension

-

Objectif

-

Apprendre à mesurer une tension à l’aide d’expEYES et avoir une petite -idée du concept de masse électrique (GND). Il faut une pile et deux fils -électriques.

-_images/measure-dc.svg -

Procédure

- -

Discussion

-

La valeur des tensions mesurées est +1,5V et elle devient -1,5V après -retournement des connexions.

-

On mesure la différence de potentiel entre deux points. L’un d’entre eux -peut être considéré comme zéro volt, ou potentiel de la masse (GND, la -terre). La tension qu’affiche expEYES est une mesure de la tension -relative aux bornes de masse, marquées GND. On a connecté la borne -négative de la pile à GND. La borne positive est à +1,5V relativement à -la borne de masse. Est-ce que la tension correcte sera affichée si on -ne connecte pas GND?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.10.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.10.html deleted file mode 100644 index f345a4b0c4c9249e0ea0162e4066c755e2cad8cb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.10.html +++ /dev/null @@ -1,28 +0,0 @@ - -
- -
-

Photorésistances

-

Objectif

-

Étudier une photorésistance (LDR). Mesurer l’intensité de la lumière et -sa variation en fonction de la distance à la source.

-_images/ldr.svg -

Procédure

- -

Discussion

-

La résistance varie de 1~k\Omega à environ 100~k\Omega -selon l’intensité de la lumière qui l’éclaire. La tension est -proportionnelle à la résistance (si le courant est constant). La -résistance diminue quand l’éclairage augmente. Si on utilise une -source de lumière ponctuelle, la résistance est censée augmenter comme -le carré de la distance entre la photorésistance et la source lumière.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.11.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.11.html deleted file mode 100644 index 7bafc35a4f68dfa48111885be9ac1b0870ea62cb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.11.html +++ /dev/null @@ -1,31 +0,0 @@ - -
- -
-

Tension d’une pile-citron

-

Objectif

-

Créer une source de tension en insérant des plaques de zinc et cuivre -dans un citron. Explorer les possibilités de fournir du courant et la -résistance interne.

-_images/lemon-cell.svg -

Procédure

- -

Discussion

-

La tension entre le zinc et le cuivre est d’environ 0,9V. Quand on -connecte la résistance, elle diminue à quelques 0,33V. Quand on -connecte la pile, le courant commence à circuler à travers la -résistance. Mais pourquoi la tension diminue-t-elle?

-

Quelle est la résistance interne de la pile?

-

Le courant est le flux de charges et il doit faire le tour complet. Ce -la signifie que le courant doit traverser la pile aussi. Selon la -résistance interne de la pile, une part de la tension est perdue à -l’intérieur même de la pile. Est-ce que la même chose se produit avec -une pile du commerce neuve?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.12.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.12.html deleted file mode 100644 index 132273acdb4988d34e14c694424c6d236e0d9f37..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.12.html +++ /dev/null @@ -1,33 +0,0 @@ - -
- -
-

Un générateur alternatif simple

-

Objectif

-

Mesurer la fréquence et l’amplitude d’une tension induite aux bornes -d’un bobinage par un aimant en rotation. On utilise l’aimant de -10~mm\times 10~mm et la bobine de 3000tours qui sont dans le kit.

-_images/ac-generator.svg -_images/ac-gen-screen.png -

Procédure

- -

Discussion

-

La tension obtenue est affichée dans la figure. La différence de phase -entre les deux signaux dépend de l’angle entre les axes des deux -bobinages.

-

Approcher un bobinage court-circuité près de l’aimant et observer le -changement de fréquence. Le bobinage court-circuité prend de l’énergie -du générateur et la vitesse en est diminuée.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.13.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.13.html deleted file mode 100644 index 9e64da678292786fe85bb2a3807d55529ecd2bf0..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.13.html +++ /dev/null @@ -1,41 +0,0 @@ - -
- -
-

Transformateur de courant alternatif

-

Objectif

-

Démontrer l’induction mutuelle entre deux bobinages, fournis avec -ExpEYES. Un des bobinages, le primaire, est connecté entre WD et GND. On -aligne les axes des deux bobinages et on insère un noyau de -ferrite.

-_images/transformer.svg -_images/transformer-screen.png -

Procédure

- -

Discussion

-

Le signal appliqué et le signal induit sont présentés sur la figure. Un -champ magnétique oscillant est la cause de la tension induite. Dans les -deux expériences précédentes, le champ magnétique oscillant était créé -par le mouvement d’aimants permanents. Dans le cas présent, il est créé -par un courant variable dans le temps.

-

Essayer de faire cette expérience avec un signal carré. Connecter une -résistance de 1~k\Omega aux bornes du bobinage secondaire pour réduire -les oscillation de résonance.

-

Le concept de courant alternatif est introduit en affichant la tension -en fonction du temps. On explore le comportement de dipôles tels que les -condensateurs et les bobinages en courant continu et alternatif, en -mesurant des paramètres tels que l’amplitude, la fréquence et la phase. -La conversion de signaux électriques en son et l’inverse est démontré. -Pour chaque expérience, on réalise les connexions selon le diagramme -donné.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.14.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.14.html deleted file mode 100644 index 7d15eef970b0038b9535745f0354b36f77fa2696..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.14.html +++ /dev/null @@ -1,37 +0,0 @@ - -
- -
-

Résistance de l’eau, en courant alternatif

-

Objectif

-

Mesurer la résistance de solutions ioniques, en utilisant des signaux -continu et alternatif. On utilise de l’eau ordinaire du robinet. Essayer -de mesurer la résistance au préalable à l’aide d’un -multimètre.

-_images/res-water.svg -_images/water-conduct.png -

Procédure

- -

Discussion

-

Les valeurs observées sont montrées dans le tableau. Les résistances en -continu et en alternatif semblent très différentes. En courant continu, -la résistance du liquide change au cours du temps, à cause d’une -électrolyse et de la formation de bulles. La résistance dépend peu de la -distance entre électrodes, c’est la surface de l’électrode qui a le plus -d’effet. La résistance dépend de la concentration en ions et à la -présence d’impuretés dans l’eau.

-

Essayer de changer la distance entre électrodes. Essayer d’ajouter un -sel ordinaire et recommencer les mesures. Pourquoi le comportement -est-il différence en courant continu ou alternatif? Quels sont les -porteurs de charges responsables du flux d’électricité à travers les -solutions? Y a-t-il une réaction chimique qui se produit?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.15.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.15.html deleted file mode 100644 index d7351aaa5fe079735689fd5695f9504b60f436dc..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.15.html +++ /dev/null @@ -1,25 +0,0 @@ - -
- -
-

Générer un son

-

Objectif

-

Générer un son avec des signaux électriques, à l’aide d’un buzzer -piézo-électrique. Numériser un son et mesurer sa fréquence? Utiliser un -buzzer piézo ou toute autre source sonore comme un diapason.

-

Procédure

-_images/sound-generator.svg - -

Discussion

-

Quand on change la fréquence du signal qui excite le piézo, la fréquence -et l’intensité du son changent toutes les deux. L’intensité est maximale -près de 3500~Hz, à cause de la résonance. La fréquence de résonance -d’un buzzer piézo dépend de sa taille et de ses propriétés mécaniques.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.16.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.16.html deleted file mode 100644 index a41a208b5a961deb5ddebc8f22d374f72e94444d..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.16.html +++ /dev/null @@ -1,31 +0,0 @@ - -
- -
-

Numériser un son

-

Objectif

-

Numériser des signaux sonores d’un microphone, et mesurer leur -fréquence. Utiliser le buzzer piézo ou toute autre source sonore comme -un diapason.

-

Procédure

-_images/sound-capture.svg - -

Discussion

-

Le signal du générateur et la sortie du microphone sont montrés dans la -figure

-

Les ondes sonores créent des variations de pression dans le milieu -qu’elles traversent. Le microphone crée une tension proportionnelle aux -variations de pression. Les variations de tension sont à l’unisson des -variations de pression. On peut comparer le microphone à un capteur de -pression, mais qui fonctionne seulement pour les variations de pression.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.17.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.17.html deleted file mode 100644 index 870334aedd2f80752554b85ea38ee22e5c1a9cdb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.17.html +++ /dev/null @@ -1,28 +0,0 @@ - -
- -
-

Stroboscope

-

Objectif

-

Observation d’un phénomène périodique à l’aide de lumière pulsée périodiquement.

-

Procédure

-_images/stroboscope.svg - -

Discussion

-

Quand la fréquence du phénomène observé et la fréquence de la lumière pulsée -sont identiques, on peu observer une image statique.

-

Qu’arrive-t-il quand on augmente ou qu’on diminue un petit peu la fréquence de -la lumière?

-

Qu’arrive-t-il quand la fréquence de la lumière pulsée est le double de -celle du phénomène? et quand elle est la moitié?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2.html deleted file mode 100644 index ce15d9938cf25597be9b6074d8c67ecc6cea1b78..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2.html +++ /dev/null @@ -1,19 +0,0 @@ - -
- -
-

Mesurer une Résistance

-

Objectif

-

ExpEYES a une borne marquée SEN, qu’on peut utiliser pour mesurer -des résistances dans l’intervalle de 100~\Omega à 100~k\Omega.

-_images/res-measure.svg -

Procédure

- -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2a.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2a.html deleted file mode 100644 index 24977a1ac91c9025e215a1d9e402620451788e5c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2a.html +++ /dev/null @@ -1,20 +0,0 @@ - -
- -
-

Mesure de résistances en série

-

Objectif

-

La résistance équivalente à une série de résistances est -R = R_1 + R_2 + ⋯.

-_images/res-series.svg -

Procédure pour deux résistances

- -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2b.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2b.html deleted file mode 100644 index e74e46818b8d0017ee51173b453795598838d4fb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.2b.html +++ /dev/null @@ -1,20 +0,0 @@ - -
- -
-

Mesure de résistances en parallèle

-

Objectif

-

Pour des résistances en parallèle, la relation suivante permet de calculer -la résistance équivalente: -\frac{1}{R} = \frac{1}{R_1} + \frac{1}{R_2} + ⋯

-_images/res-parallel.svg -

Procédure pour deux résistances

- -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3.html deleted file mode 100644 index 123e1199ab78e26a1f062303606db2ad6690bf12..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3.html +++ /dev/null @@ -1,24 +0,0 @@ - -
- -
-

Mesurer une Capacité

-

Objectif

-

Mesurer la capacité d’un condensateur.

-_images/cap-measure.svg -

Procédure

- -

Discussion

-

On a utilisé des condensateurs de 100~pF pour cette activité.

-

On peut créer des condensateurs en collant de fines feuilles de métal -sur les deux faces d’un isolant comme le papier, le polystyrène ou le -verre.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3a.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3a.html deleted file mode 100644 index ca2eb2eca6d0c728c07262c4cca9ea7da4520bb9..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3a.html +++ /dev/null @@ -1,24 +0,0 @@ - -
- -
-

Mesure de la capacité de condensateurs en série

-

Objectif

-

Mesurer la capacité de condensateurs en série.

-_images/cap-series.svg -

Procédure pour deux condensateurs

- -

Discussion

-

Pour des condensateurs en série, on peut calculer la capacité équivalente -à l’aide de la formule: -\frac{1}{C} = \frac{1}{C_1} + \frac{1}{C_2} + ⋯.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3b.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3b.html deleted file mode 100644 index 05ccd98b28da43139aa72eefcdb77ee1a939da81..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.3b.html +++ /dev/null @@ -1,23 +0,0 @@ - -
- -
-

Mesure de la capacité de condensateurs en parallèle

-

Objectif

-

Mesurer la capacité de condensateurs en parallèle

-_images/cap-parallel.svg -

Procédure pour deux condensateurs

- -

Discussion

-

Pour des condensateurs en parallèle, on peut calculer la capacité équivalente -à l’aide de la formule: -C = C_1 + C_2 + ⋯.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.4.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.4.html deleted file mode 100644 index 33d10506e9f8480ce2e3cfdabdcc6a0ce45003aa..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.4.html +++ /dev/null @@ -1,37 +0,0 @@ - -
- -
-

Mesurer des résistances par comparaison

-

Objectif

-

Apprendre à appliquer la loi d’Ohm pour trouver le valeur d’une -résistance inconnue par comparaison avec une résistance connue. La -tension aux bornes d’une résistance est donnée par U = RI. Si la -même valeur de courant parcourt deux résistances différentes, alors le -rapport des tensions sera le même que le rapport des -résistances, I = U_{A1}/R_2 = (U_{PV1} − U_{A1})/R_1.

-_images/res-compare.svg -

Procédure

- -

Discussion

-

Quelle est la limitation de cette méthode? Comment choisir la -résistance de référence? Si on suppose que la valeur inconnue est en -M\Omega, quelle serait la chute de tension aux bornes d’une résistance de -référence de 1~k\Omega ? Notre mesure de tension a une résolution de -1/4096.

-

On utilisera cette méthode plus tard pour mesurer la résistance de -solutions, à l’aide de courant alternatif.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.5.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.5.html deleted file mode 100644 index b97994effcefbd2dbccba74ce1b12b98e1fc8201..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.5.html +++ /dev/null @@ -1,31 +0,0 @@ - -
- -
-

Courants continu et alternatif

-

Objectif

-

Introduire le concept de tensions variables dans le temps, à l’aide d’un -graphique U(t). Comparer les graphiques de continu et -d’alternatif.

-_images/ac-dc.svg -

Procédure

- -

Discussion

-

Dans le graphique, si la courbe de tension ne change pas (si elle est -horizontale), c’est du courant continu pur. Si la tension change avec le -temps, il y a une composante alternative. Si la tension moyenne est -nulle, alors c’est de l’alternatif pur. Dans le deuxième graphique, la -tension varie entre zéro et cinq volt; est-ce du courant alternatif, -continu, ou quelque chose d’autre?

-_images/ac-dc.png -_images/sqr-wave.png -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.6.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.6.html deleted file mode 100644 index 31b8d9cc23dee28279d3bcfd35ac87c64241ac7a..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.6.html +++ /dev/null @@ -1,28 +0,0 @@ - -
- -
-

Signal d’antenne alternatif dû au secteur

-

Objectif

-

Étudier l’alimentation du secteur en courant alternatif. Explorer le -phénomène de propagation de tensions alternatives à travers l’espace.

-_images/line-pickup.svg -

Procédure

- -

Discussion

-

Le signal d’antenne du secteur est affiché ci-dessous, il y a cinq -cycles en 100ms. Sans faire aucune connexion, comment se fait-il qu’on -reçoive un signal de tension alternative depuis le secteur? Pourquoi la -tension augmente-t-elle quand on touche le fil connecté en A1 avec la -main?

-_images/pickup.png -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.7.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.7.html deleted file mode 100644 index 0ac805042e96b9066112f9485536ed3731093314..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.7.html +++ /dev/null @@ -1,33 +0,0 @@ - -
- -
-

Séparation des composantes continue et alternative

-

Objectif

-

Séparer les composantes alternative et continue d’un signal à l’aide -d’un condensateur.

-

Procédure

-_images/acdc-separating.svg -_images/acdc-sep-screen.png - -

Discussion

-

Les signaux observés avec et sans le condensateur en série sont affichés -sur la figure. La tension oscille entre 0 et 5V. Après traversée d’un -condensateur, la tension oscille entre -2,5V et +2,5V.

-

Qu’obtient-on si on soustrait 2,5V de l’ordonnée de chaque point du -premier graphique? C’est ce que le condensateur a fait. Il n’a pas -autorisé la composante continue à passer. On peut considérer que le -signal original consiste en une tension alternative d’amplitude 2,5V -superposée à un signal continue de +2,5V.

-

Il faut éventuellement connecter une résistance entre A2 et GND pour -observer le signal oscillant entre -2,5V et +2,5V. Retirer la -résistance et observer le signal.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.8.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.8.html deleted file mode 100644 index 910384cf00892c69e2c6f0c708217cc44fd1dd25..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.8.html +++ /dev/null @@ -1,30 +0,0 @@ - -
- -
-

Le corps humain comme conducteur

-

Objectif

-

Toucher un fil du secteur est fatal parce que notre corps est un -conducteur électrique. On peut explorer cela à l’aide de signaux de -faible tension.

-_images/conducting-human.svg -_images/conducting-human-screen.png -

Procédure

- -

Discussion

-

La tension crête observée est de moins de 3V, à cause de la résistance -du corps humain. Il peut y avoir un peu de perturbation due au signaux à -50 Hz du secteur captés par effet d’antenne. On peut éliminer cela en -travaillant loin des lignes d’alimentation du secteur, à l’aide d’un -ordinateur portable.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.9.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/2.9.html deleted file mode 100644 index d446c2eb020e934dc926f12ec0231dc115dc1755..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/2.9.html +++ /dev/null @@ -1,30 +0,0 @@ - -
- -
-

Résistance électrique du corps humain

-

Objectif

-

Mesurer la résistance électrique du corps humain en la comparant à une -résistance connue. On commence avec un signal continu issu de PV1 puis -on continue avec un signal alternatif issu de WG.

-_images/res-body.svg -

Procédure

- -

Discussion

-

Les mesures en courant continu sont plus affectées par les bruits -électriques. La résistance en courant alternatif est censée être -inférieure à la résistance en courant continu. La résistance est due à -notre peau, le courant électrique peut y passer comme il passe à travers -un condensateur.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.0.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.0.html deleted file mode 100644 index abbbcd17342930a4000f1f0eb3be6061f6b7b7ab..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.0.html +++ /dev/null @@ -1,85 +0,0 @@ - -
- -
-

Oscilloscope à quatre canaux, et plus

-

Eyes17 est livré avec une application dont l’interface utilisateur par défaut -est un oscilloscope à quatre canaux amélioré.

- -
-_images/scope-outputs.png -
-
-

Branchements de sortie

-
    -
  • CCS: source courant constant de 1.1\ mA, on l’active et on la -désactive à l’aide du bouton à cocher CCS.
  • -
  • PV1: Tension programmable, dans l’intervalle \pm 5\ V. On peut -la régler à l’aide du curseur ou à l’aide d’une entrée texte.
  • -
  • PV2: comparable à PV1, mais pour l’intervalle - 3.3\ V à + 3.3\ V
  • -
  • SQ1: Générateur de signal carré, variant entre 0 et 5\ V. -La fréquence est réglable de 1\ Hz à 5\ kHz.
  • -
  • SQ2: comme SQ1, mais disponible comme une option de WG.
  • -
  • OD1: Sortie numérique, sa tension peut être 0 ou 5\ V.
  • -
  • WG: Générateur de basse fréquence. La fréquence est entre 1\ Hz -et 5\ kHz. On peut régler l’amplitude à 3\ V, 1\ V -ou 80\ mV. -Le signal peut être sinusoïdal, triangulaire ou carré. En mode signal -carré, la sortie est sur SQ2, avec une excursion de 0 à 5\ V.
  • -
  • -WG: Sortie de WG inversée.
  • -
-
-_images/scope-inputs.png -
-
-
-

Branchements d’entrée

-
    -
  • IN1: Entrée pour mesurer la capacité d’un condensateur. Un -bouton-poussoir permet de lancer la mesure.
  • -
  • IN2: Entrée pour mesurer la fréquence de signaux numériques, qui -varient entre 0 et 3 à 5\ V. -Un bouton-poussoir permet de lancer la mesure.
  • -
  • SEN: Entrée pour mesurer la résistance. Ce point est rappelé en interne -à 3.3\ V via une résistance de 5.1\ k\Omega.
  • -
  • A1: Entrée de mesure de tension, fonctionne comme voltmètre ou comme -oscilloscope. Le calibre maximal est \pm\ 16\ V, on choisit -le calibre depuis un menu déroulant. On peut choisir le mode de couplage -continu/alternatif à l’aide d’un contact à glissière sur le boîtier.
  • -
  • A2: Identique à A1, mais sans couplage alternatif.
  • -
  • A3: Entrée de mesure de tension pour \pm\ 3.3\ V. On peut -amplifier les signaux faibles en connectant une résistance entre Rg et -GND.
  • -
  • MIC: Entrée à microphone (à condensateur), son signal apparaît comme -le canal quatre de l’oscilloscope.
  • -
  • Rg: Résistance de gain pour A3. Gain = 1 + \frac{R_{g}}{100}. -Par exemple, si on connecte une résistance de 1\ k\Omega on obtient -un gain de 11.
  • -
-
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.1.html deleted file mode 100644 index 2e1f51df5f97410ef5bcf38a2a7e3dc9fc85968b..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.1.html +++ /dev/null @@ -1,39 +0,0 @@ - -
- -
-

Redressement demi-onde à l’aide d’une jonction PN

-

Objectif

-

Étudier le fonctionnement d’une diode à jonction PN comme redresseur. -Filtrage RC pour réduire les variations de tension (la composante -alternative).

-_images/halfwave.svg -_images/halfwave.png -

Procédure

- -

Discussion

-

La partie négative est ôtée par la diode comme montré sur la figure. -Noter aussi que la tension est diminuée de quelques 0,7V dans la moitié -positive, c’est la chute de tension aux bornes de la diode silicium, -quand le courant y passe. Une résistance de charge est nécessaire pour -que le circuit fonctionne correctement, on peut utiliser plus de -1~k\Omega, mais NE PAS utiliser de valeurs plus faibles, comme la source -courant alternatif ne peut pas fournir un courant de plus de 5~mA.

-

On peut voir que le condensateur se charge puis qu’il maintient la -tension pendant la partie manquante du cycle.

-

Peut-on utiliser des condensateurs de grande capacité pour réduire la -fluctuation de tension?

-

Durant quelle partie du cycle le courant traverse-t-il la diode?

-

Qu’est qui conditionne la valeur du courant crête?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.10.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.10.html deleted file mode 100644 index 6a035d2b4566b0e968ebb4f6765b2aed472b2ca7..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.10.html +++ /dev/null @@ -1,39 +0,0 @@ - -
- -
-

Diviseur d’horloge

-

Objectif

-

Étudier un diviseur d’horloge, à l’aide d’une bascule D (famille TTL, -7474).

-

Procédure

-_images/clock-divider.svg - -

Discussion

-

La sortie est basculée à chaque front montant sur l’entrée, si bien que -la fréquence est divisée par deux. Le signal de sortie est un signal -carré symétrique, même si le signal d’entrée a un rapport cyclique -différent. La tension de sortie HAUTE d’un circuit intégré TTL est -proche de 4V seulement.

- --- - - - - - - -
_images/clock-divider.png -_images/clock-divider2.png -
Figure 3.1 Un circuit diviseur d’horloge, à l’aide d’une bascule D. Les -sorties pour deux types différents de signal d’entrée sont montrées
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.11.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.11.html deleted file mode 100644 index fa2b4f321f28c64fbf4ab9da1a968444817e748d..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.11.html +++ /dev/null @@ -1,43 +0,0 @@ - -
- -
-

Caractéristique U-I d’une diode

-

Objectif

-

Tracer la caractéristique U-I d’une diode et comparer les résultats avec -la théorie.

-

Procédure

-_images/diode_iv.svg -_images/diode-iv-screen.png - -

Discussion

-

La caractéristique U-I d’une jonction PN idéale est donnée par -l’équation -I = I_0 \times e^{(qU/kT) − 1}, où -I_0 est le courant de saturation inverse, q la charge de -l’électron, k la constante de Boltzmann, T la température en Kelvin. -Pour une diode réelle, non-idéale, l’équation est -I = I_0 \times e^{(qU/nkT) − 1}, où n -est le facteur d’idéalité, qui vaut 1 pour une diode idéale. Pour des -diodes réelles il varie entre 1 et 2. On a utilisé une diode au silicium -1N4148. La valeur de n pour 1N4148 est proche de 2. On a calculé la -valeur de n en modélisant les valeurs expérimentales par l’équation.

-

La tension à laquelle une DEL commence à émettre de la lumière dépend de -sa longueur d’onde et de la constante de Planck. L’énergie d’un photon -est donnée par E = h\nu  = hc/\lambda. Cette énergie est égale au -travail d’un électron qui franchit un seuil de potentiel, qui est donné -par E = eU_0. Donc la constante de Planck est -h = eU_0 \times \lambda / c, où \lambda est la longueur d’onde de la -DEL, e la charge de l’électron et c la vitesse de la lumière.

-

Recommencer cette expérience en chauffant la diode à différentes -températures.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.12.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.12.html deleted file mode 100644 index 63bd7ac065505c0a507c24200a4910e0d9ea4589..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.12.html +++ /dev/null @@ -1,31 +0,0 @@ - -
- -
-

Caractéristique de la sortie (CE) d’un transistor

-

Objectif

-

Tracer la courbe caractéristique de sortie d’un transistor. Le -collecteur est connecté à PV1 à travers une résistance de 1~k\Omega.

-_images/transistor_out.svg -_images/transistor-ce.png -

Procédure

- -

Discussion

-

Les courbes caractéristiques pour différentes valeurs du courant de base -sont montrées sur la figure. Le courant de collecteur est obtenu à -partir de la différence de potentiel aux bornes de la résistance de -1~k\Omega.

-

Le courant de la base dépend du réglage de la source de tension à -l’extrémité d’une résistance de 100~k\Omega, l’autre extrémité étant -connectée à la base. La valeur du courant de base est calculée par -I_b = (U_{PV2} − U_{A2})/(100 \times 10^3) \times 10^6~\mu A. -Si A2 n’est pas connectée, le code considère une valeur de 0,6V pour la -base afin de calculer le courant dans celle-ci.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.13.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.13.html deleted file mode 100644 index 95bb4f373db92279c26776b83e3834f76a4ee61b..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.13.html +++ /dev/null @@ -1,33 +0,0 @@ - -
- -
-

Transmission d’un signal Opto-électrique

-

Objectif

-

Démontrer la transmission de signaux à l’aide de lumière. Une DEL est -alimentée par un signal de fréquence 1kHz et on dirige sa lumière vers -un photo-transistor.

-_images/opto-electric.svg -_images/opto-electric-transmission.png -

Procédure

- -

Discussion

-

L’entrée SEN est connectée à 5V à travers une résistance de -5,1~k\Omega. La sortie du photo-transistor crée un signal de fréquence -1~kHz comme montré sur la figure. Le signal carré est la tension qui -alimente la DEL. Quand la DEL est allumée, le photo-transistor est -conducteur et la tension au collecteur tombe à 0,2~V. Quand la DEL -est éteinte le transistor passe en mode isolant et le collecteur remonte -à la tension de l’alimentation. Les temps de montée et de descente du -photo-transistor semblent être différents. Trouver la limite haute en -fréquence à laquelle le photo-transistor est capable de répondre.

-

Recommencer cette expérience avec une fibre optique pour guider la -lumière depuis la DEL jusqu’au photo-transistor.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.2.html deleted file mode 100644 index bee1ffd6347167862bb60f63653a8f4a5eca4c33..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.2.html +++ /dev/null @@ -1,30 +0,0 @@ - -
- -
-

Redressement double alternance avec des jonctions PN

-

Objectif

-

Réaliser un redresseur double alternance, à l’aide de deux diodes. Il -faut deux signaux alternatifs, déphasés de 180 degrés. Ceux-ci sont -fournis par WG et \overline{WG}.

-_images/fullwave.svg -_images/fullwave.png -

Procédure

- -

Discussion

-

On laisse comme exercice à l’utilisateur de réduire la fluctuation de -tension à l’aide d’un condensateur. Cette expérience est seulement là -pour montrer le fonctionnement d’une redressement double alternance, il -ne peut pas produire beaucoup plus que quelques milliampères de courant.

-

En quoi un redressement double alternance est-il supérieur à un -redressement simple alternance?

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.3.html deleted file mode 100644 index 7f4a18e8a0aed04425b42d2d54bb896675aa134d..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.3.html +++ /dev/null @@ -1,23 +0,0 @@ - -
- -
-

Écrêtage à l’aide d’une diode à jonction PN

-

Objectif

-

Démontrer l’écrêtage d’un signal alternatif à différents niveaux, à -l’aide d’une diode à jonction PN.

-_images/clipping.svg -_images/clipping.png -

Procédure

- -

Discussion

-

Le niveau d’écrêtage est conditionné par la tension continue appliquée -et par la chute de tension de la diode.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.4.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.4.html deleted file mode 100644 index dc4bccb5a46a7fd18ab681f2f73d92448a098615..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.4.html +++ /dev/null @@ -1,23 +0,0 @@ - -
- -
-

Décalage à l’aide d’un diode à jonction PN

-

Objectif

-

Démontrer le décalage d’un signal alternatif à différents niveaux, à -l’aide d’une diode à jonction PN

-_images/clamping.svg -_images/clamping.png -

Procédure

- -

Discussion

-

Le niveau de décalage est conditionné par la tension continue appliquée -et par la chute de tension de la diode.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.5.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.5.html deleted file mode 100644 index e7f2777af32f943b2ab43f4b09c2e5de2061ad80..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.5.html +++ /dev/null @@ -1,30 +0,0 @@ - -
- -
-

Oscillateur à IC555

-

Objectif

-

Câbler un circuit de multivibrateur astable à l’aide d’un IC555, mesurer -la fréquence et le rapport cyclique de la sortie.

-_images/osc555.svg -_images/ic555-screen.png -

Le circuit est présenté sur la figure. La fréquence est données par -f = 1 /(\ln 2 \times C \times (R_1 + 2 R_2). La durée -HAUTE est donnée par -\ln 2 \times C \times (R_1 + R_2) -et la durée BASSE par \ln 2 \times C \times R_2.

-

Procédure

- -

Discussion

-

Le signal de sortie est montré sur la figure. Changer la valeur des -résistances et du condensateur, puis comparer la fréquence et le rapport -cyclique avec les valeurs calculées.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.6.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.6.html deleted file mode 100644 index 40d4626861d730b706ce14e074a3e51b99da8b19..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.6.html +++ /dev/null @@ -1,24 +0,0 @@ - -
- -
-

Amplificateur inverseur

-

Objectif

-

Câbler un amplificateur inverseur à l’aide d’un ampli-op et le tester.

-_images/opamp-inv.svg -

Procédure

- -

Discussion

-

On peut observer le gain par l’amplitude, mais aussi le déphasage dans -les résultats.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.7.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.7.html deleted file mode 100644 index f88487e590ed98b43b57794ae2c7b98930e60a1c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.7.html +++ /dev/null @@ -1,25 +0,0 @@ - -
- -
-

Amplificateur non-inverseur

-

Objectif

-

Câbler un amplificateur non-inverseur à l’aide d’un ampli-op et le -tester.

-_images/opamp-noninv.svg -

Procédure

- -

Discussion

-

On peut observer le gain par l’amplitude, mais aussi le déphasage dans -les résultats.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.8.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.8.html deleted file mode 100644 index 7b1196bcc55ab63512ee6798239e6d8d6651a133..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.8.html +++ /dev/null @@ -1,24 +0,0 @@ - -
- -
-

Intégrateur à ampli-op

-

Objectif

-

Câbler un intégrateur à ampli-op et le tester.

-_images/opamp-int.svg -

Procédure

- -

Discussion

-

On peut observer le gain par l’amplitude, mais aussi le déphasage dans -les résultats.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.9.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/3.9.html deleted file mode 100644 index 108749417ee16397c9b0fe6085df8cb4eacb87fd..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/3.9.html +++ /dev/null @@ -1,28 +0,0 @@ - -
- -
-

Portes logiques

-

Objectif

-

Étudier des portes logiques en utilisant SQ1 et PV1 comme entrées, avec -des circuits intégrés de portes logiques TTL 7408 and 7432.

-

Procédure

-_images/logic-gates.svg - -

Discussion

-

Le fonctionnement de la porte logique sera évident à partir des trois -signaux. On peut décaler les traces verticalement pour les séparer et -les rendre plus claires.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.1.html deleted file mode 100644 index 9403faa856d6e835a98028f7feb04c117e88a333..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.1.html +++ /dev/null @@ -1,45 +0,0 @@ - -
- -
-

Circuits RLC, réponse en régime stationnaire

-

Objectif

-

Étudier le comportement de dipôle RLC dans un circuit en courant -alternatif. Trois combinaisons différentes peuvent être étudiées.

-_images/RCsteadystate.svg -_images/RLsteadystate.svg -_images/RLCsteadystate.svg -

Procédure

- -

Discussion

-

La tension alternative de la source est en A1 et la tension aux bornes -de la résistance en A2. Si on soustrait les valeurs instantanées de A2 -de A1 on obtient la tension totale aux bornes de L et C. IL faut -utiliser un bobinage avec une résistance négligeable pour de bons -résultats. Le déphasage entre courant et tension est donnée par -\Delta \Phi = \arctan((Z_C − Z_L)/Z_R).

-

La tension totale, la tension aux bornes de R et la tension aux bornes -de LC sont montrées dans la figure. Le diagramme de phase montre le -déphasage entre courant et tension. Le bobinage utilisé dans -l’expérience a une inductance d’environ 10~mH et une résistance de -20~\Omega.

-

À 1600~Hz, Z_C \simeq Z_L et la tension aux bornes -de LC est déterminée par la résistance du bobinage. À la fréquence de -résonance, la tension aux bornes de LC sera minimale, déterminée par la -résistance du bobinage. L’entrée A3 est connectée entre L et C, si bien -que les tensions individuelles de L et C peuvent être présentées.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.2.html deleted file mode 100644 index bb2b1d9813263c80f6c55881c79b0501c5935186..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.2.html +++ /dev/null @@ -1,38 +0,0 @@ - -
- -
-

Réponse de circuits RC en régime transitoire

-

Objectif

-

Tracer l’évolution de la tension aux bornes d’un condensateur, quand il -est chargé en appliquant un échelon de tension à travers une résistance. -Calculer la valeur de la capacité d’après la courbe.

-_images/RCtransient.svg -_images/RCtransient.png -

Procédure

- -

Discussion

-

Quand on applique un échelon de 0 à 5V, la tension aux bornes du -condensateur s’approche exponentiellement de 5V comme montré sur la -figure. En modélisant la courbe de décharge par -U(t) = U_0 \times e^{− t/RC} , on -peut extraire la constante de temps RC et s’en servir pour trouver la -valeur de la capacité.

-

Le tension aux bornes d’un condensateur ne varie exponentiellement que -quand on le charge au travers d’un dipôle linéaire, une résistance par -exemple. Si on le charge à l’aide d’une source de courant constant, la -tension change linéairement, puisque Q = It = CU , et la tension -croît linéairement avec le temps comme -U = (I/C) \times t.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.3.html deleted file mode 100644 index 0435c4ec9b101b1f5c3371be1978fb3525bf4e7d..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.3.html +++ /dev/null @@ -1,46 +0,0 @@ - -
- -
-

Réponse transitoire de circuits RL

-

Objectif

-

Explorer la nature du courant et de la tension quand un échelon de -tension est appliqué à une résistance et un bobinage en série. En -mesurant la tension en fonction du temps aux bornes du bobinage, on peut -calculer son inductance.

-_images/RLtransient.svg -_images/RLtransient.png -

Dans un circuit RL, U = RI + L(dI/dt) , équation -qui se résout en -I = I_0 \times e^{− (R/L)t}. Le -coefficient du terme exponentiel R/L peut être déduit du graphique de la -tension aux bornes du bobinage. La résistance du bobinage doit être -incluse dans les calculs, R = R_{ext} + R*_L.

-

Procédure

- -

Discussion

-

La réponse transitoire du circuit RL est montrée sur la figure. La -courbe exponentielle est modélisée pour extraire la valeur de L/R. La -résistance de la bobine est mesurée en la comparant avec la résistance -externe connue, en courant continu. A2 est connecté à OD1 pour une -mesure plus précise de la résistance du bobinage.

-

Les tensions appliquées sont positives, mais le graphique va vers des -tensions négatives, pourquoi?

-

Quel était le courant avant le début de l’échelon 5->0V? Quelle est la -force contre-électromotrice (fcem)?

-

Recommencer avec deux bobinages en série, (a) en les plaçant l’un loin -de l’autre, (b) en les plaçant l’un sur l’autre, (c) après changement -d’orientation de l’un des deux. On peut voir l’effet de l’induction -mutuelle.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.4.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.4.html deleted file mode 100644 index 34df09e542bc27247bfad765c430ca7367aecdef..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.4.html +++ /dev/null @@ -1,37 +0,0 @@ - -
- -
-

Réponse transitoire de circuit RLC

-

Objectif

-

Explorer la nature oscillatoire de la mise en série de L et C. La -fréquence de résonance d’un circuit LC série est donnée par -f_0 = 1/(2\pi\sqrt{LC}). Le facteur d’amortissement -est R/(2\sqrt{LC}), et il vaut 1 pour -l’amortissement -critique (http://en.wikiversity.org/wiki/RLC_circuit). Selon les -valeurs de C/L et R, la réponse peut être sous-amortie, amortie de façon -critique ou sur-amortie.

-_images/RLCtransient.svg -_images/RLC-curves.png -

Procédure

- -

Discussion

-

On a utilisé le bobinage de 3000 tours et le condensateur de 0,1~\mu F.La -tension aux bornes du condensateur est montrée sur la figure après un -échelon 5->0V. La fréquence de résonance mesurée est conforme à -f = 1/(2\pi\sqrt{LC}), compte tenu de la tolérance sur -les valeurs des composants.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.5.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.5.html deleted file mode 100644 index b001ed534ddf30770279df81ae00f776e267d01b..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.5.html +++ /dev/null @@ -1,32 +0,0 @@ - -
- -
-

Différenciation et intégration RC

-

Objectif

-

Les circuits RC peuvent intégrer ou différencier un signal de tension -par rapport au temps. Si on intègre un signal carré on obtient un signal -triangulaire et si on différencie on obtient des pics aux -transitions.

-_images/RCintegration.svg -_images/RCsteadystate.svg -

Procédure

- -

Discussion

-

L’intégration d’un signal triangulaire donne une forme parabolique et la -différenciation donne une forme carrée. La différenciation ne peut être -montrée qu’à basse fréquence. Essayer cela pour d’autres formes de -signaux, par exemple signal carré. Si on intègre un signal carré on est -censé obtenir un signal triangulaire.

-_images/RCintegration.png -_images/RCdifferentiation.png -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.6.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.6.html deleted file mode 100644 index e7c494b1d2d5fcdee9197a1a98495912d4a741d8..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.6.html +++ /dev/null @@ -1,36 +0,0 @@ - -
- -
-

Analyse de Fourier

-

Objectif

-

Étudier la transformée de Fourier d’un signal. Représentations -temporelle et fréquentielle d’un signal.

-

Procédure

- -

Discussion

-

Dans le graphique de la transformée de Fourier, la fréquence est sur -l’axe x et l’axe y montre l’intensité relative des composants -fréquentiels du signal. On appelle ça la représentation -fréquentielle (http://en.wikipedia.org/wiki/Fourier_transform). -Dans le cas du signal sinusoïdal il y a un seul pic dominant, les pics -plus petits sont une mesure de la distorsion du signal sinusoïdal.

-

Un signal carré peut être représenté comme -f(\theta) = \sin(\theta) + \sin(3\theta)/3 + \sin(5\theta)/5 + ⋯. -Dans la transformée de Fourier d’un signal carré de fréquence f , il y -aura un composant 3f (dont l’amplitude est le tiers du composant f), -un composant 5f (amplitude un cinquième), etc. comme montré sur -la figure.

-_images/sqwaveFFT.png -_images/sinewaveFFT.png -
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.7.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/4.7.html deleted file mode 100644 index d304a0c7d99821cdf49390775d5eac095bee3fbb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/4.7.html +++ /dev/null @@ -1,35 +0,0 @@ - -
- -
-

Induction électromagnétique

-

Objectif

-

Explorer la tension induite aux bornes d’un bobinage par un champ -magnétique variable, en laissant tomber un petit aimant cylindrique à -travers le bobinage. On utilise un tube pour guider l’aimant à travers -le bobinage.

-_images/induction.svg -_images/induction-screen.png -

Procédure

- -

Discussion

-

Le résultat est montré sur la figure. L’amplitude augmente avec la -vitesse de l’aimant. D’après le graphique, on peut déterminer le temps -que met l’aimant à traverser le bobinage.

-

Le deuxième pic est plus grand que le premier. Pourquoi? À quel endroit -est censé se trouver l’aimant quand la tension induite passe par zéro? -Laisser tomber l’aimant depuis différentes hauteurs et faire un -graphique de la tension crête en fonction de la racine carrée de la -hauteur de chute.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/5.1.html deleted file mode 100644 index 6842921f581f3c1b0f1dc832c9b7d90c202f3f53..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.1.html +++ /dev/null @@ -1,23 +0,0 @@ - -
- -
-

Réponse en fréquence d’un piézo

-

Objectif

-

Faire le graphique de la courbe de réponse d’un disque piézo en scannant -la fréquence et en mesurant l’amplitude à la sortie du microphone.

-_images/sound-capture.svg -_images/piezo-freq-resp.png -

Procédure

- -

Discussion

-

Le graphique de l’amplitude en fonction de la fréquence est montré sur -la figure. L’amplitude est maximale près de 3500Hz.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/5.2.html deleted file mode 100644 index b505a67894ecdf6a773e27e4143ed44b73153c98..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.2.html +++ /dev/null @@ -1,54 +0,0 @@ - -
- -
-

Vitesse du son

-

Objectif

-

Calculer la vitesse du son en mesurant les variation de pression selon -la distance.

-

Le son voyage comme une série de compressions et d’expansions. La figure -5.1↓(a) montre les régions de haute et basse -pression le long de la direction de propagation, en même temps que la -sortie d’un capteur de pression aux positions correspondantes.

-

On peut faire un graphique des variations de pression à tout point en -synchronisation avec la variation au point de départ. La phase de la -sortie du microphone change quand on modifie sa distance au piézo. Quand -on le déplace d’une longueur d’onde, la phase change de 360°. Si la -phase change de X degrés pour un changement de la distance de \Delta D, -la longueur d’onde est donnée par \lambda = (360 \times \Delta D)/X. On -obtient la vitesse du son en multipliant cela par la fréquence.

- --- - - - - - - -
_images/sound_waves.png -_images/sound-velocity.svg -
Figure 5.1 (a) compressions et expansions le long de la direction de -propagation d’un son. (b) schéma de montage
-

Procédure

- -

Discussion

-

À 3500Hz, un changement de distance de 2cm provoque un changement de -phase de 176° à 102°. À l’aide de l’équation, -v = f \times (360 \times \Delta D)/X, v = 3500 \times (360 \times 2)/(176 − 102) = 34054~cm\cdot s^{−1}. -Il est important de conserver le microphone et le disque piézo sur le -même axe pour des résultats précis.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/5.3.html deleted file mode 100644 index c0ebfca671cb5eafaf9ff0a07c83c74d6dff2142..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/5.3.html +++ /dev/null @@ -1,29 +0,0 @@ - -
- -
-

Battements sonores

-

Objectif

-

Étudier les interférences sonores de deux sources individuelles. Deux -buzzers piézo sont alimentés par deux sources indépendantes, et le son -est envoyé vers un microphone.

-_images/sound-beats.svg -

Procédure

- -

Discussion

-

Sur la figure on peut voir comment l’enveloppe de basse fréquence -apparaît. La durée entre deux instants de pression minimale, sur -l’enveloppe, correspond à la demi-fréquence des battements. La -transformée de Fourier est montrée sur la figure.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/6.1.html deleted file mode 100644 index b7df8d4df85222e230641b3837c7b960e9f4d2f6..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.1.html +++ /dev/null @@ -1,37 +0,0 @@ - -
- -
-

Accélération de la pesanteur à l’aide d’un pendule pesant

-

Objectif

-

Mesurer la période des oscillations d’un pendule pesant à l’aide d’une -barrière photo-électrique et calculer l’accélération de la pesanteur. La -période des oscillations d’une tige uniforme autour d’une de ses -extrémités est donnée par T = 2\pi\sqrt{2l/3g}, où l est la -longueur et g est l’accélération de la pesanteur. Le pendule (en forme -de T, un bord de couteau fixé à une tige de diamètre 6mm) est mis à -osciller entre une DEL et un photo-transistor, connectés à ExpEYES. La -DEL et le photo-transistor sont montés sur un support en forme de U -comme le montre la figure.

-_images/rod-pendulum.svg -_images/light-barrier-photo.jpg -

Procédure

- -

Discussion

-

La période est mesurée 50fois, à l’aide d’un pendule pesant de -14,6cm, et la valeur moyenne est 0,627s. La valeur calculée de -g est 977,4~cm\cdot s^{-2}, légèrement différente de la -valeur réelle pour les raisons suivantes: La longueur est mesurée -depuis le bord du couteau jusqu’au bas de la tige et utilisée dans la -formule. Mais il y a un peu de masse présente au-dessus du fil du -couteau qui n’est pas comprise dans le calcul. Une autre raison peut -être que le pendule n’est peut-être pas exactement vertical dans la -position de repos.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.2.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/6.2.html deleted file mode 100644 index 1320198767988214f759f18edacff9aa32924dc8..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.2.html +++ /dev/null @@ -1,32 +0,0 @@ - -
- -
-

Vitesse angulaire d’un pendule

-

Objectif

-

Étudier la nature des oscillations d’un pendule. Un encodeur angulaire -est nécessaire pour mesurer le déplacement angulaire en fonction du -temps. Mais en utilisant un moteur à courant continu comme capteur, on -peut mesurer la vitesse angulaire en fonction du temps.

-_images/pendulum-screen.png -

Procédure

- -

Discussion

-

Le signal obtenu est montré sur la figure. Quand on le modélise par une -équation -A = A_0 \sin(\omega t + \theta) \exp( − Dt) + C, à -l’aide de Grace, on a obtenu une fréquence angulaire de 10~Hz.

-

Il convient de réaliser le pendule avec une masselotte assez lourde et -une tige légère qui la relie à l’axe du moteur. Dans ce cas, le moteur à -courant continu se comporte en générateur et la tension est -proportionnelle à la vitesse angulaire.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.3.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/6.3.html deleted file mode 100644 index adfcd19464d19017fae49fda4a369e77cb991291..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.3.html +++ /dev/null @@ -1,33 +0,0 @@ - -
- -
-

Résonance d’un pendule forcé

-

Objectif

-

Démontrer la résonance d’un pendule forcé.

-_images/driven-pendulum.svg -_images/resonance-pendulum.jpg -

Procédure

-

Réaliser un pendule avec deux aimants boutons et un morceau de papier. -Le suspendre et placer la bobine de 3000tours à proximité, comme montré -sur la figure.

- -

Discussion

-

Quand SQ1 atteint la fréquence de résonance du pendule, son amplitude -augmente. Un pendule long de 4cm (du centre des aimants à l’axe de -rotation) a résonné à environ 2,5~Hz, presque conformément à la -fréquence naturelle calculée. La fréquence de résonance est donnée par -f = 1/(2\pi\sqrt{g/l}), où l est la distance du centre de -l’aimant au point de suspension et g est l’accélération de la -pesanteur.

-

Recommencer l’expérience en modifiant la longueur du pendule.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.4.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/6.4.html deleted file mode 100644 index 29b2c49bc7b20135d223bf8e9484faad3ae1130c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.4.html +++ /dev/null @@ -1,26 +0,0 @@ - -
- -
-

Mesure de distance, par écho ultrasonore

-

Objectif

-

Mesurer une distance en mesurant le temps que prend une salve de -fréquence 40~kHz à faire un écho contre une surface dure.

-

Procédure

-_images/sr04-dist.svg - -

Discussion

-

La distance est calculée à partir du temps que met une salve sonore à -parcourir aller-retour (en écho) la distance qui sépare le module de la -surface réfléchissante. On peut mesurer la distance en fonction du -temps, ce qui permet de calculer vitesse, accélération, etc.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.5.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/6.5.html deleted file mode 100644 index 6944029fd94b21f643698a0e32a3d06916722a37..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/6.5.html +++ /dev/null @@ -1,42 +0,0 @@ - -
- -
-

Mesure de température à l’aide d’une sonde PT100

-

Objectif

-

Enregistrer la température d’un liquide à l’aide d’un thermomètre à -résistance de platine. La résistance d’un module PT100 est dépendante de -la température par la relation -R(T) = R_0 (1 + AT + BT^2), où -A = 3,9083 \times 10^{−3} et B =  − 5,775 \times 10^{−7}.

-_images/pt100.svg -_images/pt100-screen.png -

Procédure

- -

Discussion

-

Un graphique de refroidissement de l’eau d’un récipient est montré sur -la figure.

-

Pour mesurer la résistance d’un élément PT100, on le connecte entre CSS -et GND et on mesure la tension à ses bornes. Il est possible de mesurer -la valeur exacte de CSS à l’aide d’un multimètre ou en mesurant la -tension aux bornes d’une résistance connue. L’entrée de A3 est amplifiée -11fois en connectant une résistance de 1~k\Omega entre Rg et GND.

-

La résistance d’une sonde PT100 est 1000~\Omega à 0^\circ C. Elle change -pratiquement de 0,4~\Omega /^\circ C, modifiant la tension de -0, 4~mV. La -sortie du convertisseur analogique numérique change d’un bit de poids -faible pour un changement de 1,22~mV dans la tension d’entrée, donc -un changement de température de moins de 3°C ne serait pas toujours -détecté. On utilise un amplificateur non-inverseur pour augmenter la -résolution. Le gain de cet amplificateur doit être tel que la -température maximale mesurée donne une tension de sortie inférieure à -3,3V. Modifier le champ «gain» selon.

-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/7.1.html b/ExpEYES17/UserManual/fr/rst/qt5HTML/7.1.html deleted file mode 100644 index 75e0adf5d3462ec8df13aa473e912ba0622730f8..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/7.1.html +++ /dev/null @@ -1,329 +0,0 @@ - -
- -
-

Note

-

Les programmes à interface graphique décrit dans les chapitres -précédents sont prévus pour un ensemble fini d’expériences. Pour -développer de nouvelles expériences, on doit savoir comment accéder -aux fonctionnalités d’expEYES par logiciel. Les appels de fonctions -importants pour communiquer avec l’appareil sont donnés ci-dessous.

-
-
-

Établir la Connexion

-

Pour accéder au matériel de EYES17, les modules Python pour eyes17 -doivent être installés. Il sont censés se trouver dans un répertoire -nommé eyes17, qui pourrait être dans votre répertoire personnel -ou sur le «Python PATH».

-

Tout programme doit commencer par les deux lignes suivantes:

-
import eyes17.eyes
-p = eyes17.eyes.open()
-
-
-

La variable p est l’objet logiciel qui représente le matériel.

-

Les sections suivantes expliquent les appels de fonctions Python pour -accéder au matériel EYES17. Chaque appel de fonction est expliquer -avec un exemple d’utilisation.

-
-
-

set_pv1(v), set_pv2(v)

-

Règle la tension continue en PV1 et PV2. L’intervalle pour PV1 est -de -5 à 5. L’intervalle pour PV2 est de -3,3 à 3,3.

-
print p.set_pv1(4)
-print p.set_pv2(2.1)
-
-
-

La valeur assignée à la sortie est affichée. Mesurer les tensions -avec un voltmètre.

-
-
-

get_voltage(entree)

-

Renvoie la tension de l’entrée spécifiée.

-
print p.get_voltage('A1')
-print p.get_voltage('A2')
-print p.get_voltage('A3')
-print p.get_voltage('MIC')
-print p.get_voltage('SEN')
-
-
-

Connecter PV1 à A1, et utiliser set_pv1() et get_voltage('A1') -ensemble. Cette fonction ajuste le calibre d’entrée par essais et -erreurs, selon la valeur du signal d’entrée.

-
-
-

get_voltage_time(entree)

-

Renvoie un tuple, qui contient le timbre à date de l’ordinateur et -la tension à l’entrée spécifiée.

-
print p.get_voltage_time('A1')
-
-
-
-
-

get_resistance()

-

Renvoie la valeur de la résistance connectée à SEN, qui devrait être -entre 100~\Omega et 100~k\Omega pour une précision raisonnable.

-

..code-block:: python

-
-
print p.get_resistance()
-
-
-

get_capacitance()

-

Renvoie la valeur de la capacité connectée en IN1 (fonctionne bien -dans le domaine du pF)

-
print p.get_capacitance()
-
-
-
-
-

get_version()

-

Renvoie la version du firmware.

-
print p.get_version()
-
-
-
-
-

get_temperature()

-

Renvoie la température du processeur à l’intérieur de EYES17

-
print p.get_temperature()
-
-
-
-
-

set_state(SORTIE=valeur)

-

Règle l’état logique de la sortie OD1, SQ1, etc. Connecter OD1 à A1 -et lancer:

-
p.set_state(OD1=1)
-print p.get_voltage('A1')
-
-
-
-
-

set_sine(fequence)

-

Génère le signal sinusoïdal de la fréquence demandée sur WG (intervalle -de 5~Hz à 5000~Hz). Toutes les valeurs intermédiaires ne sont -pas possibles, la fonction renvoie la valeur effectivement adoptée.

-
print p.set_sine(502)
-
-
-

502.00803

-
-
-

set_sine_amp(amplitude)

-

L’amplitude peut être réglée à trois valeurs prédéfinies de tension -crête(0 pour avoir 80~mV, 1 pour avoir 1~V, 3 pour avoir 3~V).

-
p.set_sine_amp(2)
-
-
-

Règle l’amplitude à 3~V crête.

-
-
-

set_sqr1(frequence)

-

Règle la fréquence de la sortie SQ1 (intervalle de 4~Hz à 1~MHz). -Toutes les valeurs intermédiaires ne sont pas possibles, la fonction -renvoie la valeur effectivement adoptée.

-
print p.set_sqr1(15030)
-
-
-

15030.53

-
-
-

set_sqr1_slow(frequence)

-

Règle la fréquence de la sortie SQ1 (intervalle de 0,1~Hz à 1~MHz). -Toutes les valeurs intermédiaires ne sont pas possibles, la fonction -renvoie la valeur effectivement adoptée. La résolution est fine mais -WG est désactivé quand on commande SQ1 de cette façon.

-
print p.set_sqr1_slow(0.5)
-
-
-
-
-

set_sqr2(frequence)

-

Similaire à set_sqr1() mais SQ2 n’est pas disponible en même temps -que WG, une seule des deux sorties est utilisable à la fois.

-
-
-

set_sqr1(frequence, rapportCyclique)

-

Règle la fréquence de la sortie SQ1 (intervalle de 0,1~Hz à 1~MHz). -Toutes les valeurs intermédiaires ne sont pas possibles, la fonction -renvoie la valeur effectivement adoptée.

-
print p.set_sqr1(1000, 30)          #1000 ~Hz, rapport cyclique 30%
-
-
-
-
-

get_freq(entree)

-

Mesure la fréquence d’un signal carré sur l’entrée, IN2 ou SEN. Connecter -SQ1 à IN2 et lancer le code:

-
p.set_sqr1(1000)
-print p.get_freq('IN2')
-
-
-
-
-

duty_cycle(entree)

-

Mesure le rapport cyclique d’un signal carré , IN2 ou SEN. Connecter -SQ1 à IN2 et lancer le code:

-
p.set_sqr1(1000, 30)
-print p.duty_cycle('IN2')
-
-
-
-
-

r2ftime(entree1, entree2)

-

Mesure l’intervalle de temps entre un front montant sur input1 jusqu’à -un front descendant sur input2, les entrées peuvent éventuellement -être les mêmes. On peut l’utiliser pour tester un signal carré.

-

Connecter SQ1 à IN2 et lancer le code:

-
p.set_sqr1(1000, 30)
-print p.r2ftime('IN2', 'IN2')
-
-
-

0.0003

-

Le signal carré à 1~kHz avec un rapport cyclique de 30% a une -période de 1~ms et reste à l’état HAUT durant 0,3~ms.

-
-
-

multi_r2rtime(entree, nbCycles)

-

Mesure l’intervalle de temps entre deux fronts montants de l’entrée -entree. La durée entre deux fronts montants est un cycle. -On peut spécifier le nombre cycles à mesurer, la valeur par défaut -étant 1. Les valeurs autorisées sont 1,2,4,8,12,16,32 et 48. On peut -tester ça avec un signal carré.

-

Connecter SQ1 à IN2 et lancer le code:

-
p.set_sqr1(1000)
-print p.multi_r2rtime('IN2', 8)
-
-
-

0.008

-
-
-

select_range(canal, calibre)

-

Les calibres pour A1 et A2 peuvent être réglés depuis \pm0.5~V -jusqu’à \pm16~V, à l’aide d’amplificateurs à gain programmable.

-
p.select_range('A1', 4)         # 4 volt maximum
-p.select_range('A1', 8)         # 8 volt maximum
-
-
-
-
-

capture1(entree, nbEchantillons, intervalleTemps)

-

Numérise l’entrée spécifiée. Le nombre d’échantillons peut aller jusqu’à -10000. La durée entre deux échantillons consécutifs est donnée en -microseconde (intervalle de 2 à 1000~\mu s).

-
print p.capture1('A1', 5, 5)
-
-
-

affichera deux tableaux de dates et de tensions.

-

Quand on a besoin de créer un graphique de la tension de sortie pour -une meilleure compréhension, on peut le faire à l’aide du module matplotlib, -importé grâce à l’interface pylab. Connecter WG à A1 à l’aide -d’un fil et lancer:

-
from pylab import *
-p.set_sine_amp(2)
-p.set_sine(1000)
-p.select_range('A1', 4)
-t,v = p.capture1('A1', 300, 10)
-plot(t,v)
-show()
-
-
-

Le résultat de ce code est donné ci-dessous.

-_images/sine.png -
-
-

capture2(nbEchantillons, intervalleTemps)

-

Numérise les entrées A1 et A2 simultanément. Le nombre d’échantillons -peut aller jusqu’à 10000. La durée entre deux échantillons consécutifs -est donnée en microseconde (intervalle de 2 à 1000~\mu s).

-

Connecter WG à A1, et une diode entre A1 et A2. Lancer le code ci-dessous:

-
from pylab import *
-p.set_sine_amp(2)
-p.set_sine(1000)
-p.select_range('A1', 4)
-t,v,tt,vv = p.capture2(300, 10)
-plot(t,v)
-plot(tt,vv)
-show()
-
-
-

Le résultat de ce code est donné ci-dessous.

-_images/halfwave.png -_images/capture4.png -
-
-

capture4(nbEchantillons, intervalleTemps)

-

Numérise les entrées A1, A2, A3 et MIC simultanément. Le nombre d’échantillons -peut aller jusqu’à 10000. La durée entre deux échantillons consécutifs -est donnée en microseconde (intervalle de 2 à 1000~\mu s).

-

Connecter WG à A3 et lancer le code donné ci-dessous. Le résultat -est montré ci-dessus.

-
from pylab import *
-p.set_sine_amp(2)
-p.set_sine(1000)
-p.select_range('A1', 4)
-res = p.capture4(300, 10)
-plot(res{[}4{]},res{[}5{]})        # A3
-plot(res{[}6{]},res{[}7{]})        # MIC
-show()
-
-
-
-
-

set_wave(frequence, typeDeSignal)

-

Si le paramètre wavetype n’est pas spécifié, cela génère -un signal en utilisant la table d’onde existante. Si wavetype -est spécifié 'sine' ou 'tria', la table d’onde -correspondante est chargée.

-
from pylab import *
-p.set_wave(1000, 'sine')
-p.set_wave(100)          # fréq. 100Hz avec la table existante
-x,y = p.capture1('A1', 500,50)
-plot(x,y)
-p.set_wave(100, 'tria')  # table d'onde triangulaire et 100 Hz
-x,y = p.capture1('A1', 500,50)
-plot(x,y)
-show()
-
-
-
-
-

load_equation(fonction, intervalle)

-

Crée la table d’onde en utilisant l’équation. Connecter WG à A1 et -lancer le code ci-dessous. Le résultat est montré plus bas.

-
from pylab import *
-
-def f1(x):
-    return sin(x) + sin(3*x)/3
-
-p.load_equation(f1, [-pi,pi])
-p.set_wave(400)
-x,y = p.capture1('A1', 500,10)
-plot(x,y)
-show()
-
-
-_images/loadEquation.png -_images/loadTable.png -
-
-

load_table(table)

-

On peut aussi charger la table d’onde avec un tableau de 512 éléments. -Connecter WG à A1 et lancer le code ci-dessous. Après l’opération -de valeur absolue, la table commence par 256, puis descend jusqu’à -0 et enfin remonte jusqu’à 255, ce qui trace un signal triangulaire. -Le résultat dû à ce tableau est montré ci-dessus.

-
from pylab import *
-x = arange(-256, 256)
-x = abs(x)
-p.load_table(x)
-p.set_wave(400)
-x,y = p.capture1('A1', 500, 10)
-plot(x,y)
-show()
-
-
-
- - -
- \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCdifferentiation.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCdifferentiation.png deleted file mode 100644 index 9518abdfa18c1d3c83d9b5713a71e4286cbc61e1..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCdifferentiation.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.png deleted file mode 100644 index 8cd7332b1f50b234c0f576574c2c1317851b497d..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.svg deleted file mode 100644 index 755de972a078900a89d562127782d473536613d2..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCintegration.svg +++ /dev/null @@ -1,48 +0,0 @@ - - -XCircuit Version 3.7 -File "RCintegration.ps" Page 1 - - - -R - - - - - - - - - - - - - - - - - - -C - - - - - -WG - - -A1 - - -A2 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCsteadystate.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCsteadystate.svg deleted file mode 100644 index c531f13f68703adfd1156217b717f2c2135c5b59..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCsteadystate.svg +++ /dev/null @@ -1,48 +0,0 @@ - - -XCircuit Version 3.7 -File "RCsteadystate.ps" Page 1 - - - -R - - - - - - - - - - - - - - - - - - -C - - - - - -WG - - -A1 - - -A2 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.png deleted file mode 100644 index 63ae39ab2b1fceb58b313d6ce3586757a329568c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.svg deleted file mode 100644 index 3cb63723187d75edf5700f2e83879d014d3624d4..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RCtransient.svg +++ /dev/null @@ -1,43 +0,0 @@ - - -XCircuit Version 3.7 -File "RCtransient.ps" Page 1 - - - - - - - -R - - -C - - - - - - - - - - - - - - - -OD1 - - -A1 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLC-curves.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLC-curves.png deleted file mode 100644 index 6b91159cba1a8fec07f4d4a955fedd86283c2681..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLC-curves.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCsteadystate.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCsteadystate.svg deleted file mode 100644 index 19ae53e2eb850a74a4aeab65534eaa05e3815cfe..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCsteadystate.svg +++ /dev/null @@ -1,338 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "RLCsteadystate.ps" Page 1 - - - - L - - - R - - - - - - - - - - - - - - - - - - - - - - - - - - - WG - - - - - C - - - - - - - optionnel - - - - - - A1 - - - - - - A2 - - - GND - - - A3 - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCtransient.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCtransient.svg deleted file mode 100644 index 11b9df2c9c9c6ac0b05101fd103bf609a9513431..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLCtransient.svg +++ /dev/null @@ -1,52 +0,0 @@ - - -XCircuit Version 3.7 -File "RLCtransient.ps" Page 1 - - - - -L - - -C - - - - - - - - - - - - - - - - - - - - - - - - -OD1 - - - - - -A1 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLsteadystate.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLsteadystate.svg deleted file mode 100644 index e009e2177c2e56a2d2caf57860cddb44dbb24ba4..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLsteadystate.svg +++ /dev/null @@ -1,53 +0,0 @@ - - -XCircuit Version 3.7 -File "RLsteadystate.ps" Page 1 - - - -R - - - - - - - - - - - - -WG - - - - -L - - - - - - - - - - - - - - -A1 - - -A2 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.png deleted file mode 100644 index d2bf7b6ae35d7bc7ea2eb78ccb15d3f9532fd1db..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.svg deleted file mode 100644 index aeef1cdfe868bb8a13377ba51e9fe1366a000eb7..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/RLtransient.svg +++ /dev/null @@ -1,59 +0,0 @@ - - -XCircuit Version 3.7 -File "RLtransient.ps" Page 1 - - - - - - -R - - -L - - - - - - - - - - - - - - - - - - - - - - - - - -A2 - - - - - - -OD1 - - -A1 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.png deleted file mode 100644 index d59653df787872eeb1c38a689df022c527226672..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.svg deleted file mode 100644 index 2340fda222626cd26e5406cd07f54619d639b274..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-dc.svg +++ /dev/null @@ -1,29 +0,0 @@ - - -XCircuit Version 3.7 -File "ac-dc.ps" Page 1 - - - -PV1 - - - - - - - - -A2 - - - WG - - -A1 - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-gen-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-gen-screen.png deleted file mode 100644 index 6eb7ec38ce488e9771476b7ebe411f0f4e24fdca..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-gen-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-generator.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-generator.svg deleted file mode 100644 index c670340e8d26cac8659cd20121495d2656e8a193..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ac-generator.svg +++ /dev/null @@ -1,314 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "ac-generator.ps" Page 1 - - - c.c. - - - Moteur - - - - - - - - Aimant - - - - - - - - A1 - - - - GND - - - - 1,5 V - - - Pile - - - - - - - Bobine - - - - - - A2 - - - - - - GND - - - - - - - - Bobine - - tournant - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-sep-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-sep-screen.png deleted file mode 100644 index 290579c4f798a3b49cb81da7367d4e69982990d2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-sep-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-separating.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-separating.svg deleted file mode 100644 index 7cd00934f458608156a7fc22ac69e1def78a5ba7..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/acdc-separating.svg +++ /dev/null @@ -1,230 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "acdc-separating.ps" Page 1 - - - - - - - - SQ1 - - - - - - A1 - - - - - - A2 - - - - - 1 µF - - - - - - - - - - - - GND - - - - - - 100 kΩ - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-measure.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-measure.svg deleted file mode 100644 index 9299a9bf6c30265ce57aa6da6b74c182eeda80d9..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-measure.svg +++ /dev/null @@ -1,31 +0,0 @@ - - -XCircuit Version 3.7 -File "cap-measure.ps" Page 1 - - - -IN1 - - -GND - - - - -C - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-parallel.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-parallel.svg deleted file mode 100644 index 73ce334ba86452c70f2d670ef3f38701afffe790..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-parallel.svg +++ /dev/null @@ -1,193 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "cap-parallel.ps" Page 1 - - - IN1 - - - GND - - - - - C1 - - - - - - - - - - - - - - C2 - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-series.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-series.svg deleted file mode 100644 index 0875546d6c389bbd59a99b8fa3da50e269fe189f..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/cap-series.svg +++ /dev/null @@ -1,38 +0,0 @@ - - -XCircuit Version 3.7 -File "cap-series.ps" Page 1 - - - -IN1 - - -GND - - - - -C1 - - - - - - - - - - - - - -C2 - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/capture4.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/capture4.png deleted file mode 100644 index 6b59bfd87738777545e8b8dfb8ae42b41e2639b7..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/capture4.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.png deleted file mode 100644 index 16ea46097f559f0b2d8a510bcfc5a6558a33a705..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.svg deleted file mode 100644 index 31f55b296c1022c9393de139336ee4532ee4c044..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clamping.svg +++ /dev/null @@ -1,253 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "clamping.ps" Page 1 - - - - - - - - - - - - - - - - - - - 100 Ω - - - - - - - - - - 1 µF - - - WG - - - A1 - - - PV1 - - - GND - - - A2 - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.png deleted file mode 100644 index 519926f3ccf46e648fe914ba52a203cc6326b090..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.svg deleted file mode 100644 index 0678eb9f2893832157cae75de19566d9c0c91979..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clipping.svg +++ /dev/null @@ -1,223 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "clipping.ps" Page 1 - - - - - - - - - - - - - - - - - - - - - 10 kΩ - - - - WG - - - A1 - - - A2 - - - - - - PV1 - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.png deleted file mode 100644 index abdcf446ba54beeb607484c17b0ea87ec58ec743..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.svg deleted file mode 100644 index 199ac1c21b402adb30c7c6f043a39783873750ce..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider.svg +++ /dev/null @@ -1,85 +0,0 @@ - - -XCircuit Version 3.7 -File "clock-divider.ps" Page 1 - - - -Q - - -Q - - - - -CK - - -D - - - -SQ1 - - - -A2 - - - -3 - - - - - -2 - - -5 - - -6 - - -7 - - - -14 - - -GND - - - -5V - - - -7474 - - - - - - - - - - - - -A1 - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider2.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider2.png deleted file mode 100644 index 66e569e7e49204ed85e0bdbad86521421d7339f2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/clock-divider2.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human-screen.png deleted file mode 100644 index 68eff1a0ebe01e08ef9323a155494dd6cb8fc3a4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human.svg deleted file mode 100644 index 858a061f28186432b51017addf150fbf6a75ec4d..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/conducting-human.svg +++ /dev/null @@ -1,168 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "conducting-human.ps" Page 1 - - - - - A2 - - - - WG - - - - - - main - - - - - A1 - - - - - main - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode-iv-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode-iv-screen.png deleted file mode 100644 index c4ea92fee7064603378df654952e960a0d28affd..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode-iv-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode_iv.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode_iv.svg deleted file mode 100644 index 331643445136d0ac7a24974543662bef6b403fc6..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/diode_iv.svg +++ /dev/null @@ -1,40 +0,0 @@ - - -XCircuit Version 3.7 -File "diode_iv.ps" Page 1 - - - - - - -1K - - - - - - - - - - - - - - - - -PV1 - - -A1 - - -GND - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/driven-pendulum.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/driven-pendulum.svg deleted file mode 100644 index 9e693d5ffd0f1d8d02a8aa316b7e3e5772e00fe7..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/driven-pendulum.svg +++ /dev/null @@ -1,168 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "driven-pendulum.ps" Page 1 - - - - - - - - SQ1 - - - GND - - - - - - - Bobine - - - - Bouton - - - Aimant - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/eyes17-panel.jpg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/eyes17-panel.jpg deleted file mode 100644 index d003a4b61f834fe22efe3fda59995685baad6053..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/eyes17-panel.jpg and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.png deleted file mode 100644 index 335efb2135e6a01a44c852bc3f7dae54af4d6d2c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.svg deleted file mode 100644 index f787651692ebfa494c440051108b47f7bd754140..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/fullwave.svg +++ /dev/null @@ -1,371 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "fullwave.ps" Page 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - WG - - - A1 - - - A3 - - - GND - - - A2 - - - - WG - - - - - - - - - - - R - - charge - - - - C - - filtrage - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.png deleted file mode 100644 index 071b7ed5c0d5c2bb96d1a1fc22bedd3628ebffd6..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.svg deleted file mode 100644 index 354d1c02aa5ec8518b02be023ecb9030d392c02f..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/halfwave.svg +++ /dev/null @@ -1,281 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "halfwave.ps" Page 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - WG - - - A1 - - - A2 - - - GND - - - - C - - filtrage - - - - R - - charge - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ic555-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ic555-screen.png deleted file mode 100644 index a8f137e1d7ececc9c898e729b647f8ba9c1f7c5e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ic555-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction-screen.png deleted file mode 100644 index 7174aea122fb606b31b2c8983b027f979c57f259..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction.svg deleted file mode 100644 index 83b26ed866ae10aaaff085b8589519d44b555b16..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/induction.svg +++ /dev/null @@ -1,174 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "induction.ps" Page 1 - - - - - - - - - - - - Aimant - - - Bobine - - - - - - - A1 - - - GND - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ldr.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ldr.svg deleted file mode 100644 index 0cb64b3dc19c8fda59c5212dc02784416be2c9ca..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/ldr.svg +++ /dev/null @@ -1,218 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "ldr.ps" Page 1 - - - A1 - - - GND - - - - - - - Photorésistance - - - - - - Source de - - - Lumière - - - - - - - - - - - - SEN - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/lemon-cell.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/lemon-cell.svg deleted file mode 100644 index 518f334ef9be85c4728bb3fff9609564e1c17d5c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/lemon-cell.svg +++ /dev/null @@ -1,195 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "lemon-cell.ps" Page 1 - - - - - - - GND - - - A1 - - - - Zn - - - Citron - - - - - - 1 kΩ - - - Cu - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/light-barrier-photo.jpg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/light-barrier-photo.jpg deleted file mode 100644 index 97eb921d83d4c67d1fb4e07c8803a9455c558d72..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/light-barrier-photo.jpg and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/line-pickup.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/line-pickup.svg deleted file mode 100644 index edd2e45fb7f8d6b653c054050636766d6b53a644..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/line-pickup.svg +++ /dev/null @@ -1,232 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "line-pickup.ps" Page 1 - - - A3 - - - - - - - - - - - - - - - - - - - - - - Fil proche d'une ligne - - - mais PAS de connexion - - - électrique, - - - - - Prise - - - de - - - courant - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadEquation.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadEquation.png deleted file mode 100644 index bdeed2b79f8ad6c72761ca0dfb27d13b97c6c78e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadEquation.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadTable.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadTable.png deleted file mode 100644 index 8d0f92e560e4b77b49d55fd25b9a0232a72fda0b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/loadTable.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/logic-gates.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/logic-gates.svg deleted file mode 100644 index 0053a1fe09359f7d07d10d39d5aa0f12416b3685..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/logic-gates.svg +++ /dev/null @@ -1,393 +0,0 @@ - - - - - - image/svg+xml - - - - - - - -XCircuit Version 3.7 -File "logic-gates.ps" Page 1 - - - - - SQ2 - - - SQ1 - - - - - A3 - - - - 5V - - - GND - - - - 7408 - - - 1 - - - 2 - - - 3 - - - 14 - - - 7 - - - - - - - - - - - - - - - - - - - - - A1 - - - A2 - - - - - - - - - - - - 1 - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0017517a0909fa2113c728609ce038ef0ddd8a64.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0017517a0909fa2113c728609ce038ef0ddd8a64.png deleted file mode 100644 index a1583fa2cf9128357222d8b40261ae51b08ed521..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0017517a0909fa2113c728609ce038ef0ddd8a64.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/040a5395dcdf611ae7fed108966b47ee6ab99fa1.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/040a5395dcdf611ae7fed108966b47ee6ab99fa1.png deleted file mode 100644 index e7d65031720a33eca36ce9e84b80dc7dd0ef32f2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/040a5395dcdf611ae7fed108966b47ee6ab99fa1.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/05295d59f466bf7fe8e2b252e4977e92b77c42b7.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/05295d59f466bf7fe8e2b252e4977e92b77c42b7.png deleted file mode 100644 index f01903371bca6c0bad504ea5260b5d77cb413191..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/05295d59f466bf7fe8e2b252e4977e92b77c42b7.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/06685ed182ad883eb62ae69773b4ad8c53a467e6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/06685ed182ad883eb62ae69773b4ad8c53a467e6.png deleted file mode 100644 index 29161ee1db65cd9830bfb964fa0e8e45ff879feb..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/06685ed182ad883eb62ae69773b4ad8c53a467e6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/068f945b4123d53bf3036b093fef79fea4f0f348.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/068f945b4123d53bf3036b093fef79fea4f0f348.png deleted file mode 100644 index 5d0754de10bfa9a8e04697c5c39b90b7c41fbacb..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/068f945b4123d53bf3036b093fef79fea4f0f348.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/097fabb9f7b86d0726fc7fe468c5547439b7e3b6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/097fabb9f7b86d0726fc7fe468c5547439b7e3b6.png deleted file mode 100644 index 86604e6673ea21d3b8f7896cc7efd666e9f95049..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/097fabb9f7b86d0726fc7fe468c5547439b7e3b6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0b7c1e16a3a8a849bb8ffdcdbf86f65fd1f30438.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0b7c1e16a3a8a849bb8ffdcdbf86f65fd1f30438.png deleted file mode 100644 index a18e0a63a658e427bbbbe3b1659e61cf1b68f250..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0b7c1e16a3a8a849bb8ffdcdbf86f65fd1f30438.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0bd5eb9989b969c47903e39dfbf07fe2096bba32.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0bd5eb9989b969c47903e39dfbf07fe2096bba32.png deleted file mode 100644 index fd7e8a5522d5f785f223fc5477375fe105be325e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/0bd5eb9989b969c47903e39dfbf07fe2096bba32.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/117a9280db319af9cc60ec2a6a1c63cc91da4ec1.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/117a9280db319af9cc60ec2a6a1c63cc91da4ec1.png deleted file mode 100644 index 78400b195997c50619b1628d691642e56a977021..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/117a9280db319af9cc60ec2a6a1c63cc91da4ec1.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/118cc182a2b14f51e663d5b5801fd1cba1013101.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/118cc182a2b14f51e663d5b5801fd1cba1013101.png deleted file mode 100644 index fd7e8a5522d5f785f223fc5477375fe105be325e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/118cc182a2b14f51e663d5b5801fd1cba1013101.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/12d1ba9013d1beefc9aac439a55d0784e432f3a6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/12d1ba9013d1beefc9aac439a55d0784e432f3a6.png deleted file mode 100644 index f024521ed24d64d767ca415e51a75b388bc4293d..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/12d1ba9013d1beefc9aac439a55d0784e432f3a6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/13419c81a695554fc8440c9ec12986cced8a0b4c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/13419c81a695554fc8440c9ec12986cced8a0b4c.png deleted file mode 100644 index 7c27f56a96c29644f1e087ef1aaf68f91cc660e5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/13419c81a695554fc8440c9ec12986cced8a0b4c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/169c982b5e649cd1bd6445df5583affe427ea269.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/169c982b5e649cd1bd6445df5583affe427ea269.png deleted file mode 100644 index 53a6bc5188d5a4f807e23bd359bacd3e8602c2cd..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/169c982b5e649cd1bd6445df5583affe427ea269.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/16d14f59441fe3b3d7c57975e6e10cbf2474c220.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/16d14f59441fe3b3d7c57975e6e10cbf2474c220.png deleted file mode 100644 index e57c1583797f943e9121ca990dd673a7207b4ad6..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/16d14f59441fe3b3d7c57975e6e10cbf2474c220.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/18acc1fa0d022fd729f0749ddc5f669917d3fb15.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/18acc1fa0d022fd729f0749ddc5f669917d3fb15.png deleted file mode 100644 index 7c0c702ca9ba748ac7a07bd8c241c7447ba29f46..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/18acc1fa0d022fd729f0749ddc5f669917d3fb15.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/191d8a5b7b9f9387d0005f85c30ab83cba07e726.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/191d8a5b7b9f9387d0005f85c30ab83cba07e726.png deleted file mode 100644 index 4cab5d136a0ad7d1cd9688459a69febd26957430..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/191d8a5b7b9f9387d0005f85c30ab83cba07e726.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1a3570db4544521e511c77e7f1f57c75632c5d52.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1a3570db4544521e511c77e7f1f57c75632c5d52.png deleted file mode 100644 index bb8394ccc7eab740d5cba9f7a6caf4ad46a6023c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1a3570db4544521e511c77e7f1f57c75632c5d52.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1f2504b3b9356a19bca33fe878056102889cf4e9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1f2504b3b9356a19bca33fe878056102889cf4e9.png deleted file mode 100644 index 3986121cffcd0c6d8e0eb7695bb05daeb6547a77..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/1f2504b3b9356a19bca33fe878056102889cf4e9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/227562a91fe2c5700dfa28d683d2e79e520ab153.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/227562a91fe2c5700dfa28d683d2e79e520ab153.png deleted file mode 100644 index 05233f0a1b941b640bb829253b43cb98a6418d0a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/227562a91fe2c5700dfa28d683d2e79e520ab153.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/24f4ab6d4515be48d2743231bd07e0da82252bde.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/24f4ab6d4515be48d2743231bd07e0da82252bde.png deleted file mode 100644 index 5c5d79ab2825cd047e0c82e91c9bd72f9f7c6d93..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/24f4ab6d4515be48d2743231bd07e0da82252bde.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/255444f8beafc92370a22fe3b726ad1c6ad08474.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/255444f8beafc92370a22fe3b726ad1c6ad08474.png deleted file mode 100644 index cc2f5bd3d45fff15588d6f37b101761e8b339c32..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/255444f8beafc92370a22fe3b726ad1c6ad08474.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/27c350f59fabf785d06cf5392a0cf465f09d4822.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/27c350f59fabf785d06cf5392a0cf465f09d4822.png deleted file mode 100644 index b601b00df570011ea771724998d34305edecf4e6..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/27c350f59fabf785d06cf5392a0cf465f09d4822.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/280e8649ccff07c13fba08ce258abc19f3dbf5fb.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/280e8649ccff07c13fba08ce258abc19f3dbf5fb.png deleted file mode 100644 index b3a7edfcdd03b96eea6945f5847d340f5614edf9..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/280e8649ccff07c13fba08ce258abc19f3dbf5fb.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b5568b71acf92c5e95a36e52fd330c6db9861a9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b5568b71acf92c5e95a36e52fd330c6db9861a9.png deleted file mode 100644 index e7d65031720a33eca36ce9e84b80dc7dd0ef32f2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b5568b71acf92c5e95a36e52fd330c6db9861a9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b77700b64b9da91b31580a92c79e18a34f3cb46.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b77700b64b9da91b31580a92c79e18a34f3cb46.png deleted file mode 100644 index e4ac9349f563dfa71127ef3bdc5612b499d46420..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2b77700b64b9da91b31580a92c79e18a34f3cb46.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2df6d73140b918ff471271bf0d299332148bb9b5.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2df6d73140b918ff471271bf0d299332148bb9b5.png deleted file mode 100644 index f25de3bdc736e2faab3fa5a9a9d5599da3f3ece4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/2df6d73140b918ff471271bf0d299332148bb9b5.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/307b3725cbb03398131f9ca542d79aff4933195f.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/307b3725cbb03398131f9ca542d79aff4933195f.png deleted file mode 100644 index 9a02c06c06c32a020b20888150a14c9bcac275fc..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/307b3725cbb03398131f9ca542d79aff4933195f.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/312c50a98cd675d2aee73a4ea811b5c418504b4d.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/312c50a98cd675d2aee73a4ea811b5c418504b4d.png deleted file mode 100644 index 02b591a0e636460ad83e7246c0fc0836bd94617a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/312c50a98cd675d2aee73a4ea811b5c418504b4d.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/31e38a0e1b9c9ec5ab63164d3677a7df90458e56.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/31e38a0e1b9c9ec5ab63164d3677a7df90458e56.png deleted file mode 100644 index 3405ba96a1a5add18b17a30a00da89ef1b4e23f8..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/31e38a0e1b9c9ec5ab63164d3677a7df90458e56.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3270edf84f06fcd268711a855a3f328399202056.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3270edf84f06fcd268711a855a3f328399202056.png deleted file mode 100644 index c0d8bb42b5e625bccdc875858bc2dda35d292fba..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3270edf84f06fcd268711a855a3f328399202056.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/32c6feec0319127b528251271c6dfcd1ba89c729.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/32c6feec0319127b528251271c6dfcd1ba89c729.png deleted file mode 100644 index dc89a0616b0c27e9f3e8b691f5c39d27495f50e1..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/32c6feec0319127b528251271c6dfcd1ba89c729.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/367f724ead30fda4a28e49b089ab80a2592dbfff.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/367f724ead30fda4a28e49b089ab80a2592dbfff.png deleted file mode 100644 index ed05f63a71e63ec1c3d716c89d96fd0ad6e56610..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/367f724ead30fda4a28e49b089ab80a2592dbfff.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/369e726a33a407097256a98b33850484fdaf8f1f.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/369e726a33a407097256a98b33850484fdaf8f1f.png deleted file mode 100644 index 863ee345c2cf85b0fdef51ac35f37953f3360752..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/369e726a33a407097256a98b33850484fdaf8f1f.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/36dfc0dd6f490d35fa65c29d9013ee762dc718f1.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/36dfc0dd6f490d35fa65c29d9013ee762dc718f1.png deleted file mode 100644 index fef1d09705fabdca74d1fd4afd6ea5ca63228522..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/36dfc0dd6f490d35fa65c29d9013ee762dc718f1.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/39d09511d6ffd909e706b64ab124c7c865c0a19c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/39d09511d6ffd909e706b64ab124c7c865c0a19c.png deleted file mode 100644 index e09752464314bd76f189e3a58379034d1e178dc4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/39d09511d6ffd909e706b64ab124c7c865c0a19c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3b7a582390aa358c825f0016c9aca6c33de8c610.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3b7a582390aa358c825f0016c9aca6c33de8c610.png deleted file mode 100644 index 5e2453fe8d42cf31b8fe9540a5132de32eed5396..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3b7a582390aa358c825f0016c9aca6c33de8c610.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3cc5ca2b9feab7f8284dd849160615767efc46de.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3cc5ca2b9feab7f8284dd849160615767efc46de.png deleted file mode 100644 index 794e5f0d5adb50cc7c0fb6d36b4ecff008cba59a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3cc5ca2b9feab7f8284dd849160615767efc46de.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3da4466be0004e4b45ed095632a455e5ab7ccbf9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3da4466be0004e4b45ed095632a455e5ab7ccbf9.png deleted file mode 100644 index bdaee5e20882d7a9cc9ca64c6cca53cfd7e19143..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/3da4466be0004e4b45ed095632a455e5ab7ccbf9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/401c080b7a9144cddf0e5ad48a81afdd82f27712.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/401c080b7a9144cddf0e5ad48a81afdd82f27712.png deleted file mode 100644 index 89c437d8c3d823d9999f50af616d998d166ae3b8..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/401c080b7a9144cddf0e5ad48a81afdd82f27712.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/44ebff0ba36796cd9ee2d865afe267446cd829af.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/44ebff0ba36796cd9ee2d865afe267446cd829af.png deleted file mode 100644 index 5c315940f3b134ff707e42ed2c3c83af8b3fedce..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/44ebff0ba36796cd9ee2d865afe267446cd829af.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/450e4e23bca999c7ef8d807d3d4f3d5f859b4617.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/450e4e23bca999c7ef8d807d3d4f3d5f859b4617.png deleted file mode 100644 index 519773238538df90b2b58db203139b83378008fe..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/450e4e23bca999c7ef8d807d3d4f3d5f859b4617.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/455309425a1c121db3b191eff4f0ea851271a7f6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/455309425a1c121db3b191eff4f0ea851271a7f6.png deleted file mode 100644 index 9b1ff23e62103945ef1e5a0870ef7c4ad3bafb93..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/455309425a1c121db3b191eff4f0ea851271a7f6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46b8bc674cc9e8cb7c5a4be8ebd673b599092808.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46b8bc674cc9e8cb7c5a4be8ebd673b599092808.png deleted file mode 100644 index 0288c84b2ff74dd73c278a3c31357ca769a04e18..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46b8bc674cc9e8cb7c5a4be8ebd673b599092808.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46d0c0b0a1c375061957ed1ee45ec0f79096bca2.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46d0c0b0a1c375061957ed1ee45ec0f79096bca2.png deleted file mode 100644 index 564c596fd7483f19489d43e42dd34d81ea7b2187..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/46d0c0b0a1c375061957ed1ee45ec0f79096bca2.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/47605fcbdf423fdd45a548d0b153ed1572401cac.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/47605fcbdf423fdd45a548d0b153ed1572401cac.png deleted file mode 100644 index 5308ecb976b34a34aaf7595a5c9ab48f9d74d0a4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/47605fcbdf423fdd45a548d0b153ed1572401cac.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/48df4d4a4c82303ecd0057047ce8bf022e984355.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/48df4d4a4c82303ecd0057047ce8bf022e984355.png deleted file mode 100644 index 19b6b2bf71aa98152b7082cf7bee4aaa87c50b7a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/48df4d4a4c82303ecd0057047ce8bf022e984355.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/4fadcf15f169fa7ed69c9507ae179abe1170e6b9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/4fadcf15f169fa7ed69c9507ae179abe1170e6b9.png deleted file mode 100644 index 5e69ca31d7cb612b1b5d9274e6a63738c92784aa..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/4fadcf15f169fa7ed69c9507ae179abe1170e6b9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/50bb9242422c292354b45ce24089737251c21aea.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/50bb9242422c292354b45ce24089737251c21aea.png deleted file mode 100644 index 57f0ff1c8b8567a76f1f52fcc1b70faf2284b0b5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/50bb9242422c292354b45ce24089737251c21aea.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/512ccf9984795afbd18794dc027782b1fadb27e9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/512ccf9984795afbd18794dc027782b1fadb27e9.png deleted file mode 100644 index 8794dc330de2033ebff3719ded6ed6ebd015dbf0..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/512ccf9984795afbd18794dc027782b1fadb27e9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/532f3248d6552e7ac6b785bd935f404ad593e6a9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/532f3248d6552e7ac6b785bd935f404ad593e6a9.png deleted file mode 100644 index 7fac476f11f8c67e0d3025bd5425ceed580d73fc..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/532f3248d6552e7ac6b785bd935f404ad593e6a9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5358376e0641ee3ee5e73d13aad9241890ff4992.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5358376e0641ee3ee5e73d13aad9241890ff4992.png deleted file mode 100644 index 4ed4c65567cfdfd0c75dd1096c5c1d133e21ba2d..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5358376e0641ee3ee5e73d13aad9241890ff4992.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/53a20f2a00696f557838673af1af95b5c27bee90.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/53a20f2a00696f557838673af1af95b5c27bee90.png deleted file mode 100644 index e6f559d82deca4c597996d14d7f501a41ef22d24..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/53a20f2a00696f557838673af1af95b5c27bee90.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/54a815519c6177c8991caf5a1edc5d02967f799b.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/54a815519c6177c8991caf5a1edc5d02967f799b.png deleted file mode 100644 index bdba751b1fae160d513bf19d981519670bbbb9c2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/54a815519c6177c8991caf5a1edc5d02967f799b.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5b710c6ba84e84c8a17030c5217102ae168d1e02.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5b710c6ba84e84c8a17030c5217102ae168d1e02.png deleted file mode 100644 index 84de3c572db4e169a817797d10a53641b45ac5f5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5b710c6ba84e84c8a17030c5217102ae168d1e02.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5c5a18bdc063ef476af83f210dd4bcfe69d8fff8.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5c5a18bdc063ef476af83f210dd4bcfe69d8fff8.png deleted file mode 100644 index b30d2672762595830032c02d096a457726effb02..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5c5a18bdc063ef476af83f210dd4bcfe69d8fff8.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5df22fb60995160195c21d25e527e9cd6bb6e224.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5df22fb60995160195c21d25e527e9cd6bb6e224.png deleted file mode 100644 index 276f8840a3b48ff1cd8ba225b4a3941d64474c25..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5df22fb60995160195c21d25e527e9cd6bb6e224.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5fa6dae3139f4001dba49ec211de3e9053548dec.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5fa6dae3139f4001dba49ec211de3e9053548dec.png deleted file mode 100644 index 569ab0c86e1c70676845a3186f9bcfdb1e3bb093..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/5fa6dae3139f4001dba49ec211de3e9053548dec.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/60a5f57cb425f62765c576e48ba2fc4c6a528fc8.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/60a5f57cb425f62765c576e48ba2fc4c6a528fc8.png deleted file mode 100644 index 7e901bc3e41e903995356ac12f7f1288abd27b87..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/60a5f57cb425f62765c576e48ba2fc4c6a528fc8.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/614f03160a972cd6580c2ba31802bd61e72d1c35.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/614f03160a972cd6580c2ba31802bd61e72d1c35.png deleted file mode 100644 index 1a10c2bf823ee8fb56ffd1d647debe709dc69c38..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/614f03160a972cd6580c2ba31802bd61e72d1c35.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/620a3ce6403ec82f1347af9985bc03f7a9382f4a.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/620a3ce6403ec82f1347af9985bc03f7a9382f4a.png deleted file mode 100644 index 5e461849a74b83a65a350c94167ca1a29e31474e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/620a3ce6403ec82f1347af9985bc03f7a9382f4a.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/64f8687bfd678e99fcc62e8cbdefcc0b004ec5df.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/64f8687bfd678e99fcc62e8cbdefcc0b004ec5df.png deleted file mode 100644 index 91d8f34d1b4ddb8c795511081ebe7155280014e4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/64f8687bfd678e99fcc62e8cbdefcc0b004ec5df.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67763ee8e4752b3b94c82605090336c07af1d3d5.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67763ee8e4752b3b94c82605090336c07af1d3d5.png deleted file mode 100644 index 6299b3550d4b920960ecab8ac36566562f1d45e4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67763ee8e4752b3b94c82605090336c07af1d3d5.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67878c991bc01fe63fea24670915286f5daa006c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67878c991bc01fe63fea24670915286f5daa006c.png deleted file mode 100644 index e47d63c85af068a9e932d6ad6bbf2fee474ad85c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/67878c991bc01fe63fea24670915286f5daa006c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/6fe46a7af303c50b92950b0f351a9cd553195d2b.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/6fe46a7af303c50b92950b0f351a9cd553195d2b.png deleted file mode 100644 index e3580aa549854aa803767bde4e785cf6f9fba188..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/6fe46a7af303c50b92950b0f351a9cd553195d2b.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/71e0510df4df44cfb1644b4503bf0c84a2326101.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/71e0510df4df44cfb1644b4503bf0c84a2326101.png deleted file mode 100644 index b3e1542c784493107cefa6370f12782cb85f024f..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/71e0510df4df44cfb1644b4503bf0c84a2326101.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/727042c5547738459bc946466cbf1815408b97e2.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/727042c5547738459bc946466cbf1815408b97e2.png deleted file mode 100644 index 082dafd3887be9cbbcaad764a125fcf8a88e0103..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/727042c5547738459bc946466cbf1815408b97e2.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/747baa849ddf46b5a4d2e10666b6ae1c7a95ee05.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/747baa849ddf46b5a4d2e10666b6ae1c7a95ee05.png deleted file mode 100644 index 2092d7fa45a45da6f156cd2491b8950c118de6f4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/747baa849ddf46b5a4d2e10666b6ae1c7a95ee05.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/76f1d8ace30435987c01a00ca53a71cba1f40e6c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/76f1d8ace30435987c01a00ca53a71cba1f40e6c.png deleted file mode 100644 index cfb47f4bc4d7219c432e0fb70fc4ab5bbf04999c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/76f1d8ace30435987c01a00ca53a71cba1f40e6c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/784456a8c31411ca3eff7e37f5e975650d0a431b.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/784456a8c31411ca3eff7e37f5e975650d0a431b.png deleted file mode 100644 index 4b9391fbaf180af2848728712a48435811d831d7..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/784456a8c31411ca3eff7e37f5e975650d0a431b.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/78a06cf7a34f39fde71fbba0d5539baae7c72d4e.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/78a06cf7a34f39fde71fbba0d5539baae7c72d4e.png deleted file mode 100644 index 48feabc1aa9c9e3da76d690cba7e24f5b8d3d220..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/78a06cf7a34f39fde71fbba0d5539baae7c72d4e.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/7d26a58f053a6006d66fbdf8066d0cedad85a45e.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/7d26a58f053a6006d66fbdf8066d0cedad85a45e.png deleted file mode 100644 index c095171dc69780f4588506d3d925c11cc1ed9a16..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/7d26a58f053a6006d66fbdf8066d0cedad85a45e.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/82162ef1e74838867e821869332f61839d9eae14.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/82162ef1e74838867e821869332f61839d9eae14.png deleted file mode 100644 index 9bb1efd02a2c41292718a23fbd2eef9b6ac1e46f..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/82162ef1e74838867e821869332f61839d9eae14.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/83b243116fc4ea50c8c083f6da6696cdf9d7d82d.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/83b243116fc4ea50c8c083f6da6696cdf9d7d82d.png deleted file mode 100644 index bf91d9074d0ad164a7fd8eddd20bb9772334e99e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/83b243116fc4ea50c8c083f6da6696cdf9d7d82d.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/855050f8e6ce09f0c2716ded698e80a83b3436b3.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/855050f8e6ce09f0c2716ded698e80a83b3436b3.png deleted file mode 100644 index c2d88d16790f3a1c8c02ac94aad7594fdc26c1e3..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/855050f8e6ce09f0c2716ded698e80a83b3436b3.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/895c735dd3781af6274b7720aeac12c325bb8f32.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/895c735dd3781af6274b7720aeac12c325bb8f32.png deleted file mode 100644 index 0aca96e89433ea7d95b2fa8d9020afb61e6273bd..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/895c735dd3781af6274b7720aeac12c325bb8f32.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8a2c67f0b57480979c11c04b19d373619aadc6c5.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8a2c67f0b57480979c11c04b19d373619aadc6c5.png deleted file mode 100644 index 5b7e650c22dbc6820c4dcce7414de8f91962d443..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8a2c67f0b57480979c11c04b19d373619aadc6c5.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8b012ca7c938d1fd6615b4c5cbc027507d0e446c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8b012ca7c938d1fd6615b4c5cbc027507d0e446c.png deleted file mode 100644 index e015ba26d0be473e665fc1a68449a29ff4914b99..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8b012ca7c938d1fd6615b4c5cbc027507d0e446c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8cdaff7d632a472fa21532774e5176f13a64dc37.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8cdaff7d632a472fa21532774e5176f13a64dc37.png deleted file mode 100644 index 783b43c037b49c4f1501090243dadef323efcbfe..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8cdaff7d632a472fa21532774e5176f13a64dc37.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8eec40346746e3d6c580ca504fbd9e889d852ba9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8eec40346746e3d6c580ca504fbd9e889d852ba9.png deleted file mode 100644 index 20f2c19949aff8411f1392b463ac90b74d224ae5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8eec40346746e3d6c580ca504fbd9e889d852ba9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8f7e1f73995959fe74248d103c2cf3e7eb4fff40.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8f7e1f73995959fe74248d103c2cf3e7eb4fff40.png deleted file mode 100644 index 79baf7c95631ac314dfd9f707c9a113d05013f34..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/8f7e1f73995959fe74248d103c2cf3e7eb4fff40.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/915fd7cd68c421452813aebcc3d1c277c26ff6f7.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/915fd7cd68c421452813aebcc3d1c277c26ff6f7.png deleted file mode 100644 index 9aedec90a7f0e79dd372c4a202cf9e387a207dee..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/915fd7cd68c421452813aebcc3d1c277c26ff6f7.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9210342930929ea814930262304b16d0c79a28ad.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9210342930929ea814930262304b16d0c79a28ad.png deleted file mode 100644 index 54111d1e8acfe53de7500bcb1cb2961a0b424c91..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9210342930929ea814930262304b16d0c79a28ad.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95120124b896391b19e0eaacd032c3454e49fb0f.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95120124b896391b19e0eaacd032c3454e49fb0f.png deleted file mode 100644 index e23b920f1c34a0619dfac0156d460f33f1ad33e1..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95120124b896391b19e0eaacd032c3454e49fb0f.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95ffa5ca56043a667a808c584d8dccb98bd552c6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95ffa5ca56043a667a808c584d8dccb98bd552c6.png deleted file mode 100644 index d53d759133eeb7bfdd674b0c9c4a3881e9deaefa..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/95ffa5ca56043a667a808c584d8dccb98bd552c6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/97437227c84e9a1b49907bf4e4aeb89f0d63e737.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/97437227c84e9a1b49907bf4e4aeb89f0d63e737.png deleted file mode 100644 index 9c1aefd62a0cc55437a20c4d40ede44462f617a6..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/97437227c84e9a1b49907bf4e4aeb89f0d63e737.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/980e85ae6f65381d828acd36825fa84852ff1a96.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/980e85ae6f65381d828acd36825fa84852ff1a96.png deleted file mode 100644 index 4b9a0a6cdcbbd7e3875c75830566ca15d091a939..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/980e85ae6f65381d828acd36825fa84852ff1a96.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9b0fd5debc52dcb41d25a9b4c3cb380c6179b12f.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9b0fd5debc52dcb41d25a9b4c3cb380c6179b12f.png deleted file mode 100644 index 0648bc0e65c693047e0a48b53725dd68dfc7a333..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9b0fd5debc52dcb41d25a9b4c3cb380c6179b12f.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9da16e77911c3af831d1804697d2258399d34781.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9da16e77911c3af831d1804697d2258399d34781.png deleted file mode 100644 index 87bb3ac2a4d956a2b90cc87939830f681ae814da..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9da16e77911c3af831d1804697d2258399d34781.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9f56540eb0da866353f38e2d23a05783810103f3.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9f56540eb0da866353f38e2d23a05783810103f3.png deleted file mode 100644 index c4d0a8260c672c13f5b8448bda980e884243d4b4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/9f56540eb0da866353f38e2d23a05783810103f3.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/a129681a2164895f179b5dad647243f7b4151c92.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/a129681a2164895f179b5dad647243f7b4151c92.png deleted file mode 100644 index 2c4dda5191faaf2f03647d74647368a897ac56ad..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/a129681a2164895f179b5dad647243f7b4151c92.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/aaed9c7398830cf9e550e4bdc5227f509019655f.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/aaed9c7398830cf9e550e4bdc5227f509019655f.png deleted file mode 100644 index 83988703d22054f8be86e00633bfa84c6ab76914..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/aaed9c7398830cf9e550e4bdc5227f509019655f.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ac4e20e69c37eff30edc1ed3d9f2a165574e1fca.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ac4e20e69c37eff30edc1ed3d9f2a165574e1fca.png deleted file mode 100644 index 40856f9c38bf1acb8fef32d965706af25c28f1a3..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ac4e20e69c37eff30edc1ed3d9f2a165574e1fca.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ae12a24f88803b5895632e4848d87d46483c492c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ae12a24f88803b5895632e4848d87d46483c492c.png deleted file mode 100644 index 429ac723c0b842466d2b3bb40d73a7bf4c18a03b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ae12a24f88803b5895632e4848d87d46483c492c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b05927222a41f6c8ad2f56c0f804dbf4408e5eca.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b05927222a41f6c8ad2f56c0f804dbf4408e5eca.png deleted file mode 100644 index bb9e7b59b7c580420d810a9b43a082466eb604a2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b05927222a41f6c8ad2f56c0f804dbf4408e5eca.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b163e19d6fdfb9ba198369e1de79999a184e1950.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b163e19d6fdfb9ba198369e1de79999a184e1950.png deleted file mode 100644 index 5f7a316f08ba69ee04afec83d7da5d7899f745de..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b163e19d6fdfb9ba198369e1de79999a184e1950.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b1a48943c2c92e1fda4acc96b15e087f23130e3b.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b1a48943c2c92e1fda4acc96b15e087f23130e3b.png deleted file mode 100644 index c68ec1115466338c5be65a5be642626cc37aac52..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b1a48943c2c92e1fda4acc96b15e087f23130e3b.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b359488b993294ebbc2c7b30ab8f749dcbc6826d.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b359488b993294ebbc2c7b30ab8f749dcbc6826d.png deleted file mode 100644 index 78361c8ff1ce441b98bc68f9f2bf395c3bfd7855..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b359488b993294ebbc2c7b30ab8f749dcbc6826d.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3a947d322e5f6be310e967d44df7fe38904a979.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3a947d322e5f6be310e967d44df7fe38904a979.png deleted file mode 100644 index 18a0a76d6d7f9a86887220076bb67f6f9c6c4148..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3a947d322e5f6be310e967d44df7fe38904a979.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3e216320b7c8be2cbc21be0d6b5b7902b40e30c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3e216320b7c8be2cbc21be0d6b5b7902b40e30c.png deleted file mode 100644 index 78400b195997c50619b1628d691642e56a977021..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b3e216320b7c8be2cbc21be0d6b5b7902b40e30c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5489d27c0163a0b1273d1b7ab91eb679805b6cf.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5489d27c0163a0b1273d1b7ab91eb679805b6cf.png deleted file mode 100644 index 085ce12e6f5e9f7a72d56f912ea81e96758decda..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5489d27c0163a0b1273d1b7ab91eb679805b6cf.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5d4e174ea86a52e786342b24673c46c8abbd387.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5d4e174ea86a52e786342b24673c46c8abbd387.png deleted file mode 100644 index ded3c671422968d7dce86302bb02b809282ee4de..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/b5d4e174ea86a52e786342b24673c46c8abbd387.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd29ee783d86f95c9d807faec95a1e5f25a15367.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd29ee783d86f95c9d807faec95a1e5f25a15367.png deleted file mode 100644 index 67833cdb6a98239db8b3b0e79a6436778198ffba..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd29ee783d86f95c9d807faec95a1e5f25a15367.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd74ebf2bdb0b97a186886bae79a6000148b8195.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd74ebf2bdb0b97a186886bae79a6000148b8195.png deleted file mode 100644 index 9a7febd3fcada152e24c7f9273e8237d4fe3545b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bd74ebf2bdb0b97a186886bae79a6000148b8195.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bdd9c17025e88b5613f699c22ece47ac2849070e.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bdd9c17025e88b5613f699c22ece47ac2849070e.png deleted file mode 100644 index b09be8280a0c2238c61d63c96de412793039fe48..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bdd9c17025e88b5613f699c22ece47ac2849070e.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bea218d9bbc22ce38a492e2b63103a87f143f1a7.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bea218d9bbc22ce38a492e2b63103a87f143f1a7.png deleted file mode 100644 index 77b3d6c9cc10c0d97564830f31cc26b4d125c54c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/bea218d9bbc22ce38a492e2b63103a87f143f1a7.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c775188f4c995141fc7ee6f0336595dc12d2c761.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c775188f4c995141fc7ee6f0336595dc12d2c761.png deleted file mode 100644 index e325cae809c4ab56141322b252607bc609f9a271..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c775188f4c995141fc7ee6f0336595dc12d2c761.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c869bead85121f53b9909b1c317716d79cc49146.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c869bead85121f53b9909b1c317716d79cc49146.png deleted file mode 100644 index 44d72d063755b31e9dc6a1fd8564504dc9bc9e9a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c869bead85121f53b9909b1c317716d79cc49146.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c881340f4a0fff8f9e62b5ed86ad9d3eeff919f7.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c881340f4a0fff8f9e62b5ed86ad9d3eeff919f7.png deleted file mode 100644 index 57f0ff1c8b8567a76f1f52fcc1b70faf2284b0b5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c881340f4a0fff8f9e62b5ed86ad9d3eeff919f7.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c9f7f549490149dcb80a9dd0129bf52ff079accc.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c9f7f549490149dcb80a9dd0129bf52ff079accc.png deleted file mode 100644 index 316e8615f0d3e7785acb8c0284b3328795a8d193..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/c9f7f549490149dcb80a9dd0129bf52ff079accc.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ca36dbc6d5158cb79f5591a51c67f087043c8c29.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ca36dbc6d5158cb79f5591a51c67f087043c8c29.png deleted file mode 100644 index 5057f5d202ae4253fa616ac1fa3d8d2e9affadcd..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ca36dbc6d5158cb79f5591a51c67f087043c8c29.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cb5b37a5c7554c8d40382767410bb1e280407b75.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cb5b37a5c7554c8d40382767410bb1e280407b75.png deleted file mode 100644 index 9c0b45b43d4db07e59936889d397d608fb9b6bb8..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cb5b37a5c7554c8d40382767410bb1e280407b75.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cdb1157e4d667f56a60f2e4950e769a7622f773c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cdb1157e4d667f56a60f2e4950e769a7622f773c.png deleted file mode 100644 index 7265c967b6f150b3183d6b7ce977b394a52e7c6b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/cdb1157e4d667f56a60f2e4950e769a7622f773c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d09cee760dc43b03cbf1e345e22363826a4eda80.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d09cee760dc43b03cbf1e345e22363826a4eda80.png deleted file mode 100644 index f69ad001a8650cb910750db28c34eda2216d8781..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d09cee760dc43b03cbf1e345e22363826a4eda80.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d5861bf84832a2930266db81cdf58c7b36074961.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d5861bf84832a2930266db81cdf58c7b36074961.png deleted file mode 100644 index 1333aa677477704d0461c0c98762bb243cfb4b34..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d5861bf84832a2930266db81cdf58c7b36074961.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76ab808f15e0e219ae4d5601d92a92ae0fec084.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76ab808f15e0e219ae4d5601d92a92ae0fec084.png deleted file mode 100644 index cf00ebd96755c03492c2195048964119efa03210..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76ab808f15e0e219ae4d5601d92a92ae0fec084.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76d759730f2c5ae0d1b8d56a8fa13f7512f349d.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76d759730f2c5ae0d1b8d56a8fa13f7512f349d.png deleted file mode 100644 index da897608bb02a53a038fdbfa4e19bf4e03927207..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d76d759730f2c5ae0d1b8d56a8fa13f7512f349d.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d88860a7696731c22c4a53793ac1f4c64a3e0bc6.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d88860a7696731c22c4a53793ac1f4c64a3e0bc6.png deleted file mode 100644 index 93691c9d0500d5bc5fde6de61b8ddaf1c4ecb66e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d88860a7696731c22c4a53793ac1f4c64a3e0bc6.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d89a64758d669e39598fce286e5d378515f6f97c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d89a64758d669e39598fce286e5d378515f6f97c.png deleted file mode 100644 index 880df46e07b79e521766b99d9a9b913cd5a2026f..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/d89a64758d669e39598fce286e5d378515f6f97c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/deceeaf1a45dc57b379bd2d8de5850cf3f6a9470.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/deceeaf1a45dc57b379bd2d8de5850cf3f6a9470.png deleted file mode 100644 index 078aae89110ec87e5f8374909651873a73f636d7..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/deceeaf1a45dc57b379bd2d8de5850cf3f6a9470.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/def704035f18cc44643a5bf64441776f350438a0.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/def704035f18cc44643a5bf64441776f350438a0.png deleted file mode 100644 index c75ab87294ac7190e2eca433162f7c5c30fff074..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/def704035f18cc44643a5bf64441776f350438a0.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e11f2701c4a39c7fe543a6c4150b421d50f1c159.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e11f2701c4a39c7fe543a6c4150b421d50f1c159.png deleted file mode 100644 index 991b8ed2704afdd0b5a74e0b6d221f734ff71af4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e11f2701c4a39c7fe543a6c4150b421d50f1c159.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e4281700954f885e36666aa922f0f2f382dc0b73.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e4281700954f885e36666aa922f0f2f382dc0b73.png deleted file mode 100644 index d64dec66429740e7c4ba753b989314095b128ea5..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e4281700954f885e36666aa922f0f2f382dc0b73.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e551c6789e790440f5ccc2020aacadaa6c8fc7d4.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e551c6789e790440f5ccc2020aacadaa6c8fc7d4.png deleted file mode 100644 index 0d0686820c391ecafe88013f5f63c6083962c6a3..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e551c6789e790440f5ccc2020aacadaa6c8fc7d4.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e592f89aa9852535fc5389fb882893b41800078c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e592f89aa9852535fc5389fb882893b41800078c.png deleted file mode 100644 index 5459f6ffef0698ffec045b859160e8c913761f10..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e592f89aa9852535fc5389fb882893b41800078c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e875fe84f3a05092166fd86c322d059029f8bd83.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e875fe84f3a05092166fd86c322d059029f8bd83.png deleted file mode 100644 index 589c01f3cd7bb0bff0479d71ec36b0cd1c74ed91..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e875fe84f3a05092166fd86c322d059029f8bd83.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e946e1280d32b04f12e80a6895ab7ec16b024585.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e946e1280d32b04f12e80a6895ab7ec16b024585.png deleted file mode 100644 index 6dbb3ac653536185dc4b2c2bbc0b6bd1b1d2cd64..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/e946e1280d32b04f12e80a6895ab7ec16b024585.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ea6f6f13b9f5b09ee6f4887642cd59215a15fc2d.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ea6f6f13b9f5b09ee6f4887642cd59215a15fc2d.png deleted file mode 100644 index 2c23999d4b1e3455cbad2b83bc27a622ac514b4c..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ea6f6f13b9f5b09ee6f4887642cd59215a15fc2d.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ed77bde1a0989f9797868b93eb46ad1ec2a866ae.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ed77bde1a0989f9797868b93eb46ad1ec2a866ae.png deleted file mode 100644 index 87abcb9e24660e3ce123327e56d91d7113823ad4..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/ed77bde1a0989f9797868b93eb46ad1ec2a866ae.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f23ac950c94d19d1f7cf10fd58be02d8447bcaee.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f23ac950c94d19d1f7cf10fd58be02d8447bcaee.png deleted file mode 100644 index f260ce6b936eb2165646658e2c9b7c919d5cca5a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f23ac950c94d19d1f7cf10fd58be02d8447bcaee.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f259596ec478838a19c37c38f45cfc3602ca4791.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f259596ec478838a19c37c38f45cfc3602ca4791.png deleted file mode 100644 index ab11b1ef65fbeea61c4100a7b7ee71ab06e644df..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f259596ec478838a19c37c38f45cfc3602ca4791.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f2d283a2071f9d043c9e0b0f794a8880fa0d3ce9.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f2d283a2071f9d043c9e0b0f794a8880fa0d3ce9.png deleted file mode 100644 index d6620a14e7c0013fd079572a6d83413e412fe17a..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f2d283a2071f9d043c9e0b0f794a8880fa0d3ce9.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f3dc0e5a2b3efa80465d44cdcf6b88714ca8b0be.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f3dc0e5a2b3efa80465d44cdcf6b88714ca8b0be.png deleted file mode 100644 index 0cc2cdbc6c2971293a166d8443f4a59dedced984..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f3dc0e5a2b3efa80465d44cdcf6b88714ca8b0be.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f567e0a9af74f077f8f58295d60a30e7d14dc776.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f567e0a9af74f077f8f58295d60a30e7d14dc776.png deleted file mode 100644 index 020086fbabbbd1c8555db2a831909a79ea944687..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f567e0a9af74f077f8f58295d60a30e7d14dc776.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f6d5026afb39d7a3006495b38e318ef31a5e56be.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f6d5026afb39d7a3006495b38e318ef31a5e56be.png deleted file mode 100644 index 1c6e6ff7a8679a05ca5b0a34930f8aba55d650d1..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/f6d5026afb39d7a3006495b38e318ef31a5e56be.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fa7c31e0f5de02e1d335ca390907a3c6b583549c.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fa7c31e0f5de02e1d335ca390907a3c6b583549c.png deleted file mode 100644 index 45d2634317546f2f58db238b8b6353c14e924456..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fa7c31e0f5de02e1d335ca390907a3c6b583549c.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fdfa6216fdf0e24c028b65c6e6c4cd7a99258dc7.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fdfa6216fdf0e24c028b65c6e6c4cd7a99258dc7.png deleted file mode 100644 index 71bbec7ca18f9c864c928388fe2b0cc93c42f649..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fdfa6216fdf0e24c028b65c6e6c4cd7a99258dc7.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fede4649a130b0403092403f4cc5b793ba204ceb.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fede4649a130b0403092403f4cc5b793ba204ceb.png deleted file mode 100644 index 63413ef3b9bec0f3a6780c533a33199850080826..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/math/fede4649a130b0403092403f4cc5b793ba204ceb.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/measure-dc.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/measure-dc.svg deleted file mode 100644 index 362f9eed2864e56fb59c7271cf471f2f86f63012..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/measure-dc.svg +++ /dev/null @@ -1,129 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "measure-dc.ps" Page 1 - - - - GND - - - A1 - - - - - - - - Pile - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-int.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-int.svg deleted file mode 100644 index 8891f18cc709708a58051c5d0612a6e2ad99a194..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-int.svg +++ /dev/null @@ -1,435 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "opamp-int.ps" Page 1 - - - - - - - + - - - - - - - - - - - - - - - - - WG - - - - - A1 - - - - A2 - - - - - - GND - - - 10 kΩ - - - 1 kΩ - - - +V - - - -V - - - 2 - - - 3 - - - 6 - - - 7 - - - 4 - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-inv.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-inv.svg deleted file mode 100644 index 1b5fe54e2ad90610e8d0e30e0578f361f4d19a5f..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-inv.svg +++ /dev/null @@ -1,409 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "opamp-inv.ps" Page 1 - - - - - - - + - - - - - - - - - - - - - - - - - WG - - - - - A1 - - - - A2 - - - - - - GND - - - 10 kΩ - - - 1 kΩ - - - +V - - - -V - - - 2 - - - 3 - - - 6 - - - 7 - - - 4 - - - - - - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-noninv.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-noninv.svg deleted file mode 100644 index 0fd3615edcf3c34d6fe0cea07f3359805f68acaa..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opamp-noninv.svg +++ /dev/null @@ -1,404 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "opamp-noninv.ps" Page 1 - - - - - - - + - - - - - - - - - - - - - - - - - WG - - - - - A1 - - - - A2 - - - - - - GND - - - 10 kΩ - - - 1 kΩ - - - +V - - - -V - - - 2 - - - 3 - - - 6 - - - 7 - - - 4 - - - - - - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric-transmission.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric-transmission.png deleted file mode 100644 index f87f781dacff9bcd8e4371fea67e36f32b123916..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric-transmission.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric.svg deleted file mode 100644 index 2bc6e0c64ec4487a09cc717c7fc84b3c8da8e7e2..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/opto-electric.svg +++ /dev/null @@ -1,301 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "opto-electric.ps" Page 1 - - - SQ1 - - - GND - - - SEN - - - - - - - - - - - - - - - - - - DEL - - - - - - - - Photo - - - transistor - - - - - - - A1 - - - A2 - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/osc555.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/osc555.svg deleted file mode 100644 index d077c20494ccf8e32a48658bbcd3375f26ce1edf..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/osc555.svg +++ /dev/null @@ -1,487 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "osc555.ps" Page 1 - - - - - - - 8 - - - 4 - - - 7 - - - 6 - - - 2 - - - 3 - - - 5 - - - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IC555 - - - - - - 5V - - - - - - - - - A1 - - - IN2 - - - - - - GND - - - A2 - - - 0,1 µF - - - 1 µF - - - - - - 10 kΩ - - - 10 kΩ - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pendulum-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pendulum-screen.png deleted file mode 100644 index 3666edbe4ae2d8e2ecfe84fe9980c3fa6a75ccd2..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pendulum-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pickup.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pickup.png deleted file mode 100644 index d2305b1f3c58870664f23b533e2445d3b55f4f15..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pickup.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/piezo-freq-resp.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/piezo-freq-resp.png deleted file mode 100644 index b3bc86c4a8f5334f1f3920ce6af7bda8b0f60aa7..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/piezo-freq-resp.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100-screen.png deleted file mode 100644 index 213edc592961816d9e11f0db0be2503239fc7f94..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100.svg deleted file mode 100644 index 21251aa43ba42f2996cbb375cff1ed9dc576eb6c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/pt100.svg +++ /dev/null @@ -1,198 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "pt100.ps" Page 1 - - - PT100 - - - - Rg - - - A3 - - - CCS - - - GND - - - - - - - - - - - - - - 1 kΩ - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-body.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-body.svg deleted file mode 100644 index 6d2e48785f9a0e1dcb5d6a3106be551fbdc7b65a..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-body.svg +++ /dev/null @@ -1,215 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "res-body.ps" Page 1 - - - A1 - - - A2 - - - GND - - - - - - - - - - 100 kΩ - - - PV1 - - - - - - - - main - - - - - - main - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-compare.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-compare.svg deleted file mode 100644 index 0d6d2158b42324cd5c2cb21f44a998f7ed92278b..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-compare.svg +++ /dev/null @@ -1,42 +0,0 @@ - - -XCircuit Version 3.7 -File "res-compare.ps" Page 1 - - - -A1 - - -PV1 - - -GND - - - - - - - - - - - -R1 - - -R2 - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-measure.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-measure.svg deleted file mode 100644 index 107c1895d4a655fa778350f6aa54a20e7c35c76c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-measure.svg +++ /dev/null @@ -1,30 +0,0 @@ - - -XCircuit Version 3.7 -File "res-measure.ps" Page 1 - - - -SEN - - -GND - - - - - - - -R - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-parallel.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-parallel.svg deleted file mode 100644 index 0d6badbd1f376a4217522e7f69180919f792cfb2..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-parallel.svg +++ /dev/null @@ -1,38 +0,0 @@ - - -XCircuit Version 3.7 -File "res-parallel.ps" Page 1 - - - -SEN - - -GND - - - - - - - -R1 - - - - - - - - -R2 - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-series.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-series.svg deleted file mode 100644 index d0a10e10d5c0c6c85e63324469fc9d5e4710572e..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-series.svg +++ /dev/null @@ -1,36 +0,0 @@ - - -XCircuit Version 3.7 -File "res-series.ps" Page 1 - - - -SEN - - -GND - - - - - - - -R1 - - - - - - - - -R2 - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-water.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-water.svg deleted file mode 100644 index 71623b8530d1543c6dc869887c90ad60ef38771c..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/res-water.svg +++ /dev/null @@ -1,223 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "res-water.ps" Page 1 - - - Eau - - - - - WG - - - - - A2 - - - - - - - - R - - - R1 - - - A1 - - - - - - GND - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/resonance-pendulum.jpg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/resonance-pendulum.jpg deleted file mode 100644 index 5986604eadcded471ab981dd01139401655bf214..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/resonance-pendulum.jpg and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/rod-pendulum.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/rod-pendulum.svg deleted file mode 100644 index 514883fb35b15dedbb572041bdd0c414dd56d0b1..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/rod-pendulum.svg +++ /dev/null @@ -1,280 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "rod-pendulum.ps" Page 1 - - - SQ1 - - - GND - - - SEN - - - - - - - - - - - - - - - - - - DEL - - - - - - - - - Photo - - - transistor - - - - - - - - - Pendule - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-inputs.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-inputs.png deleted file mode 100644 index 3869ef42301b6eb08573598e2cb50897b670ca73..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-inputs.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-outputs.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-outputs.png deleted file mode 100644 index 3521edad2b6d2b58cff57a293e99c6eca4c80f47..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope-outputs.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope17.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope17.png deleted file mode 100644 index e2d2b99ed17226083108f8ba325566dda06d3f3f..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/scope17.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sine.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sine.png deleted file mode 100644 index 3364f78b6836afa8aae8fb7cf404ecb308dd8a43..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sine.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sinewaveFFT.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sinewaveFFT.png deleted file mode 100644 index a7bc73245f4079156705249429f191556c9cf9c6..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sinewaveFFT.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-beats.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-beats.svg deleted file mode 100644 index 6cf6df6be99105dc7ae9179343ecd8768b1a6076..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-beats.svg +++ /dev/null @@ -1,223 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "sound-beats.ps" Page 1 - - - WG - - - GND - - - Piézo1 - - - SQ1 - - - Piézo2 - - - - - MIC - - - - GND - - - - - Microphone - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-capture.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-capture.svg deleted file mode 100644 index ee04591fb37f49d72ebcaa81c21ad72432792411..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-capture.svg +++ /dev/null @@ -1,163 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "sound-capture.ps" Page 1 - - - GND - - - - - MIC - - - Mic - - - - - - - Source sonore - - - Sifflet, buzzer, etc. - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-generator.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-generator.svg deleted file mode 100644 index 4db20c421571cd4f4a50312e3e652dc24ed7e4e0..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-generator.svg +++ /dev/null @@ -1,137 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "sound-generator.ps" Page 1 - - - WG - - - GND - - - - - - - Piézo - - - Disque - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-velocity.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-velocity.svg deleted file mode 100644 index 93963551108883c9b23ebc72698d26de8b99d965..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound-velocity.svg +++ /dev/null @@ -1,221 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "sound-velocity.ps" Page 1 - - - WG - - - GND - - - MIC - - - - - - - - - - - GND - - - - Microphone - - - - - - - A1 - - - - Buzzer - - - Piézo - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound_waves.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound_waves.png deleted file mode 100644 index 64d142bd9d596fbb5692ff27d50ce5ad09af7800..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sound_waves.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqr-wave.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqr-wave.png deleted file mode 100644 index 99712f280b8f06ebf60f8b5f76a6c7dd8657067e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqr-wave.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqwaveFFT.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqwaveFFT.png deleted file mode 100644 index dda98639b042732cde5978debf3d5ba3079e1112..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sqwaveFFT.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sr04-dist.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sr04-dist.svg deleted file mode 100644 index d91b99a6c31147be93451f705b3f0aa7d7b6c6ab..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/sr04-dist.svg +++ /dev/null @@ -1,52 +0,0 @@ - - -XCircuit Version 3.7 -File "sr04-dist.ps" Page 1 - - - - -HY-SR04 - - -+5V - - -GND - - -TRIG - - -ECHO - - -5V - - -GND - - - - - -SQ2 - - - -IN2 - - - - - - - - - - - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/stroboscope.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/stroboscope.svg deleted file mode 100644 index 18e50d4e0997c15cbf2b1bf2f1904f49d0762603..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/stroboscope.svg +++ /dev/null @@ -1,195 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "stroboscope.ps" Page 1 - - - SQ1 - - - - - - - GND - - - - - - - - - - - - - Moteur - - - Disque - - - - DEL - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer-screen.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer-screen.png deleted file mode 100644 index 9588d37f1fc89581eb0726f1caa44b207708f660..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer-screen.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer.svg deleted file mode 100644 index fcd8dc83625676665cf49f5a20faa117a5ff00cb..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transformer.svg +++ /dev/null @@ -1,304 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "transformer.ps" Page 1 - - - WG - - - - - - A1 - - - - - - - - - - - - - - - - - - - - - A2 - - - - - - - - - - GND - - - - - - - - - - Bobine2 - - - Bobine1 - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor-ce.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor-ce.png deleted file mode 100644 index b4d2b4a52fcb5c2722fda3c98cc07e72fc48b23b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor-ce.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor_out.svg b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor_out.svg deleted file mode 100644 index 9cf41d57713a9a6e23532fdb9edf6f7ad5d8a8f8..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/transistor_out.svg +++ /dev/null @@ -1,296 +0,0 @@ - - - - - - image/svg+xml - - - - - - - - -XCircuit Version 3.7 -File "npn_ce_out.ps" Page 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 100 kΩ - - - - PV2 - - - PV1 - - - A1 - - - GND - - - A2 - - - 1 kΩ - - diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/water-conduct.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/water-conduct.png deleted file mode 100644 index 1213c70dac76db5456330a21d684799803cdf50b..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_images/water-conduct.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/ajax-loader.gif b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/ajax-loader.gif deleted file mode 100644 index 61faf8cab23993bd3e1560bff0668bd628642330..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/ajax-loader.gif and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/basic.css b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/basic.css deleted file mode 100644 index 19ced1057aebf39d3dac6f6a5d864491231a3e33..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/basic.css +++ /dev/null @@ -1,665 +0,0 @@ -/* - * basic.css - * ~~~~~~~~~ - * - * Sphinx stylesheet -- basic theme. - * - * :copyright: Copyright 2007-2018 by the Sphinx team, see AUTHORS. - * :license: BSD, see LICENSE for details. - * - */ - -/* -- main layout ----------------------------------------------------------- */ - -div.clearer { - clear: both; -} - -/* -- relbar ---------------------------------------------------------------- */ - -div.related { - width: 100%; - font-size: 90%; -} - -div.related h3 { - display: none; -} - -div.related ul { - margin: 0; - padding: 0 0 0 10px; - list-style: none; -} - -div.related li { - display: inline; -} - -div.related li.right { - float: right; - margin-right: 5px; -} - -/* -- sidebar --------------------------------------------------------------- */ - -div.sphinxsidebarwrapper { - padding: 10px 5px 0 10px; -} - -div.sphinxsidebar { - float: left; - width: 230px; - margin-left: -100%; - font-size: 90%; - word-wrap: break-word; - overflow-wrap : break-word; -} - -div.sphinxsidebar ul { - list-style: none; -} - -div.sphinxsidebar ul ul, -div.sphinxsidebar ul.want-points { - margin-left: 20px; - list-style: square; -} - -div.sphinxsidebar ul ul { - margin-top: 0; - margin-bottom: 0; -} - -div.sphinxsidebar form { - margin-top: 10px; -} - -div.sphinxsidebar input { - border: 1px solid #98dbcc; - font-family: sans-serif; - font-size: 1em; -} - -div.sphinxsidebar #searchbox input[type="text"] { - float: left; - width: 80%; - padding: 0.25em; - box-sizing: border-box; -} - -div.sphinxsidebar #searchbox input[type="submit"] { - float: left; - width: 20%; - border-left: none; - padding: 0.25em; - box-sizing: border-box; -} - - -img { - border: 0; - max-width: 100%; -} - -/* -- search page ----------------------------------------------------------- */ - -ul.search { - margin: 10px 0 0 20px; - padding: 0; -} - -ul.search li { - padding: 5px 0 5px 20px; - background-image: url(file.png); - background-repeat: no-repeat; - background-position: 0 7px; -} - -ul.search li a { - font-weight: bold; -} - -ul.search li div.context { - color: #888; - margin: 2px 0 0 30px; - text-align: left; -} - -ul.keywordmatches li.goodmatch a { - font-weight: bold; -} - -/* -- index page ------------------------------------------------------------ */ - -table.contentstable { - width: 90%; - margin-left: auto; - margin-right: auto; -} - -table.contentstable p.biglink { - line-height: 150%; -} - -a.biglink { - font-size: 1.3em; -} - -span.linkdescr { - font-style: italic; - padding-top: 5px; - font-size: 90%; -} - -/* -- general index --------------------------------------------------------- */ - -table.indextable { - width: 100%; -} - -table.indextable td { - text-align: left; - vertical-align: top; -} - -table.indextable ul { - margin-top: 0; - margin-bottom: 0; - list-style-type: none; -} - -table.indextable > tbody > tr > td > ul { - padding-left: 0em; -} - -table.indextable tr.pcap { - height: 10px; -} - -table.indextable tr.cap { - margin-top: 10px; - background-color: #f2f2f2; -} - -img.toggler { - margin-right: 3px; - margin-top: 3px; - cursor: pointer; -} - -div.modindex-jumpbox { - border-top: 1px solid #ddd; - border-bottom: 1px solid #ddd; - margin: 1em 0 1em 0; - padding: 0.4em; -} - -div.genindex-jumpbox { - border-top: 1px solid #ddd; - border-bottom: 1px solid #ddd; - margin: 1em 0 1em 0; - padding: 0.4em; -} - -/* -- domain module index --------------------------------------------------- */ - -table.modindextable td { - padding: 2px; - border-collapse: collapse; -} - -/* -- general body styles --------------------------------------------------- */ - -div.body { - min-width: 450px; - max-width: 800px; -} - -div.body p, div.body dd, div.body li, div.body blockquote { - -moz-hyphens: auto; - -ms-hyphens: auto; - -webkit-hyphens: auto; - hyphens: auto; -} - -a.headerlink { - visibility: hidden; -} - -h1:hover > a.headerlink, -h2:hover > a.headerlink, -h3:hover > a.headerlink, -h4:hover > a.headerlink, -h5:hover > a.headerlink, -h6:hover > a.headerlink, -dt:hover > a.headerlink, -caption:hover > a.headerlink, -p.caption:hover > a.headerlink, -div.code-block-caption:hover > a.headerlink { - visibility: visible; -} - -div.body p.caption { - text-align: inherit; -} - -div.body td { - text-align: left; -} - -.first { - margin-top: 0 !important; -} - -p.rubric { - margin-top: 30px; - font-weight: bold; -} - -img.align-left, .figure.align-left, object.align-left { - clear: left; - float: left; - margin-right: 1em; -} - -img.align-right, .figure.align-right, object.align-right { - clear: right; - float: right; - margin-left: 1em; -} - -img.align-center, .figure.align-center, object.align-center { - display: block; - margin-left: auto; - margin-right: auto; -} - -.align-left { - text-align: left; -} - -.align-center { - text-align: center; -} - -.align-right { - text-align: right; -} - -/* -- sidebars -------------------------------------------------------------- */ - -div.sidebar { - margin: 0 0 0.5em 1em; - border: 1px solid #ddb; - padding: 7px 7px 0 7px; - background-color: #ffe; - width: 40%; - float: right; -} - -p.sidebar-title { - font-weight: bold; -} - -/* -- topics ---------------------------------------------------------------- */ - -div.topic { - border: 1px solid #ccc; - padding: 7px 7px 0 7px; - margin: 10px 0 10px 0; -} - -p.topic-title { - font-size: 1.1em; - font-weight: bold; - margin-top: 10px; -} - -/* -- admonitions ----------------------------------------------------------- */ - -div.admonition { - margin-top: 10px; - margin-bottom: 10px; - padding: 7px; -} - -div.admonition dt { - font-weight: bold; -} - -div.admonition dl { - margin-bottom: 0; -} - -p.admonition-title { - margin: 0px 10px 5px 0px; - font-weight: bold; -} - -div.body p.centered { - text-align: center; - margin-top: 25px; -} - -/* -- tables ---------------------------------------------------------------- */ - -table.docutils { - border: 0; - border-collapse: collapse; -} - -table.align-center { - margin-left: auto; - margin-right: auto; -} - -table caption span.caption-number { - font-style: italic; -} - -table caption span.caption-text { -} - -table.docutils td, table.docutils th { - padding: 1px 8px 1px 5px; - border-top: 0; - border-left: 0; - border-right: 0; - border-bottom: 1px solid #aaa; -} - -table.footnote td, table.footnote th { - border: 0 !important; -} - -th { - text-align: left; - padding-right: 5px; -} - -table.citation { - border-left: solid 1px gray; - margin-left: 1px; -} - -table.citation td { - border-bottom: none; -} - -/* -- figures --------------------------------------------------------------- */ - -div.figure { - margin: 0.5em; - padding: 0.5em; -} - -div.figure p.caption { - padding: 0.3em; -} - -div.figure p.caption span.caption-number { - font-style: italic; -} - -div.figure p.caption span.caption-text { -} - -/* -- field list styles ----------------------------------------------------- */ - -table.field-list td, table.field-list th { - border: 0 !important; -} - -.field-list ul { - margin: 0; - padding-left: 1em; -} - -.field-list p { - margin: 0; -} - -.field-name { - -moz-hyphens: manual; - -ms-hyphens: manual; - -webkit-hyphens: manual; - hyphens: manual; -} - -/* -- other body styles ----------------------------------------------------- */ - -ol.arabic { - list-style: decimal; -} - -ol.loweralpha { - list-style: lower-alpha; -} - -ol.upperalpha { - list-style: upper-alpha; -} - -ol.lowerroman { - list-style: lower-roman; -} - -ol.upperroman { - list-style: upper-roman; -} - -dl { - margin-bottom: 15px; -} - -dd p { - margin-top: 0px; -} - -dd ul, dd table { - margin-bottom: 10px; -} - -dd { - margin-top: 3px; - margin-bottom: 10px; - margin-left: 30px; -} - -dt:target, span.highlighted { - background-color: #fbe54e; -} - -rect.highlighted { - fill: #fbe54e; -} - -dl.glossary dt { - font-weight: bold; - font-size: 1.1em; -} - -.optional { - font-size: 1.3em; -} - -.sig-paren { - font-size: larger; -} - -.versionmodified { - font-style: italic; -} - -.system-message { - background-color: #fda; - padding: 5px; - border: 3px solid red; -} - -.footnote:target { - background-color: #ffa; -} - -.line-block { - display: block; - margin-top: 1em; - margin-bottom: 1em; -} - -.line-block .line-block { - margin-top: 0; - margin-bottom: 0; - margin-left: 1.5em; -} - -.guilabel, .menuselection { - font-family: sans-serif; -} - -.accelerator { - text-decoration: underline; -} - -.classifier { - font-style: oblique; -} - -abbr, acronym { - border-bottom: dotted 1px; - cursor: help; -} - -/* -- code displays --------------------------------------------------------- */ - -pre { - overflow: auto; - overflow-y: hidden; /* fixes display issues on Chrome browsers */ -} - -span.pre { - -moz-hyphens: none; - -ms-hyphens: none; - -webkit-hyphens: none; - hyphens: none; -} - -td.linenos pre { - padding: 5px 0px; - border: 0; - background-color: transparent; - color: #aaa; -} - -table.highlighttable { - margin-left: 0.5em; -} - -table.highlighttable td { - padding: 0 0.5em 0 0.5em; -} - -div.code-block-caption { - padding: 2px 5px; - font-size: small; -} - -div.code-block-caption code { - background-color: transparent; -} - -div.code-block-caption + div > div.highlight > pre { - margin-top: 0; -} - -div.code-block-caption span.caption-number { - padding: 0.1em 0.3em; - font-style: italic; -} - -div.code-block-caption span.caption-text { -} - -div.literal-block-wrapper { - padding: 1em 1em 0; -} - -div.literal-block-wrapper div.highlight { - margin: 0; -} - -code.descname { - background-color: transparent; - font-weight: bold; - font-size: 1.2em; -} - -code.descclassname { - background-color: transparent; -} - -code.xref, a code { - background-color: transparent; - font-weight: bold; -} - -h1 code, h2 code, h3 code, h4 code, h5 code, h6 code { - background-color: transparent; -} - -.viewcode-link { - float: right; -} - -.viewcode-back { - float: right; - font-family: sans-serif; -} - -div.viewcode-block:target { - margin: -1px -10px; - padding: 0 10px; -} - -/* -- math display ---------------------------------------------------------- */ - -img.math { - vertical-align: middle; -} - -div.body div.math p { - text-align: center; -} - -span.eqno { - float: right; -} - -span.eqno a.headerlink { - position: relative; - left: 0px; - z-index: 1; -} - -div.math:hover a.headerlink { - visibility: visible; -} - -/* -- printout stylesheet --------------------------------------------------- */ - -@media print { - div.document, - div.documentwrapper, - div.bodywrapper { - margin: 0 !important; - width: 100%; - } - - div.sphinxsidebar, - div.related, - div.footer, - #top-link { - display: none; - } -} \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-bright.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-bright.png deleted file mode 100644 index 15e27edb12ac25701ac0ac21b97b52bb4e45415e..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-bright.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-close.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-close.png deleted file mode 100644 index 4d91bcf57de866a901a89a2a68c0f36af1114841..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment-close.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment.png deleted file mode 100644 index dfbc0cbd512bdeefcb1984c99d8e577efb77f006..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/comment.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/contents.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/contents.png deleted file mode 100644 index 6c59aa1f9c8c3b754b258b8ab4f6b95971c99109..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/contents.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/doctools.js b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/doctools.js deleted file mode 100644 index d8928926bf24bb081d91a12f7b92e1b2d8b142b6..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/doctools.js +++ /dev/null @@ -1,313 +0,0 @@ -/* - * doctools.js - * ~~~~~~~~~~~ - * - * Sphinx JavaScript utilities for all documentation. - * - * :copyright: Copyright 2007-2018 by the Sphinx team, see AUTHORS. - * :license: BSD, see LICENSE for details. - * - */ - -/** - * select a different prefix for underscore - */ -$u = _.noConflict(); - -/** - * make the code below compatible with browsers without - * an installed firebug like debugger -if (!window.console || !console.firebug) { - var names = ["log", "debug", "info", "warn", "error", "assert", "dir", - "dirxml", "group", "groupEnd", "time", "timeEnd", "count", "trace", - "profile", "profileEnd"]; - window.console = {}; - for (var i = 0; i < names.length; ++i) - window.console[names[i]] = function() {}; -} - */ - -/** - * small helper function to urldecode strings - */ -jQuery.urldecode = function(x) { - return decodeURIComponent(x).replace(/\+/g, ' '); -}; - -/** - * small helper function to urlencode strings - */ -jQuery.urlencode = encodeURIComponent; - -/** - * This function returns the parsed url parameters of the - * current request. Multiple values per key are supported, - * it will always return arrays of strings for the value parts. - */ -jQuery.getQueryParameters = function(s) { - if (typeof s === 'undefined') - s = document.location.search; - var parts = s.substr(s.indexOf('?') + 1).split('&'); - var result = {}; - for (var i = 0; i < parts.length; i++) { - var tmp = parts[i].split('=', 2); - var key = jQuery.urldecode(tmp[0]); - var value = jQuery.urldecode(tmp[1]); - if (key in result) - result[key].push(value); - else - result[key] = [value]; - } - return result; -}; - -/** - * highlight a given string on a jquery object by wrapping it in - * span elements with the given class name. - */ -jQuery.fn.highlightText = function(text, className) { - function highlight(node, addItems) { - if (node.nodeType === 3) { - var val = node.nodeValue; - var pos = val.toLowerCase().indexOf(text); - if (pos >= 0 && - !jQuery(node.parentNode).hasClass(className) && - !jQuery(node.parentNode).hasClass("nohighlight")) { - var span; - var isInSVG = jQuery(node).closest("body, svg, foreignObject").is("svg"); - if (isInSVG) { - span = document.createElementNS("http://www.w3.org/2000/svg", "tspan"); - } else { - span = document.createElement("span"); - span.className = className; - } - span.appendChild(document.createTextNode(val.substr(pos, text.length))); - node.parentNode.insertBefore(span, node.parentNode.insertBefore( - document.createTextNode(val.substr(pos + text.length)), - node.nextSibling)); - node.nodeValue = val.substr(0, pos); - if (isInSVG) { - var bbox = span.getBBox(); - var rect = document.createElementNS("http://www.w3.org/2000/svg", "rect"); - rect.x.baseVal.value = bbox.x; - rect.y.baseVal.value = bbox.y; - rect.width.baseVal.value = bbox.width; - rect.height.baseVal.value = bbox.height; - rect.setAttribute('class', className); - var parentOfText = node.parentNode.parentNode; - addItems.push({ - "parent": node.parentNode, - "target": rect}); - } - } - } - else if (!jQuery(node).is("button, select, textarea")) { - jQuery.each(node.childNodes, function() { - highlight(this, addItems); - }); - } - } - var addItems = []; - var result = this.each(function() { - highlight(this, addItems); - }); - for (var i = 0; i < addItems.length; ++i) { - jQuery(addItems[i].parent).before(addItems[i].target); - } - return result; -}; - -/* - * backward compatibility for jQuery.browser - * This will be supported until firefox bug is fixed. - */ -if (!jQuery.browser) { - jQuery.uaMatch = function(ua) { - ua = ua.toLowerCase(); - - var match = /(chrome)[ \/]([\w.]+)/.exec(ua) || - /(webkit)[ \/]([\w.]+)/.exec(ua) || - /(opera)(?:.*version|)[ \/]([\w.]+)/.exec(ua) || - /(msie) ([\w.]+)/.exec(ua) || - ua.indexOf("compatible") < 0 && /(mozilla)(?:.*? rv:([\w.]+)|)/.exec(ua) || - []; - - return { - browser: match[ 1 ] || "", - version: match[ 2 ] || "0" - }; - }; - jQuery.browser = {}; - jQuery.browser[jQuery.uaMatch(navigator.userAgent).browser] = true; -} - -/** - * Small JavaScript module for the documentation. - */ -var Documentation = { - - init : function() { - this.fixFirefoxAnchorBug(); - this.highlightSearchWords(); - this.initIndexTable(); - - }, - - /** - * i18n support - */ - TRANSLATIONS : {}, - PLURAL_EXPR : function(n) { return n === 1 ? 0 : 1; }, - LOCALE : 'unknown', - - // gettext and ngettext don't access this so that the functions - // can safely bound to a different name (_ = Documentation.gettext) - gettext : function(string) { - var translated = Documentation.TRANSLATIONS[string]; - if (typeof translated === 'undefined') - return string; - return (typeof translated === 'string') ? translated : translated[0]; - }, - - ngettext : function(singular, plural, n) { - var translated = Documentation.TRANSLATIONS[singular]; - if (typeof translated === 'undefined') - return (n == 1) ? singular : plural; - return translated[Documentation.PLURALEXPR(n)]; - }, - - addTranslations : function(catalog) { - for (var key in catalog.messages) - this.TRANSLATIONS[key] = catalog.messages[key]; - this.PLURAL_EXPR = new Function('n', 'return +(' + catalog.plural_expr + ')'); - this.LOCALE = catalog.locale; - }, - - /** - * add context elements like header anchor links - */ - addContextElements : function() { - $('div[id] > :header:first').each(function() { - $('\u00B6'). - attr('href', '#' + this.id). - attr('title', _('Permalink to this headline')). - appendTo(this); - }); - $('dt[id]').each(function() { - $('\u00B6'). - attr('href', '#' + this.id). - attr('title', _('Permalink to this definition')). - appendTo(this); - }); - }, - - /** - * workaround a firefox stupidity - * see: https://bugzilla.mozilla.org/show_bug.cgi?id=645075 - */ - fixFirefoxAnchorBug : function() { - if (document.location.hash && $.browser.mozilla) - window.setTimeout(function() { - document.location.href += ''; - }, 10); - }, - - /** - * highlight the search words provided in the url in the text - */ - highlightSearchWords : function() { - var params = $.getQueryParameters(); - var terms = (params.highlight) ? params.highlight[0].split(/\s+/) : []; - if (terms.length) { - var body = $('div.body'); - if (!body.length) { - body = $('body'); - } - window.setTimeout(function() { - $.each(terms, function() { - body.highlightText(this.toLowerCase(), 'highlighted'); - }); - }, 10); - $('') - .appendTo($('#searchbox')); - } - }, - - /** - * init the domain index toggle buttons - */ - initIndexTable : function() { - var togglers = $('img.toggler').click(function() { - var src = $(this).attr('src'); - var idnum = $(this).attr('id').substr(7); - $('tr.cg-' + idnum).toggle(); - if (src.substr(-9) === 'minus.png') - $(this).attr('src', src.substr(0, src.length-9) + 'plus.png'); - else - $(this).attr('src', src.substr(0, src.length-8) + 'minus.png'); - }).css('display', ''); - if (DOCUMENTATION_OPTIONS.COLLAPSE_INDEX) { - togglers.click(); - } - }, - - /** - * helper function to hide the search marks again - */ - hideSearchWords : function() { - $('#searchbox .highlight-link').fadeOut(300); - $('span.highlighted').removeClass('highlighted'); - }, - - /** - * make the url absolute - */ - makeURL : function(relativeURL) { - return DOCUMENTATION_OPTIONS.URL_ROOT + '/' + relativeURL; - }, - - /** - * get the current relative url - */ - getCurrentURL : function() { - var path = document.location.pathname; - var parts = path.split(/\//); - $.each(DOCUMENTATION_OPTIONS.URL_ROOT.split(/\//), function() { - if (this === '..') - parts.pop(); - }); - var url = parts.join('/'); - return path.substring(url.lastIndexOf('/') + 1, path.length - 1); - }, - - initOnKeyListeners: function() { - $(document).keyup(function(event) { - var activeElementType = document.activeElement.tagName; - // don't navigate when in search box or textarea - if (activeElementType !== 'TEXTAREA' && activeElementType !== 'INPUT' && activeElementType !== 'SELECT') { - switch (event.keyCode) { - case 37: // left - var prevHref = $('link[rel="prev"]').prop('href'); - if (prevHref) { - window.location.href = prevHref; - return false; - } - case 39: // right - var nextHref = $('link[rel="next"]').prop('href'); - if (nextHref) { - window.location.href = nextHref; - return false; - } - } - } - }); - } -}; - -// quick alias for translations -_ = Documentation.gettext; - -$(document).ready(function() { - Documentation.init(); -}); \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/documentation_options.js b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/documentation_options.js deleted file mode 100644 index fcafa36e251a009c8717612060e57b5ad2250a9b..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/documentation_options.js +++ /dev/null @@ -1,9 +0,0 @@ -var DOCUMENTATION_OPTIONS = { - URL_ROOT: document.getElementById("documentation_options").getAttribute('data-url_root'), - VERSION: '1.0', - LANGUAGE: 'fr', - COLLAPSE_INDEX: false, - FILE_SUFFIX: '.html', - HAS_SOURCE: true, - SOURCELINK_SUFFIX: '.txt' -}; \ No newline at end of file diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down-pressed.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down-pressed.png deleted file mode 100644 index 5756c8cad8854722893dc70b9eb4bb0400343a39..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down-pressed.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down.png deleted file mode 100644 index 1b3bdad2ceffae91cee61b32f3295f9bbe646e48..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/down.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/file.png b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/file.png deleted file mode 100644 index a858a410e4faa62ce324d814e4b816fff83a6fb3..0000000000000000000000000000000000000000 Binary files a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/file.png and /dev/null differ diff --git a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/jquery.js b/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/jquery.js deleted file mode 100644 index ba171ca3fd8887fa258e427020fa15f82c68cac3..0000000000000000000000000000000000000000 --- a/ExpEYES17/UserManual/fr/rst/qt5HTML/_static/jquery.js +++ /dev/null @@ -1,10253 +0,0 @@ -/*! - * jQuery JavaScript Library v3.2.1 - * https://jquery.com/ - * - * Includes Sizzle.js - * https://sizzlejs.com/ - * - * Copyright JS Foundation and other contributors - * Released under the MIT license - * https://jquery.org/license - * - * Date: 2017-09-03T00:14Z - */ -( function( global, factory ) { - - "use strict"; - - if ( typeof module === "object" && typeof module.exports === "object" ) { - - // For CommonJS and CommonJS-like environments where a proper `window` - // is present, execute the factory and get jQuery. - // For environments that do not have a `window` with a `document` - // (such as Node.js), expose a factory as module.exports. - // This accentuates the need for the creation of a real `window`. - // e.g. var jQuery = require("jquery")(window); - // See ticket #14549 for more info. - module.exports = global.document ? - factory( global, true ) : - function( w ) { - if ( !w.document ) { - throw new Error( "jQuery requires a window with a document" ); - } - return factory( w ); - }; - } else { - factory( global ); - } - -// Pass this if window is not defined yet -} )( typeof window !== "undefined" ? window : this, function( window, noGlobal ) { - -// Edge <= 12 - 13+, Firefox <=18 - 45+, IE 10 - 11, Safari 5.1 - 9+, iOS 6 - 9.1 -// throw exceptions when non-strict code (e.g., ASP.NET 4.5) accesses strict mode -// arguments.callee.caller (trac-13335). But as of jQuery 3.0 (2016), strict mode should be common -// enough that all such attempts are guarded in a try block. - - -var arr = []; - -var document = window.document; - -var getProto = Object.getPrototypeOf; - -var slice = arr.slice; - -var concat = arr.concat; - -var push = arr.push; - -var indexOf = arr.indexOf; - -var class2type = {}; - -var toString = class2type.toString; - -var hasOwn = class2type.hasOwnProperty; - -var fnToString = hasOwn.toString; - -var ObjectFunctionString = fnToString.call( Object ); - -var support = {}; - - - - function DOMEval( code, doc ) { - doc = doc || document; - - var script = doc.createElement( "script" ); - - script.text = code; - doc.head.appendChild( script ).parentNode.removeChild( script ); - } -/* global Symbol */ -// Defining this global in .eslintrc.json would create a danger of using the global -// unguarded in another place, it seems safer to define global only for this module - - - -var - version = "3.2.1", - - // Define a local copy of jQuery - jQuery = function( selector, context ) { - - // The jQuery object is actually just the init constructor 'enhanced' - // Need init if jQuery is called (just allow error to be thrown if not included) - return new jQuery.fn.init( selector, context ); - }, - - // Support: Android <=4.0 only - // Make sure we trim BOM and NBSP - rtrim = /^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g, - - // Matches dashed string for camelizing - rmsPrefix = /^-ms-/, - rdashAlpha = /-([a-z])/g, - - // Used by jQuery.camelCase as callback to replace() - fcamelCase = function( all, letter ) { - return letter.toUpperCase(); - }; - -jQuery.fn = jQuery.prototype = { - - // The current version of jQuery being used - jquery: version, - - constructor: jQuery, - - // The default length of a jQuery object is 0 - length: 0, - - toArray: function() { - return slice.call( this ); - }, - - // Get the Nth element in the matched element set OR - // Get the whole matched element set as a clean array - get: function( num ) { - - // Return all the elements in a clean array - if ( num == null ) { - return slice.call( this ); - } - - // Return just the one element from the set - return num < 0 ? this[ num + this.length ] : this[ num ]; - }, - - // Take an array of elements and push it onto the stack - // (returning the new matched element set) - pushStack: function( elems ) { - - // Build a new jQuery matched element set - var ret = jQuery.merge( this.constructor(), elems ); - - // Add the old object onto the stack (as a reference) - ret.prevObject = this; - - // Return the newly-formed element set - return ret; - }, - - // Execute a callback for every element in the matched set. - each: function( callback ) { - return jQuery.each( this, callback ); - }, - - map: function( callback ) { - return this.pushStack( jQuery.map( this, function( elem, i ) { - return callback.call( elem, i, elem ); - } ) ); - }, - - slice: function() { - return this.pushStack( slice.apply( this, arguments ) ); - }, - - first: function() { - return this.eq( 0 ); - }, - - last: function() { - return this.eq( -1 ); - }, - - eq: function( i ) { - var len = this.length, - j = +i + ( i < 0 ? len : 0 ); - return this.pushStack( j >= 0 && j < len ? [ this[ j ] ] : [] ); - }, - - end: function() { - return this.prevObject || this.constructor(); - }, - - // For internal use only. - // Behaves like an Array's method, not like a jQuery method. - push: push, - sort: arr.sort, - splice: arr.splice -}; - -jQuery.extend = jQuery.fn.extend = function() { - var options, name, src, copy, copyIsArray, clone, - target = arguments[ 0 ] || {}, - i = 1, - length = arguments.length, - deep = false; - - // Handle a deep copy situation - if ( typeof target === "boolean" ) { - deep = target; - - // Skip the boolean and the target - target = arguments[ i ] || {}; - i++; - } - - // Handle case when target is a string or something (possible in deep copy) - if ( typeof target !== "object" && !jQuery.isFunction( target ) ) { - target = {}; - } - - // Extend jQuery itself if only one argument is passed - if ( i === length ) { - target = this; - i--; - } - - for ( ; i < length; i++ ) { - - // Only deal with non-null/undefined values - if ( ( options = arguments[ i ] ) != null ) { - - // Extend the base object - for ( name in options ) { - src = target[ name ]; - copy = options[ name ]; - - // Prevent never-ending loop - if ( target === copy ) { - continue; - } - - // Recurse if we're merging plain objects or arrays - if ( deep && copy && ( jQuery.isPlainObject( copy ) || - ( copyIsArray = Array.isArray( copy ) ) ) ) { - - if ( copyIsArray ) { - copyIsArray = false; - clone = src && Array.isArray( src ) ? src : []; - - } else { - clone = src && jQuery.isPlainObject( src ) ? src : {}; - } - - // Never move original objects, clone them - target[ name ] = jQuery.extend( deep, clone, copy ); - - // Don't bring in undefined values - } else if ( copy !== undefined ) { - target[ name ] = copy; - } - } - } - } - - // Return the modified object - return target; -}; - -jQuery.extend( { - - // Unique for each copy of jQuery on the page - expando: "jQuery" + ( version + Math.random() ).replace( /\D/g, "" ), - - // Assume jQuery is ready without the ready module - isReady: true, - - error: function( msg ) { - throw new Error( msg ); - }, - - noop: function() {}, - - isFunction: function( obj ) { - return jQuery.type( obj ) === "function"; - }, - - isWindow: function( obj ) { - return obj != null && obj === obj.window; - }, - - isNumeric: function( obj ) { - - // As of jQuery 3.0, isNumeric is limited to - // strings and numbers (primitives or objects) - // that can be coerced to finite numbers (gh-2662) - var type = jQuery.type( obj ); - return ( type === "number" || type === "string" ) && - - // parseFloat NaNs numeric-cast false positives ("") - // ...but misinterprets leading-number strings, particularly hex literals ("0x...") - // subtraction forces infinities to NaN - !isNaN( obj - parseFloat( obj ) ); - }, - - isPlainObject: function( obj ) { - var proto, Ctor; - - // Detect obvious negatives - // Use toString instead of jQuery.type to catch host objects - if ( !obj || toString.call( obj ) !== "[object Object]" ) { - return false; - } - - proto = getProto( obj ); - - // Objects with no prototype (e.g., `Object.create( null )`) are plain - if ( !proto ) { - return true; - } - - // Objects with prototype are plain iff they were constructed by a global Object function - Ctor = hasOwn.call( proto, "constructor" ) && proto.constructor; - return typeof Ctor === "function" && fnToString.call( Ctor ) === ObjectFunctionString; - }, - - isEmptyObject: function( obj ) { - - /* eslint-disable no-unused-vars */ - // See https://github.com/eslint/eslint/issues/6125 - var name; - - for ( name in obj ) { - return false; - } - return true; - }, - - type: function( obj ) { - if ( obj == null ) { - return obj + ""; - } - - // Support: Android <=2.3 only (functionish RegExp) - return typeof obj === "object" || typeof obj === "function" ? - class2type[ toString.call( obj ) ] || "object" : - typeof obj; - }, - - // Evaluates a script in a global context - globalEval: function( code ) { - DOMEval( code ); - }, - - // Convert dashed to camelCase; used by the css and data modules - // Support: IE <=9 - 11, Edge 12 - 13 - // Microsoft forgot to hump their vendor prefix (#9572) - camelCase: function( string ) { - return string.replace( rmsPrefix, "ms-" ).replace( rdashAlpha, fcamelCase ); - }, - - each: function( obj, callback ) { - var length, i = 0; - - if ( isArrayLike( obj ) ) { - length = obj.length; - for ( ; i < length; i++ ) { - if ( callback.call( obj[ i ], i, obj[ i ] ) === false ) { - break; - } - } - } else { - for ( i in obj ) { - if ( callback.call( obj[ i ], i, obj[ i ] ) === false ) { - break; - } - } - } - - return obj; - }, - - // Support: Android <=4.0 only - trim: function( text ) { - return text == null ? - "" : - ( text + "" ).replace( rtrim, "" ); - }, - - // results is for internal usage only - makeArray: function( arr, results ) { - var ret = results || []; - - if ( arr != null ) { - if ( isArrayLike( Object( arr ) ) ) { - jQuery.merge( ret, - typeof arr === "string" ? - [ arr ] : arr - ); - } else { - push.call( ret, arr ); - } - } - - return ret; - }, - - inArray: function( elem, arr, i ) { - return arr == null ? -1 : indexOf.call( arr, elem, i ); - }, - - // Support: Android <=4.0 only, PhantomJS 1 only - // push.apply(_, arraylike) throws on ancient WebKit - merge: function( first, second ) { - var len = +second.length, - j = 0, - i = first.length; - - for ( ; j < len; j++ ) { - first[ i++ ] = second[ j ]; - } - - first.length = i; - - return first; - }, - - grep: function( elems, callback, invert ) { - var callbackInverse, - matches = [], - i = 0, - length = elems.length, - callbackExpect = !invert; - - // Go through the array, only saving the items - // that pass the validator function - for ( ; i < length; i++ ) { - callbackInverse = !callback( elems[ i ], i ); - if ( callbackInverse !== callbackExpect ) { - matches.push( elems[ i ] ); - } - } - - return matches; - }, - - // arg is for internal usage only - map: function( elems, callback, arg ) { - var length, value, - i = 0, - ret = []; - - // Go through the array, translating each of the items to their new values - if ( isArrayLike( elems ) ) { - length = elems.length; - for ( ; i < length; i++ ) { - value = callback( elems[ i ], i, arg ); - - if ( value != null ) { - ret.push( value ); - } - } - - // Go through every key on the object, - } else { - for ( i in elems ) { - value = callback( elems[ i ], i, arg ); - - if ( value != null ) { - ret.push( value ); - } - } - } - - // Flatten any nested arrays - return concat.apply( [], ret ); - }, - - // A global GUID counter for objects - guid: 1, - - // Bind a function to a context, optionally partially applying any - // arguments. - proxy: function( fn, context ) { - var tmp, args, proxy; - - if ( typeof context === "string" ) { - tmp = fn[ context ]; - context = fn; - fn = tmp; - } - - // Quick check to determine if target is callable, in the spec - // this throws a TypeError, but we will just return undefined. - if ( !jQuery.isFunction( fn ) ) { - return undefined; - } - - // Simulated bind - args = slice.call( arguments, 2 ); - proxy = function() { - return fn.apply( context || this, args.concat( slice.call( arguments ) ) ); - }; - - // Set the guid of unique handler to the same of original handler, so it can be removed - proxy.guid = fn.guid = fn.guid || jQuery.guid++; - - return proxy; - }, - - now: Date.now, - - // jQuery.support is not used in Core but other projects attach their - // properties to it so it needs to exist. - support: support -} ); - -if ( typeof Symbol === "function" ) { - jQuery.fn[ Symbol.iterator ] = arr[ Symbol.iterator ]; -} - -// Populate the class2type map -jQuery.each( "Boolean Number String Function Array Date RegExp Object Error Symbol".split( " " ), -function( i, name ) { - class2type[ "[object " + name + "]" ] = name.toLowerCase(); -} ); - -function isArrayLike( obj ) { - - // Support: real iOS 8.2 only (not reproducible in simulator) - // `in` check used to prevent JIT error (gh-2145) - // hasOwn isn't used here due to false negatives - // regarding Nodelist length in IE - var length = !!obj && "length" in obj && obj.length, - type = jQuery.type( obj ); - - if ( type === "function" || jQuery.isWindow( obj ) ) { - return false; - } - - return type === "array" || length === 0 || - typeof length === "number" && length > 0 && ( length - 1 ) in obj; -} -var Sizzle = -/*! - * Sizzle CSS Selector Engine v2.3.3 - * https://sizzlejs.com/ - * - * Copyright jQuery Foundation and other contributors - * Released under the MIT license - * http://jquery.org/license - * - * Date: 2016-08-08 - */ -(function( window ) { - -var i, - support, - Expr, - getText, - isXML, - tokenize, - compile, - select, - outermostContext, - sortInput, - hasDuplicate, - - // Local document vars - setDocument, - document, - docElem, - documentIsHTML, - rbuggyQSA, - rbuggyMatches, - matches, - contains, - - // Instance-specific data - expando = "sizzle" + 1 * new Date(), - preferredDoc = window.document, - dirruns = 0, - done = 0, - classCache = createCache(), - tokenCache = createCache(), - compilerCache = createCache(), - sortOrder = function( a, b ) { - if ( a === b ) { - hasDuplicate = true; - } - return 0; - }, - - // Instance methods - hasOwn = ({}).hasOwnProperty, - arr = [], - pop = arr.pop, - push_native = arr.push, - push = arr.push, - slice = arr.slice, - // Use a stripped-down indexOf as it's faster than native - // https://jsperf.com/thor-indexof-vs-for/5 - indexOf = function( list, elem ) { - var i = 0, - len = list.length; - for ( ; i < len; i++ ) { - if ( list[i] === elem ) { - return i; - } - } - return -1; - }, - - booleans = "checked|selected|async|autofocus|autoplay|controls|defer|disabled|hidden|ismap|loop|multiple|open|readonly|required|scoped", - - // Regular expressions - - // http://www.w3.org/TR/css3-selectors/#whitespace - whitespace = "[\\x20\\t\\r\\n\\f]", - - // http://www.w3.org/TR/CSS21/syndata.html#value-def-identifier - identifier = "(?:\\\\.|[\\w-]|[^\0-\\xa0])+", - - // Attribute selectors: http://www.w3.org/TR/selectors/#attribute-selectors - attributes = "\\[" + whitespace + "*(" + identifier + ")(?:" + whitespace + - // Operator (capture 2) - "*([*^$|!~]?=)" + whitespace + - // "Attribute values must be CSS identifiers [capture 5] or strings [capture 3 or capture 4]" - "*(?:'((?:\\\\.|[^\\\\'])*)'|\"((?:\\\\.|[^\\\\\"])*)\"|(" + identifier + "))|)" + whitespace + - "*\\]", - - pseudos = ":(" + identifier + ")(?:\\((" + - // To reduce the number of selectors needing tokenize in the preFilter, prefer arguments: - // 1. quoted (capture 3; capture 4 or capture 5) - "('((?:\\\\.|[^\\\\'])*)'|\"((?:\\\\.|[^\\\\\"])*)\")|" + - // 2. simple (capture 6) - "((?:\\\\.|[^\\\\()[\\]]|" + attributes + ")*)|" + - // 3. anything else (capture 2) - ".*" + - ")\\)|)", - - // Leading and non-escaped trailing whitespace, capturing some non-whitespace characters preceding the latter - rwhitespace = new RegExp( whitespace + "+", "g" ), - rtrim = new RegExp( "^" + whitespace + "+|((?:^|[^\\\\])(?:\\\\.)*)" + whitespace + "+$", "g" ), - - rcomma = new RegExp( "^" + whitespace + "*," + whitespace + "*" ), - rcombinators = new RegExp( "^" + whitespace + "*([>+~]|" + whitespace + ")" + whitespace + "*" ), - - rattributeQuotes = new RegExp( "=" + whitespace + "*([^\\]'\"]*?)" + whitespace + "*\\]", "g" ), - - rpseudo = new RegExp( pseudos ), - ridentifier = new RegExp( "^" + identifier + "$" ), - - matchExpr = { - "ID": new RegExp( "^#(" + identifier + ")" ), - "CLASS": new RegExp( "^\\.(" + identifier + ")" ), - "TAG": new RegExp( "^(" + identifier + "|[*])" ), - "ATTR": new RegExp( "^" + attributes ), - "PSEUDO": new RegExp( "^" + pseudos ), - "CHILD": new RegExp( "^:(only|first|last|nth|nth-last)-(child|of-type)(?:\\(" + whitespace + - "*(even|odd|(([+-]|)(\\d*)n|)" + whitespace + "*(?:([+-]|)" + whitespace + - "*(\\d+)|))" + whitespace + "*\\)|)", "i" ), - "bool": new RegExp( "^(?:" + booleans + ")$", "i" ), - // For use in libraries implementing .is() - // We use this for POS matching in `select` - "needsContext": new RegExp( "^" + whitespace + "*[>+~]|:(even|odd|eq|gt|lt|nth|first|last)(?:\\(" + - whitespace + "*((?:-\\d)?\\d*)" + whitespace + "*\\)|)(?=[^-]|$)", "i" ) - }, - - rinputs = /^(?:input|select|textarea|button)$/i, - rheader = /^h\d$/i, - - rnative = /^[^{]+\{\s*\[native \w/, - - // Easily-parseable/retrievable ID or TAG or CLASS selectors - rquickExpr = /^(?:#([\w-]+)|(\w+)|\.([\w-]+))$/, - - rsibling = /[+~]/, - - // CSS escapes - // http://www.w3.org/TR/CSS21/syndata.html#escaped-characters - runescape = new RegExp( "\\\\([\\da-f]{1,6}" + whitespace + "?|(" + whitespace + ")|.)", "ig" ), - funescape = function( _, escaped, escapedWhitespace ) { - var high = "0x" + escaped - 0x10000; - // NaN means non-codepoint - // Support: Firefox<24 - // Workaround erroneous numeric interpretation of +"0x" - return high !== high || escapedWhitespace ? - escaped : - high < 0 ? - // BMP codepoint - String.fromCharCode( high + 0x10000 ) : - // Supplemental Plane codepoint (surrogate pair) - String.fromCharCode( high >> 10 | 0xD800, high & 0x3FF | 0xDC00 ); - }, - - // CSS string/identifier serialization - // https://drafts.csswg.org/cssom/#common-serializing-idioms - rcssescape = /([\0-\x1f\x7f]|^-?\d)|^-$|[^\0-\x1f\x7f-\uFFFF\w-]/g, - fcssescape = function( ch, asCodePoint ) { - if ( asCodePoint ) { - - // U+0000 NULL becomes U+FFFD REPLACEMENT CHARACTER - if ( ch === "\0" ) { - return "\uFFFD"; - } - - // Control characters and (dependent upon position) numbers get escaped as code points - return ch.slice( 0, -1 ) + "\\" + ch.charCodeAt( ch.length - 1 ).toString( 16 ) + " "; - } - - // Other potentially-special ASCII characters get backslash-escaped - return "\\" + ch; - }, - - // Used for iframes - // See setDocument() - // Removing the function wrapper causes a "Permission Denied" - // error in IE - unloadHandler = function() { - setDocument(); - }, - - disabledAncestor = addCombinator( - function( elem ) { - return elem.disabled === true && ("form" in elem || "label" in elem); - }, - { dir: "parentNode", next: "legend" } - ); - -// Optimize for push.apply( _, NodeList ) -try { - push.apply( - (arr = slice.call( preferredDoc.childNodes )), - preferredDoc.childNodes - ); - // Support: Android<4.0 - // Detect silently failing push.apply - arr[ preferredDoc.childNodes.length ].nodeType; -} catch ( e ) { - push = { apply: arr.length ? - - // Leverage slice if possible - function( target, els ) { - push_native.apply( target, slice.call(els) ); - } : - - // Support: IE<9 - // Otherwise append directly - function( target, els ) { - var j = target.length, - i = 0; - // Can't trust NodeList.length - while ( (target[j++] = els[i++]) ) {} - target.length = j - 1; - } - }; -} - -function Sizzle( selector, context, results, seed ) { - var m, i, elem, nid, match, groups, newSelector, - newContext = context && context.ownerDocument, - - // nodeType defaults to 9, since context defaults to document - nodeType = context ? context.nodeType : 9; - - results = results || []; - - // Return early from calls with invalid selector or context - if ( typeof selector !== "string" || !selector || - nodeType !== 1 && nodeType !== 9 && nodeType !== 11 ) { - - return results; - } - - // Try to shortcut find operations (as opposed to filters) in HTML documents - if ( !seed ) { - - if ( ( context ? context.ownerDocument || context : preferredDoc ) !== document ) { - setDocument( context ); - } - context = context || document; - - if ( documentIsHTML ) { - - // If the selector is sufficiently simple, try using a "get*By*" DOM method - // (excepting DocumentFragment context, where the methods don't exist) - if ( nodeType !== 11 && (match = rquickExpr.exec( selector )) ) { - - // ID selector - if ( (m = match[1]) ) { - - // Document context - if ( nodeType === 9 ) { - if ( (elem = context.getElementById( m )) ) { - - // Support: IE, Opera, Webkit - // TODO: identify versions - // getElementById can match elements by name instead of ID - if ( elem.id === m ) { - results.push( elem ); - return results; - } - } else { - return results; - } - - // Element context - } else { - - // Support: IE, Opera, Webkit - // TODO: identify versions - // getElementById can match elements by name instead of ID - if ( newContext && (elem = newContext.getElementById( m )) && - contains( context, elem ) && - elem.id === m ) { - - results.push( elem ); - return results; - } - } - - // Type selector - } else if ( match[2] ) { - push.apply( results, context.getElementsByTagName( selector ) ); - return results; - - // Class selector - } else if ( (m = match[3]) && support.getElementsByClassName && - context.getElementsByClassName ) { - - push.apply( results, context.getElementsByClassName( m ) ); - return results; - } - } - - // Take advantage of querySelectorAll - if ( support.qsa && - !compilerCache[ selector + " " ] && - (!rbuggyQSA || !rbuggyQSA.test( selector )) ) { - - if ( nodeType !== 1 ) { - newContext = context; - newSelector = selector; - - // qSA looks outside Element context, which is not what we want - // Thanks to Andrew Dupont for this workaround technique - // Support: IE <=8 - // Exclude object elements - } else if ( context.nodeName.toLowerCase() !== "object" ) { - - // Capture the context ID, setting it first if necessary - if ( (nid = context.getAttribute( "id" )) ) { - nid = nid.replace( rcssescape, fcssescape ); - } else { - context.setAttribute( "id", (nid = expando) ); - } - - // Prefix every selector in the list - groups = tokenize( selector ); - i = groups.length; - while ( i-- ) { - groups[i] = "#" + nid + " " + toSelector( groups[i] ); - } - newSelector = groups.join( "," ); - - // Expand context for sibling selectors - newContext = rsibling.test( selector ) && testContext( context.parentNode ) || - context; - } - - if ( newSelector ) { - try { - push.apply( results, - newContext.querySelectorAll( newSelector ) - ); - return results; - } catch ( qsaError ) { - } finally { - if ( nid === expando ) { - context.removeAttribute( "id" ); - } - } - } - } - } - } - - // All others - return select( selector.replace( rtrim, "$1" ), context, results, seed ); -} - -/** - * Create key-value caches of limited size - * @returns {function(string, object)} Returns the Object data after storing it on itself with - * property name the (space-suffixed) string and (if the cache is larger than Expr.cacheLength) - * deleting the oldest entry - */ -function createCache() { - var keys = []; - - function cache( key, value ) { - // Use (key + " ") to avoid collision with native prototype properties (see Issue #157) - if ( keys.push( key + " " ) > Expr.cacheLength ) { - // Only keep the most recent entries - delete cache[ keys.shift() ]; - } - return (cache[ key + " " ] = value); - } - return cache; -} - -/** - * Mark a function for special use by Sizzle - * @param {Function} fn The function to mark - */ -function markFunction( fn ) { - fn[ expando ] = true; - return fn; -} - -/** - * Support testing using an element - * @param {Function} fn Passed the created element and returns a boolean result - */ -function assert( fn ) { - var el = document.createElement("fieldset"); - - try { - return !!fn( el ); - } catch (e) { - return false; - } finally { - // Remove from its parent by default - if ( el.parentNode ) { - el.parentNode.removeChild( el ); - } - // release memory in IE - el = null; - } -} - -/** - * Adds the same handler for all of the specified attrs - * @param {String} attrs Pipe-separated list of attributes - * @param {Function} handler The method that will be applied - */ -function addHandle( attrs, handler ) { - var arr = attrs.split("|"), - i = arr.length; - - while ( i-- ) { - Expr.attrHandle[ arr[i] ] = handler; - } -} - -/** - * Checks document order of two siblings - * @param {Element} a - * @param {Element} b - * @returns {Number} Returns less than 0 if a precedes b, greater than 0 if a follows b - */ -function siblingCheck( a, b ) { - var cur = b && a, - diff = cur && a.nodeType === 1 && b.nodeType === 1 && - a.sourceIndex - b.sourceIndex; - - // Use IE sourceIndex if available on both nodes - if ( diff ) { - return diff; - } - - // Check if b follows a - if ( cur ) { - while ( (cur = cur.nextSibling) ) { - if ( cur === b ) { - return -1; - } - } - } - - return a ? 1 : -1; -} - -/** - * Returns a function to use in pseudos for input types - * @param {String} type - */ -function createInputPseudo( type ) { - return function( elem ) { - var name = elem.nodeName.toLowerCase(); - return name === "input" && elem.type === type; - }; -} - -/** - * Returns a function to use in pseudos for buttons - * @param {String} type - */ -function createButtonPseudo( type ) { - return function( elem ) { - var name = elem.nodeName.toLowerCase(); - return (name === "input" || name === "button") && elem.type === type; - }; -} - -/** - * Returns a function to use in pseudos for :enabled/:disabled - * @param {Boolean} disabled true for :disabled; false for :enabled - */ -function createDisabledPseudo( disabled ) { - - // Known :disabled false positives: fieldset[disabled] > legend:nth-of-type(n+2) :can-disable - return function( elem ) { - - // Only certain elements can match :enabled or :disabled - // https://html.spec.whatwg.org/multipage/scripting.html#selector-enabled - // https://html.spec.whatwg.org/multipage/scripting.html#selector-disabled - if ( "form" in elem ) { - - // Check for inherited disabledness on relevant non-disabled elements: - // * listed form-associated elements in a disabled fieldset - // https://html.spec.whatwg.org/multipage/forms.html#category-listed - // https://html.spec.whatwg.org/multipage/forms.html#concept-fe-disabled - // * option elements in a disabled optgroup - // https://html.spec.whatwg.org/multipage/forms.html#concept-option-disabled - // All such elements have a "form" property. - if ( elem.parentNode && elem.disabled === false ) { - - // Option elements defer to a parent optgroup if present - if ( "label" in elem ) { - if ( "label" in elem.parentNode ) { - return elem.parentNode.disabled === disabled; - } else { - return elem.disabled === disabled; - } - } - - // Support: IE 6 - 11 - // Use the isDisabled shortcut property to check for disabled fieldset ancestors - return elem.isDisabled === disabled || - - // Where there is no isDisabled, check manually - /* jshint -W018 */ - elem.isDisabled !== !disabled && - disabledAncestor( elem ) === disabled; - } - - return elem.disabled === disabled; - - // Try to winnow out elements that can't be disabled before trusting the disabled property. - // Some victims get caught in our net (label, legend, menu, track), but it shouldn't - // even exist on them, let alone have a boolean value. - } else if ( "label" in elem ) { - return elem.disabled === disabled; - } - - // Remaining elements are neither :enabled nor :disabled - return false; - }; -} - -/** - * Returns a function to use in pseudos for positionals - * @param {Function} fn - */ -function createPositionalPseudo( fn ) { - return markFunction(function( argument ) { - argument = +argument; - return markFunction(function( seed, matches ) { - var j, - matchIndexes = fn( [], seed.length, argument ), - i = matchIndexes.length; - - // Match elements found at the specified indexes - while ( i-- ) { - if ( seed[ (j = matchIndexes[i]) ] ) { - seed[j] = !(matches[j] = seed[j]); - } - } - }); - }); -} - -/** - * Checks a node for validity as a Sizzle context - * @param {Element|Object=} context - * @returns {Element|Object|Boolean} The input node if acceptable, otherwise a falsy value - */ -function testContext( context ) { - return context && typeof context.getElementsByTagName !== "undefined" && context; -} - -// Expose support vars for convenience -support = Sizzle.support = {}; - -/** - * Detects XML nodes - * @param {Element|Object} elem An element or a document - * @returns {Boolean} True iff elem is a non-HTML XML node - */ -isXML = Sizzle.isXML = function( elem ) { - // documentElement is verified for cases where it doesn't yet exist - // (such as loading iframes in IE - #4833) - var documentElement = elem && (elem.ownerDocument || elem).documentElement; - return documentElement ? documentElement.nodeName !== "HTML" : false; -}; - -/** - * Sets document-related variables once based on the current document - * @param {Element|Object} [doc] An element or document object to use to set the document - * @returns {Object} Returns the current document - */ -setDocument = Sizzle.setDocument = function( node ) { - var hasCompare, subWindow, - doc = node ? node.ownerDocument || node : preferredDoc; - - // Return early if doc is invalid or already selected - if ( doc === document || doc.nodeType !== 9 || !doc.documentElement ) { - return document; - } - - // Update global variables - document = doc; - docElem = document.documentElement; - documentIsHTML = !isXML( document ); - - // Support: IE 9-11, Edge - // Accessing iframe documents after unload throws "permission denied" errors (jQuery #13936) - if ( preferredDoc !== document && - (subWindow = document.defaultView) && subWindow.top !== subWindow ) { - - // Support: IE 11, Edge - if ( subWindow.addEventListener ) { - subWindow.addEventListener( "unload", unloadHandler, false ); - - // Support: IE 9 - 10 only - } else if ( subWindow.attachEvent ) { - subWindow.attachEvent( "onunload", unloadHandler ); - } - } - - /* Attributes - ---------------------------------------------------------------------- */ - - // Support: IE<8 - // Verify that getAttribute really returns attributes and not properties - // (excepting IE8 booleans) - support.attributes = assert(function( el ) { - el.className = "i"; - return !el.getAttribute("className"); - }); - - /* getElement(s)By* - ---------------------------------------------------------------------- */ - - // Check if getElementsByTagName("*") returns only elements - support.getElementsByTagName = assert(function( el ) { - el.appendChild( document.createComment("") ); - return !el.getElementsByTagName("*").length; - }); - - // Support: IE<9 - support.getElementsByClassName = rnative.test( document.getElementsByClassName ); - - // Support: IE<10 - // Check if getElementById returns elements by name - // The broken getElementById methods don't pick up programmatically-set names, - // so use a roundabout getElementsByName test - support.getById = assert(function( el ) { - docElem.appendChild( el ).id = expando; - return !document.getElementsByName || !document.getElementsByName( expando ).length; - }); - - // ID filter and find - if ( support.getById ) { - Expr.filter["ID"] = function( id ) { - var attrId = id.replace( runescape, funescape ); - return function( elem ) { - return elem.getAttribute("id") === attrId; - }; - }; - Expr.find["ID"] = function( id, context ) { - if ( typeof context.getElementById !== "undefined" && documentIsHTML ) { - var elem = context.getElementById( id ); - return elem ? [ elem ] : []; - } - }; - } else { - Expr.filter["ID"] = function( id ) { - var attrId = id.replace( runescape, funescape ); - return function( elem ) { - var node = typeof elem.getAttributeNode !== "undefined" && - elem.getAttributeNode("id"); - return node && node.value === attrId; - }; - }; - - // Support: IE 6 - 7 only - // getElementById is not reliable as a find shortcut - Expr.find["ID"] = function( id, context ) { - if ( typeof context.getElementById !== "undefined" && documentIsHTML ) { - var node, i, elems, - elem = context.getElementById( id ); - - if ( elem ) { - - // Verify the id attribute - node = elem.getAttributeNode("id"); - if ( node && node.value === id ) { - return [ elem ]; - } - - // Fall back on getElementsByName - elems = context.getElementsByName( id ); - i = 0; - while ( (elem = elems[i++]) ) { - node = elem.getAttributeNode("id"); - if ( node && node.value === id ) { - return [ elem ]; - } - } - } - - return []; - } - }; - } - - // Tag - Expr.find["TAG"] = support.getElementsByTagName ? - function( tag, context ) { - if ( typeof context.getElementsByTagName !== "undefined" ) { - return context.getElementsByTagName( tag ); - - // DocumentFragment nodes don't have gEBTN - } else if ( support.qsa ) { - return context.querySelectorAll( tag ); - } - } : - - function( tag, context ) { - var elem, - tmp = [], - i = 0, - // By happy coincidence, a (broken) gEBTN appears on DocumentFragment nodes too - results = context.getElementsByTagName( tag ); - - // Filter out possible comments - if ( tag === "*" ) { - while ( (elem = results[i++]) ) { - if ( elem.nodeType === 1 ) { - tmp.push( elem ); - } - } - - return tmp; - } - return results; - }; - - // Class - Expr.find["CLASS"] = support.getElementsByClassName && function( className, context ) { - if ( typeof context.getElementsByClassName !== "undefined" && documentIsHTML ) { - return context.getElementsByClassName( className ); - } - }; - - /* QSA/matchesSelector - ---------------------------------------------------------------------- */ - - // QSA and matchesSelector support - - // matchesSelector(:active) reports false when true (IE9/Opera 11.5) - rbuggyMatches = []; - - // qSa(:focus) reports false when true (Chrome 21) - // We allow this because of a bug in IE8/9 that throws an error - // whenever `document.activeElement` is accessed on an iframe - // So, we allow :focus to pass through QSA all the time to avoid the IE error - // See https://bugs.jquery.com/ticket/13378 - rbuggyQSA = []; - - if ( (support.qsa = rnative.test( document.querySelectorAll )) ) { - // Build QSA regex - // Regex strategy adopted from Diego Perini - assert(function( el ) { - // Select is set to empty string on purpose - // This is to test IE's treatment of not explicitly - // setting a boolean content attribute, - // since its presence should be enough - // https://bugs.jquery.com/ticket/12359 - docElem.appendChild( el ).innerHTML = "" + - ""; - - // Support: IE8, Opera 11-12.16 - // Nothing should be selected when empty strings follow ^= or $= or *= - // The test attribute must be unknown in Opera but "safe" for WinRT - // https://msdn.microsoft.com/en-us/library/ie/hh465388.aspx#attribute_section - if ( el.querySelectorAll("[msallowcapture^='']").length ) { - rbuggyQSA.push( "[*^$]=" + whitespace + "*(?:''|\"\")" ); - } - - // Support: IE8 - // Boolean attributes and "value" are not treated correctly - if ( !el.querySelectorAll("[selected]").length ) { - rbuggyQSA.push( "\\[" + whitespace + "*(?:value|" + booleans + ")" ); - } - - // Support: Chrome<29, Android<4.4, Safari<7.0+, iOS<7.0+, PhantomJS<1.9.8+ - if ( !el.querySelectorAll( "[id~=" + expando + "-]" ).length ) { - rbuggyQSA.push("~="); - } - - // Webkit/Opera - :checked should return selected option elements - // http://www.w3.org/TR/2011/REC-css3-selectors-20110929/#checked - // IE8 throws error here and will not see later tests - if ( !el.querySelectorAll(":checked").length ) { - rbuggyQSA.push(":checked"); - } - - // Support: Safari 8+, iOS 8+ - // https://bugs.webkit.org/show_bug.cgi?id=136851 - // In-page `selector#id sibling-combinator selector` fails - if ( !el.querySelectorAll( "a#" + expando + "+*" ).length ) { - rbuggyQSA.push(".#.+[+~]"); - } - }); - - assert(function( el ) { - el.innerHTML = "" + - ""; - - // Support: Windows 8 Native Apps - // The type and name attributes are restricted during .innerHTML assignment - var input = document.createElement("input"); - input.setAttribute( "type", "hidden" ); - el.appendChild( input ).setAttribute( "name", "D" ); - - // Support: IE8 - // Enforce case-sensitivity of name attribute - if ( el.querySelectorAll("[name=d]").length ) { - rbuggyQSA.push( "name" + whitespace + "*[*^$|!~]?=" ); - } - - // FF 3.5 - :enabled/:disabled and hidden elements (hidden elements are still enabled) - // IE8 throws error here and will not see later tests - if ( el.querySelectorAll(":enabled").length !== 2 ) { - rbuggyQSA.push( ":enabled", ":disabled" ); - } - - // Support: IE9-11+ - // IE's :disabled selector does not pick up the children of disabled fieldsets - docElem.appendChild( el ).disabled = true; - if ( el.querySelectorAll(":disabled").length !== 2 ) { - rbuggyQSA.push( ":enabled", ":disabled" ); - } - - // Opera 10-11 does not throw on post-comma invalid pseudos - el.querySelectorAll("*,:x"); - rbuggyQSA.push(",.*:"); - }); - } - - if ( (support.matchesSelector = rnative.test( (matches = docElem.matches || - docElem.webkitMatchesSelector || - docElem.mozMatchesSelector || - docElem.oMatchesSelector || - docElem.msMatchesSelector) )) ) { - - assert(function( el ) { - // Check to see if it's possible to do matchesSelector - // on a disconnected node (IE 9) - support.disconnectedMatch = matches.call( el, "*" ); - - // This should fail with an exception - // Gecko does not error, returns false instead - matches.call( el, "[s!='']:x" ); - rbuggyMatches.push( "!=", pseudos ); - }); - } - - rbuggyQSA = rbuggyQSA.length && new RegExp( rbuggyQSA.join("|") ); - rbuggyMatches = rbuggyMatches.length && new RegExp( rbuggyMatches.join("|") ); - - /* Contains - ---------------------------------------------------------------------- */ - hasCompare = rnative.test( docElem.compareDocumentPosition ); - - // Element contains another - // Purposefully self-exclusive - // As in, an element does not contain itself - contains = hasCompare || rnative.test( docElem.contains ) ? - function( a, b ) { - var adown = a.nodeType === 9 ? a.documentElement : a, - bup = b && b.parentNode; - return a === bup || !!( bup && bup.nodeType === 1 && ( - adown.contains ? - adown.contains( bup ) : - a.compareDocumentPosition && a.compareDocumentPosition( bup ) & 16 - )); - } : - function( a, b ) { - if ( b ) { - while ( (b = b.parentNode) ) { - if ( b === a ) { - return true; - } - } - } - return false; - }; - - /* Sorting - ---------------------------------------------------------------------- */ - - // Document order sorting - sortOrder = hasCompare ? - function( a, b ) { - - // Flag for duplicate removal - if ( a === b ) { - hasDuplicate = true; - return 0; - } - - // Sort on method existence if only one input has compareDocumentPosition - var compare = !a.compareDocumentPosition - !b.compareDocumentPosition; - if ( compare ) { - return compare; - } - - // Calculate position if both inputs belong to the same document - compare = ( a.ownerDocument || a ) === ( b.ownerDocument || b ) ? - a.compareDocumentPosition( b ) : - - // Otherwise we know they are disconnected - 1; - - // Disconnected nodes - if ( compare & 1 || - (!support.sortDetached && b.compareDocumentPosition( a ) === compare) ) { - - // Choose the first element that is related to our preferred document - if ( a === document || a.ownerDocument === preferredDoc && contains(preferredDoc, a) ) { - return -1; - } - if ( b === document || b.ownerDocument === preferredDoc && contains(preferredDoc, b) ) { - return 1; - } - - // Maintain original order - return sortInput ? - ( indexOf( sortInput, a ) - indexOf( sortInput, b ) ) : - 0; - } - - return compare & 4 ? -1 : 1; - } : - function( a, b ) { - // Exit early if the nodes are identical - if ( a === b ) { - hasDuplicate = true; - return 0; - } - - var cur, - i = 0, - aup = a.parentNode, - bup = b.parentNode, - ap = [ a ], - bp = [ b ]; - - // Parentless nodes are either documents or disconnected - if ( !aup || !bup ) { - return a === document ? -1 : - b === document ? 1 : - aup ? -1 : - bup ? 1 : - sortInput ? - ( indexOf( sortInput, a ) - indexOf( sortInput, b ) ) : - 0; - - // If the nodes are siblings, we can do a quick check - } else if ( aup === bup ) { - return siblingCheck( a, b ); - } - - // Otherwise we need full lists of their ancestors for comparison - cur = a; - while ( (cur = cur.parentNode) ) { - ap.unshift( cur ); - } - cur = b; - while ( (cur = cur.parentNode) ) { - bp.unshift( cur ); - } - - // Walk down the tree looking for a discrepancy - while ( ap[i] === bp[i] ) { - i++; - } - - return i ? - // Do a sibling check if the nodes have a common ancestor - siblingCheck( ap[i], bp[i] ) : - - // Otherwise nodes in our document sort first - ap[i] === preferredDoc ? -1 : - bp[i] === preferredDoc ? 1 : - 0; - }; - - return document; -}; - -Sizzle.matches = function( expr, elements ) { - return Sizzle( expr, null, null, elements ); -}; - -Sizzle.matchesSelector = function( elem, expr ) { - // Set document vars if needed - if ( ( elem.ownerDocument || elem ) !== document ) { - setDocument( elem ); - } - - // Make sure that attribute selectors are quoted - expr = expr.replace( rattributeQuotes, "='$1']" ); - - if ( support.matchesSelector && documentIsHTML && - !compilerCache[ expr + " " ] && - ( !rbuggyMatches || !rbuggyMatches.test( expr ) ) && - ( !rbuggyQSA || !rbuggyQSA.test( expr ) ) ) { - - try { - var ret = matches.call( elem, expr ); - - // IE 9's matchesSelector returns false on disconnected nodes - if ( ret || support.disconnectedMatch || - // As well, disconnected nodes are said to be in a document - // fragment in IE 9 - elem.document && elem.document.nodeType !== 11 ) { - return ret; - } - } catch (e) {} - } - - return Sizzle( expr, document, null, [ elem ] ).length > 0; -}; - -Sizzle.contains = function( context, elem ) { - // Set document vars if needed - if ( ( context.ownerDocument || context ) !== document ) { - setDocument( context ); - } - return contains( context, elem ); -}; - -Sizzle.attr = function( elem, name ) { - // Set document vars if needed - if ( ( elem.ownerDocument || elem ) !== document ) { - setDocument( elem ); - } - - var fn = Expr.attrHandle[ name.toLowerCase() ], - // Don't get fooled by Object.prototype properties (jQuery #13807) - val = fn && hasOwn.call( Expr.attrHandle, name.toLowerCase() ) ? - fn( elem, name, !documentIsHTML ) : - undefined; - - return val !== undefined ? - val : - support.attributes || !documentIsHTML ? - elem.getAttribute( name ) : - (val = elem.getAttributeNode(name)) && val.specified ? - val.value : - null; -}; - -Sizzle.escape = function( sel ) { - return (sel + "").replace( rcssescape, fcssescape ); -}; - -Sizzle.error = function( msg ) { - throw new Error( "Syntax error, unrecognized expression: " + msg ); -}; - -/** - * Document sorting and removing duplicates - * @param {ArrayLike} results - */ -Sizzle.uniqueSort = function( results ) { - var elem, - duplicates = [], - j = 0, - i = 0; - - // Unless we *know* we can detect duplicates, assume their presence - hasDuplicate = !support.detectDuplicates; - sortInput = !support.sortStable && results.slice( 0 ); - results.sort( sortOrder ); - - if ( hasDuplicate ) { - while ( (elem = results[i++]) ) { - if ( elem === results[ i ] ) { - j = duplicates.push( i ); - } - } - while ( j-- ) { - results.splice( duplicates[ j ], 1 ); - } - } - - // Clear input after sorting to release objects - // See https://github.com/jquery/sizzle/pull/225 - sortInput = null; - - return results; -}; - -/** - * Utility function for retrieving the text value of an array of DOM nodes - * @param {Array|Element} elem - */ -getText = Sizzle.getText = function( elem ) { - var node, - ret = "", - i = 0, - nodeType = elem.nodeType; - - if ( !nodeType ) { - // If no nodeType, this is expected to be an array - while ( (node = elem[i++]) ) { - // Do not traverse comment nodes - ret += getText( node ); - } - } else if ( nodeType === 1 || nodeType === 9 || nodeType === 11 ) { - // Use textContent for elements - // innerText usage removed for consistency of new lines (jQuery #11153) - if ( typeof elem.textContent === "string" ) { - return elem.textContent; - } else { - // Traverse its children - for ( elem = elem.firstChild; elem; elem = elem.nextSibling ) { - ret += getText( elem ); - } - } - } else if ( nodeType === 3 || nodeType === 4 ) { - return elem.nodeValue; - } - // Do not include comment or processing instruction nodes - - return ret; -}; - -Expr = Sizzle.selectors = { - - // Can be adjusted by the user - cacheLength: 50, - - createPseudo: markFunction, - - match: matchExpr, - - attrHandle: {}, - - find: {}, - - relative: { - ">": { dir: "parentNode", first: true }, - " ": { dir: "parentNode" }, - "+": { dir: "previousSibling", first: true }, - "~": { dir: "previousSibling" } - }, - - preFilter: { - "ATTR": function( match ) { - match[1] = match[1].replace( runescape, funescape ); - - // Move the given value to match[3] whether quoted or unquoted - match[3] = ( match[3] || match[4] || match[5] || "" ).replace( runescape, funescape ); - - if ( match[2] === "~=" ) { - match[3] = " " + match[3] + " "; - } - - return match.slice( 0, 4 ); - }, - - "CHILD": function( match ) { - /* matches from matchExpr["CHILD"] - 1 type (only|nth|...) - 2 what (child|of-type) - 3 argument (even|odd|\d*|\d*n([+-]\d+)?|...) - 4 xn-component of xn+y argument ([+-]?\d*n|) - 5 sign of xn-component - 6 x of xn-component - 7 sign of y-component - 8 y of y-component - */ - match[1] = match[1].toLowerCase(); - - if ( match[1].slice( 0, 3 ) === "nth" ) { - // nth-* requires argument - if ( !match[3] ) { - Sizzle.error( match[0] ); - } - - // numeric x and y parameters for Expr.filter.CHILD - // remember that false/true cast respectively to 0/1 - match[4] = +( match[4] ? match[5] + (match[6] || 1) : 2 * ( match[3] === "even" || match[3] === "odd" ) ); - match[5] = +( ( match[7] + match[8] ) || match[3] === "odd" ); - - // other types prohibit arguments - } else if ( match[3] ) { - Sizzle.error( match[0] ); - } - - return match; - }, - - "PSEUDO": function( match ) { - var excess, - unquoted = !match[6] && match[2]; - - if ( matchExpr["CHILD"].test( match[0] ) ) { - return null; - } - - // Accept quoted arguments as-is - if ( match[3] ) { - match[2] = match[4] || match[5] || ""; - - // Strip excess characters from unquoted arguments - } else if ( unquoted && rpseudo.test( unquoted ) && - // Get excess from tokenize (recursively) - (excess = tokenize( unquoted, true )) && - // advance to the next closing parenthesis - (excess = unquoted.indexOf( ")", unquoted.length - excess ) - unquoted.length) ) { - - // excess is a negative index - match[0] = match[0].slice( 0, excess ); - match[2] = unquoted.slice( 0, excess ); - } - - // Return only captures needed by the pseudo filter method (type and argument) - return match.slice( 0, 3 ); - } - }, - - filter: { - - "TAG": function( nodeNameSelector ) { - var nodeName = nodeNameSelector.replace( runescape, funescape ).toLowerCase(); - return nodeNameSelector === "*" ? - function() { return true; } : - function( elem ) { - return elem.nodeName && elem.nodeName.toLowerCase() === nodeName; - }; - }, - - "CLASS": function( className ) { - var pattern = classCache[ className + " " ]; - - return pattern || - (pattern = new RegExp( "(^|" + whitespace + ")" + className + "(" + whitespace + "|$)" )) && - classCache( className, function( elem ) { - return pattern.test( typeof elem.className === "string" && elem.className || typeof elem.getAttribute !== "undefined" && elem.getAttribute("class") || "" ); - }); - }, - - "ATTR": function( name, operator, check ) { - return function( elem ) { - var result = Sizzle.attr( elem, name ); - - if ( result == null ) { - return operator === "!="; - } - if ( !operator ) { - return true; - } - - result += ""; - - return operator === "=" ? result === check : - operator === "!=" ? result !== check : - operator === "^=" ? check && result.indexOf( check ) === 0 : - operator === "*=" ? check && result.indexOf( check ) > -1 : - operator === "$=" ? check && result.slice( -check.length ) === check : - operator === "~=" ? ( " " + result.replace( rwhitespace, " " ) + " " ).indexOf( check ) > -1 : - operator === "|=" ? result === check || result.slice( 0, check.length + 1 ) === check + "-" : - false; - }; - }, - - "CHILD": function( type, what, argument, first, last ) { - var simple = type.slice( 0, 3 ) !== "nth", - forward = type.slice( -4 ) !== "last", - ofType = what === "of-type"; - - return first === 1 && last === 0 ? - - // Shortcut for :nth-*(n) - function( elem ) { - return !!elem.parentNode; - } : - - function( elem, context, xml ) { - var cache, uniqueCache, outerCache, node, nodeIndex, start, - dir = simple !== forward ? "nextSibling" : "previousSibling", - parent = elem.parentNode, - name = ofType && elem.nodeName.toLowerCase(), - useCache = !xml && !ofType, - diff = false; - - if ( parent ) { - - // :(first|last|only)-(child|of-type) - if ( simple ) { - while ( dir ) { - node = elem; - while ( (node = node[ dir ]) ) { - if ( ofType ? - node.nodeName.toLowerCase() === name : - node.nodeType === 1 ) { - - return false; - } - } - // Reverse direction for :only-* (if we haven't yet done so) - start = dir = type === "only" && !start && "nextSibling"; - } - return true; - } - - start = [ forward ? parent.firstChild : parent.lastChild ]; - - // non-xml :nth-child(...) stores cache data on `parent` - if ( forward && useCache ) { - - // Seek `elem` from a previously-cached index - - // ...in a gzip-friendly way - node = parent; - outerCache = node[ expando ] || (node[ expando ] = {}); - - // Support: IE <9 only - // Defend against cloned attroperties (jQuery gh-1709) - uniqueCache = outerCache[ node.uniqueID ] || - (outerCache[ node.uniqueID ] = {}); - - cache = uniqueCache[ type ] || []; - nodeIndex = cache[ 0 ] === dirruns && cache[ 1 ]; - diff = nodeIndex && cache[ 2 ]; - node = nodeIndex && parent.childNodes[ nodeIndex ]; - - while ( (node = ++nodeIndex && node && node[ dir ] || - - // Fallback to seeking `elem` from the start - (diff = nodeIndex = 0) || start.pop()) ) { - - // When found, cache indexes on `parent` and break - if ( node.nodeType === 1 && ++diff && node === elem ) { - uniqueCache[ type ] = [ dirruns, nodeIndex, diff ]; - break; - } - } - - } else { - // Use previously-cached element index if available - if ( useCache ) { - // ...in a gzip-friendly way - node = elem; - outerCache = node[ expando ] || (node[ expando ] = {}); - - // Support: IE <9 only - // Defend against cloned attroperties (jQuery gh-1709) - uniqueCache = outerCache[ node.uniqueID ] || - (outerCache[ node.uniqueID ] = {}); - - cache = uniqueCache[ type ] || []; - nodeIndex = cache[ 0 ] === dirruns && cache[ 1 ]; - diff = nodeIndex; - } - - // xml :nth-child(...) - // or :nth-last-child(...) or :nth(-last)?-of-type(...) - if ( diff === false ) { - // Use the same loop as above to seek `elem` from the start - while ( (node = ++nodeIndex && node && node[ dir ] || - (diff = nodeIndex = 0) || start.pop()) ) { - - if ( ( ofType ? - node.nodeName.toLowerCase() === name : - node.nodeType === 1 ) && - ++diff ) { - - // Cache the index of each encountered element - if ( useCache ) { - outerCache = node[ expando ] || (node[ expando ] = {}); - - // Support: IE <9 only - // Defend against cloned attroperties (jQuery gh-1709) - uniqueCache = outerCache[ node.uniqueID ] || - (outerCache[ node.uniqueID ] = {}); - - uniqueCache[ type ] = [ dirruns, diff ]; - } - - if ( node === elem ) { - break; - } - } - } - } - } - - // Incorporate the offset, then check against cycle size - diff -= last; - return diff === first || ( diff % first === 0 && diff / first >= 0 ); - } - }; - }, - - "PSEUDO": function( pseudo, argument ) { - // pseudo-class names are case-insensitive - // http://www.w3.org/TR/selectors/#pseudo-classes - // Prioritize by case sensitivity in case custom pseudos are added with uppercase letters - // Remember that setFilters inherits from pseudos - var args, - fn = Expr.pseudos[ pseudo ] || Expr.setFilters[ pseudo.toLowerCase() ] || - Sizzle.error( "unsupported pseudo: " + pseudo ); - - // The user may use createPseudo to indicate that - // arguments are needed to create the filter function - // just as Sizzle does - if ( fn[ expando ] ) { - return fn( argument ); - } - - // But maintain support for old signatures - if ( fn.length > 1 ) { - args = [ pseudo, pseudo, "", argument ]; - return Expr.setFilters.hasOwnProperty( pseudo.toLowerCase() ) ? - markFunction(function( seed, matches ) { - var idx, - matched = fn( seed, argument ), - i = matched.length; - while ( i-- ) { - idx = indexOf( seed, matched[i] ); - seed[ idx ] = !( matches[ idx ] = matched[i] ); - } - }) : - function( elem ) { - return fn( elem, 0, args ); - }; - } - - return fn; - } - }, - - pseudos: { - // Potentially complex pseudos - "not": markFunction(function( selector ) { - // Trim the selector passed to compile - // to avoid treating leading and trailing - // spaces as combinators - var input = [], - results = [], - matcher = compile( selector.replace( rtrim, "$1" ) ); - - return matcher[ expando ] ? - markFunction(function( seed, matches, context, xml ) { - var elem, - unmatched = matcher( seed, null, xml, [] ), - i = seed.length; - - // Match elements unmatched by `matcher` - while ( i-- ) { - if ( (elem = unmatched[i]) ) { - seed[i] = !(matches[i] = elem); - } - } - }) : - function( elem, context, xml ) { - input[0] = elem; - matcher( input, null, xml, results ); - // Don't keep the element (issue #299) - input[0] = null; - return !results.pop(); - }; - }), - - "has": markFunction(function( selector ) { - return function( elem ) { - return Sizzle( selector, elem ).length > 0; - }; - }), - - "contains": markFunction(function( text ) { - text = text.replace( runescape, funescape ); - return function( elem ) { - return ( elem.textContent || elem.innerText || getText( elem ) ).indexOf( text ) > -1; - }; - }), - - // "Whether an element is represented by a :lang() selector - // is based solely on the element's language value - // being equal to the identifier C, - // or beginning with the identifier C immediately followed by "-". - // The matching of C against the element's language value is performed case-insensitively. - // The identifier C does not have to be a valid language name." - // http://www.w3.org/TR/selectors/#lang-pseudo - "lang": markFunction( function( lang ) { - // lang value must be a valid identifier - if ( !ridentifier.test(lang || "") ) { - Sizzle.error( "unsupported lang: " + lang ); - } - lang = lang.replace( runescape, funescape ).toLowerCase(); - return function( elem ) { - var elemLang; - do { - if ( (elemLang = documentIsHTML ? - elem.lang : - elem.getAttribute("xml:lang") || elem.getAttribute("lang")) ) { - - elemLang = elemLang.toLowerCase(); - return elemLang === lang || elemLang.indexOf( lang + "-" ) === 0; - } - } while ( (elem = elem.parentNode) && elem.nodeType === 1 ); - return false; - }; - }), - - // Miscellaneous - "target": function( elem ) { - var hash = window.location && window.location.hash; - return hash && hash.slice( 1 ) === elem.id; - }, - - "root": function( elem ) { - return elem === docElem; - }, - - "focus": function( elem ) { - return elem === document.activeElement && (!document.hasFocus || document.hasFocus()) && !!(elem.type || elem.href || ~elem.tabIndex); - }, - - // Boolean properties - "enabled": createDisabledPseudo( false ), - "disabled": createDisabledPseudo( true ), - - "checked": function( elem ) { - // In CSS3, :checked should return both checked and selected elements - // http://www.w3.org/TR/2011/REC-css3-selectors-20110929/#checked - var nodeName = elem.nodeName.toLowerCase(); - return (nodeName === "input" && !!elem.checked) || (nodeName === "option" && !!elem.selected); - }, - - "selected": function( elem ) { - // Accessing this property makes selected-by-default - // options in Safari work properly - if ( elem.parentNode ) { - elem.parentNode.selectedIndex; - } - - return elem.selected === true; - }, - - // Contents - "empty": function( elem ) { - // http://www.w3.org/TR/selectors/#empty-pseudo - // :empty is negated by element (1) or content nodes (text: 3; cdata: 4; entity ref: 5), - // but not by others (comment: 8; processing instruction: 7; etc.) - // nodeType < 6 works because attributes (2) do not appear as children - for ( elem = elem.firstChild; elem; elem = elem.nextSibling ) { - if ( elem.nodeType < 6 ) { - return false; - } - } - return true; - }, - - "parent": function( elem ) { - return !Expr.pseudos["empty"]( elem ); - }, - - // Element/input types - "header": function( elem ) { - return rheader.test( elem.nodeName ); - }, - - "input": function( elem ) { - return rinputs.test( elem.nodeName ); - }, - - "button": function( elem ) { - var name = elem.nodeName.toLowerCase(); - return name === "input" && elem.type === "button" || name === "button"; - }, - - "text": function( elem ) { - var attr; - return elem.nodeName.toLowerCase() === "input" && - elem.type === "text" && - - // Support: IE<8 - // New HTML5 attribute values (e.g., "search") appear with elem.type === "text" - ( (attr = elem.getAttribute("type")) == null || attr.toLowerCase() === "text" ); - }, - - // Position-in-collection - "first": createPositionalPseudo(function() { - return [ 0 ]; - }), - - "last": createPositionalPseudo(function( matchIndexes, length ) { - return [ length - 1 ]; - }), - - "eq": createPositionalPseudo(function( matchIndexes, length, argument ) { - return [ argument < 0 ? argument + length : argument ]; - }), - - "even": createPositionalPseudo(function( matchIndexes, length ) { - var i = 0; - for ( ; i < length; i += 2 ) { - matchIndexes.push( i ); - } - return matchIndexes; - }), - - "odd": createPositionalPseudo(function( matchIndexes, length ) { - var i = 1; - for ( ; i < length; i += 2 ) { - matchIndexes.push( i ); - } - return matchIndexes; - }), - - "lt": createPositionalPseudo(function( matchIndexes, length, argument ) { - var i = argument < 0 ? argument + length : argument; - for ( ; --i >= 0; ) { - matchIndexes.push( i ); - } - return matchIndexes; - }), - - "gt": createPositionalPseudo(function( matchIndexes, length, argument ) { - var i = argument < 0 ? argument + length : argument; - for ( ; ++i < length; ) { - matchIndexes.push( i ); - } - return matchIndexes; - }) - } -}; - -Expr.pseudos["nth"] = Expr.pseudos["eq"]; - -// Add button/input type pseudos -for ( i in { radio: true, checkbox: true, file: true, password: true, image: true } ) { - Expr.pseudos[ i ] = createInputPseudo( i ); -} -for ( i in { submit: true, reset: true } ) { - Expr.pseudos[ i ] = createButtonPseudo( i ); -} - -// Easy API for creating new setFilters -function setFilters() {} -setFilters.prototype = Expr.filters = Expr.pseudos; -Expr.setFilters = new setFilters(); - -tokenize = Sizzle.tokenize = function( selector, parseOnly ) { - var matched, match, tokens, type, - soFar, groups, preFilters, - cached = tokenCache[ selector + " " ]; - - if ( cached ) { - return parseOnly ? 0 : cached.slice( 0 ); - } - - soFar = selector; - groups = []; - preFilters = Expr.preFilter; - - while ( soFar ) { - - // Comma and first run - if ( !matched || (match = rcomma.exec( soFar )) ) { - if ( match ) { - // Don't consume trailing commas as valid - soFar = soFar.slice( match[0].length ) || soFar; - } - groups.push( (tokens = []) ); - } - - matched = false; - - // Combinators - if ( (match = rcombinators.exec( soFar )) ) { - matched = match.shift(); - tokens.push({ - value: matched, - // Cast descendant combinators to space - type: match[0].replace( rtrim, " " ) - }); - soFar = soFar.slice( matched.length ); - } - - // Filters - for ( type in Expr.filter ) { - if ( (match = matchExpr[ type ].exec( soFar )) && (!preFilters[ type ] || - (match = preFilters[ type ]( match ))) ) { - matched = match.shift(); - tokens.push({ - value: matched, - type: type, - matches: match - }); - soFar = soFar.slice( matched.length ); - } - } - - if ( !matched ) { - break; - } - } - - // Return the length of the invalid excess - // if we're just parsing - // Otherwise, throw an error or return tokens - return parseOnly ? - soFar.length : - soFar ? - Sizzle.error( selector ) : - // Cache the tokens - tokenCache( selector, groups ).slice( 0 ); -}; - -function toSelector( tokens ) { - var i = 0, - len = tokens.length, - selector = ""; - for ( ; i < len; i++ ) { - selector += tokens[i].value; - } - return selector; -} - -function addCombinator( matcher, combinator, base ) { - var dir = combinator.dir, - skip = combinator.next, - key = skip || dir, - checkNonElements = base && key === "parentNode", - doneName = done++; - - return combinator.first ? - // Check against closest ancestor/preceding element - function( elem, context, xml ) { - while ( (elem = elem[ dir ]) ) { - if ( elem.nodeType === 1 || checkNonElements ) { - return matcher( elem, context, xml ); - } - } - return false; - } : - - // Check against all ancestor/preceding elements - function( elem, context, xml ) { - var oldCache, uniqueCache, outerCache, - newCache = [ dirruns, doneName ]; - - // We can't set arbitrary data on XML nodes, so they don't benefit from combinator caching - if ( xml ) { - while ( (elem = elem[ dir ]) ) { - if ( elem.nodeType === 1 || checkNonElements ) { - if ( matcher( elem, context, xml ) ) { - return true; - } - } - } - } else { - while ( (elem = elem[ dir ]) ) { - if ( elem.nodeType === 1 || checkNonElements ) { - outerCache = elem[ expando ] || (elem[ expando ] = {}); - - // Support: IE <9 only - // Defend against cloned attroperties (jQuery gh-1709) - uniqueCache = outerCache[ elem.uniqueID ] || (outerCache[ elem.uniqueID ] = {}); - - if ( skip && skip === elem.nodeName.toLowerCase() ) { - elem = elem[ dir ] || elem; - } else if ( (oldCache = uniqueCache[ key ]) && - oldCache[ 0 ] === dirruns && oldCache[ 1 ] === doneName ) { - - // Assign to newCache so results back-propagate to previous elements - return (newCache[ 2 ] = oldCache[ 2 ]); - } else { - // Reuse newcache so results back-propagate to previous elements - uniqueCache[ key ] = newCache; - - // A match means we're done; a fail means we have to keep checking - if ( (newCache[ 2 ] = matcher( elem, context, xml )) ) { - return true; - } - } - } - } - } - return false; - }; -} - -function elementMatcher( matchers ) { - return matchers.length > 1 ? - function( elem, context, xml ) { - var i = matchers.length; - while ( i-- ) { - if ( !matchers[i]( elem, context, xml ) ) { - return false; - } - } - return true; - } : - matchers[0]; -} - -function multipleContexts( selector, contexts, results ) { - var i = 0, - len = contexts.length; - for ( ; i < len; i++ ) { - Sizzle( selector, contexts[i], results ); - } - return results; -} - -function condense( unmatched, map, filter, context, xml ) { - var elem, - newUnmatched = [], - i = 0, - len = unmatched.length, - mapped = map != null; - - for ( ; i < len; i++ ) { - if ( (elem = unmatched[i]) ) { - if ( !filter || filter( elem, context, xml ) ) { - newUnmatched.push( elem ); - if ( mapped ) { - map.push( i ); - } - } - } - } - - return newUnmatched; -} - -function setMatcher( preFilter, selector, matcher, postFilter, postFinder, postSelector ) { - if ( postFilter && !postFilter[ expando ] ) { - postFilter = setMatcher( postFilter ); - } - if ( postFinder && !postFinder[ expando ] ) { - postFinder = setMatcher( postFinder, postSelector ); - } - return markFunction(function( seed, results, context, xml ) { - var temp, i, elem, - preMap = [], - postMap = [], - preexisting = results.length, - - // Get initial elements from seed or context - elems = seed || multipleContexts( selector || "*", context.nodeType ? [ context ] : context, [] ), - - // Prefilter to get matcher input, preserving a map for seed-results synchronization - matcherIn = preFilter && ( seed || !selector ) ? - condense( elems, preMap, preFilter, context, xml ) : - elems, - - matcherOut = matcher ? - // If we have a postFinder, or filtered seed, or non-seed postFilter or preexisting results, - postFinder || ( seed ? preFilter : preexisting || postFilter ) ? - - // ...intermediate processing is necessary - [] : - - // ...otherwise use results directly - results : - matcherIn; - - // Find primary matches - if ( matcher ) { - matcher( matcherIn, matcherOut, context, xml ); - } - - // Apply postFilter - if ( postFilter ) { - temp = condense( matcherOut, postMap ); - postFilter( temp, [], context, xml ); - - // Un-match failing elements by moving them back to matcherIn - i = temp.length; - while ( i-- ) { - if ( (elem = temp[i]) ) { - matcherOut[ postMap[i] ] = !(matcherIn[ postMap[i] ] = elem); - } - } - } - - if ( seed ) { - if ( postFinder || preFilter ) { - if ( postFinder ) { - // Get the final matcherOut by condensing this intermediate into postFinder contexts - temp = []; - i = matcherOut.length; - while ( i-- ) { - if ( (elem = matcherOut[i]) ) { - // Restore matcherIn since elem is not yet a final match - temp.push( (matcherIn[i] = elem) ); - } - } - postFinder( null, (matcherOut = []), temp, xml ); - } - - // Move matched elements from seed to results to keep them synchronized - i = matcherOut.length; - while ( i-- ) { - if ( (elem = matcherOut[i]) && - (temp = postFinder ? indexOf( seed, elem ) : preMap[i]) > -1 ) { - - seed[temp] = !(results[temp] = elem); - } - } - } - - // Add elements to results, through postFinder if defined - } else { - matcherOut = condense( - matcherOut === results ? - matcherOut.splice( preexisting, matcherOut.length ) : - matcherOut - ); - if ( postFinder ) { - postFinder( null, results, matcherOut, xml ); - } else { - push.apply( results, matcherOut ); - } - } - }); -} - -function matcherFromTokens( tokens ) { - var checkContext, matcher, j, - len = tokens.length, - leadingRelative = Expr.relative[ tokens[0].type ], - implicitRelative = leadingRelative || Expr.relative[" "], - i = leadingRelative ? 1 : 0, - - // The foundational matcher ensures that elements are reachable from top-level context(s) - matchContext = addCombinator( function( elem ) { - return elem === checkContext; - }, implicitRelative, true ), - matchAnyContext = addCombinator( function( elem ) { - return indexOf( checkContext, elem ) > -1; - }, implicitRelative, true ), - matchers = [ function( elem, context, xml ) { - var ret = ( !leadingRelative && ( xml || context !== outermostContext ) ) || ( - (checkContext = context).nodeType ? - matchContext( elem, context, xml ) : - matchAnyContext( elem, context, xml ) ); - // Avoid hanging onto element (issue #299) - checkContext = null; - return ret; - } ]; - - for ( ; i < len; i++ ) { - if ( (matcher = Expr.relative[ tokens[i].type ]) ) { - matchers = [ addCombinator(elementMatcher( matchers ), matcher) ]; - } else { - matcher = Expr.filter[ tokens[i].type ].apply( null, tokens[i].matches ); - - // Return special upon seeing a positional matcher - if ( matcher[ expando ] ) { - // Find the next relative operator (if any) for proper handling - j = ++i; - for ( ; j < len; j++ ) { - if ( Expr.relative[ tokens[j].type ] ) { - break; - } - } - return setMatcher( - i > 1 && elementMatcher( matchers ), - i > 1 && toSelector( - // If the preceding token was a descendant combinator, insert an implicit any-element `*` - tokens.slice( 0, i - 1 ).concat({ value: tokens[ i - 2 ].type === " " ? "*" : "" }) - ).replace( rtrim, "$1" ), - matcher, - i < j && matcherFromTokens( tokens.slice( i, j ) ), - j < len && matcherFromTokens( (tokens = tokens.slice( j )) ), - j < len && toSelector( tokens ) - ); - } - matchers.push( matcher ); - } - } - - return elementMatcher( matchers ); -} - -function matcherFromGroupMatchers( elementMatchers, setMatchers ) { - var bySet = setMatchers.length > 0, - byElement = elementMatchers.length > 0, - superMatcher = function( seed, context, xml, results, outermost ) { - var elem, j, matcher, - matchedCount = 0, - i = "0", - unmatched = seed && [], - setMatched = [], - contextBackup = outermostContext, - // We must always have either seed elements or outermost context - elems = seed || byElement && Expr.find["TAG"]( "*", outermost ), - // Use integer dirruns iff this is the outermost matcher - dirrunsUnique = (dirruns += contextBackup == null ? 1 : Math.random() || 0.1), - len = elems.length; - - if ( outermost ) { - outermostContext = context === document || context || outermost; - } - - // Add elements passing elementMatchers directly to results - // Support: IE<9, Safari - // Tolerate NodeList properties (IE: "length"; Safari: ) matching elements by id - for ( ; i !== len && (elem = elems[i]) != null; i++ ) { - if ( byElement && elem ) { - j = 0; - if ( !context && elem.ownerDocument !== document ) { - setDocument( elem ); - xml = !documentIsHTML; - } - while ( (matcher = elementMatchers[j++]) ) { - if ( matcher( elem, context || document, xml) ) { - results.push( elem ); - break; - } - } - if ( outermost ) { - dirruns = dirrunsUnique; - } - } - - // Track unmatched elements for set filters - if ( bySet ) { - // They will have gone through all possible matchers - if ( (elem = !matcher && elem) ) { - matchedCount--; - } - - // Lengthen the array for every element, matched or not - if ( seed ) { - unmatched.push( elem ); - } - } - } - - // `i` is now the count of elements visited above, and adding it to `matchedCount` - // makes the latter nonnegative. - matchedCount += i; - - // Apply set filters to unmatched elements - // NOTE: This can be skipped if there are no unmatched elements (i.e., `matchedCount` - // equals `i`), unless we didn't visit _any_ elements in the above loop because we have - // no element matchers and no seed. - // Incrementing an initially-string "0" `i` allows `i` to remain a string only in that - // case, which will result in a "00" `matchedCount` that differs from `i` but is also - // numerically zero. - if ( bySet && i !== matchedCount ) { - j = 0; - while ( (matcher = setMatchers[j++]) ) { - matcher( unmatched, setMatched, context, xml ); - } - - if ( seed ) { - // Reintegrate element matches to eliminate the need for sorting - if ( matchedCount > 0 ) { - while ( i-- ) { - if ( !(unmatched[i] || setMatched[i]) ) { - setMatched[i] = pop.call( results ); - } - } - } - - // Discard index placeholder values to get only actual matches - setMatched = condense( setMatched ); - } - - // Add matches to results - push.apply( results, setMatched ); - - // Seedless set matches succeeding multiple successful matchers stipulate sorting - if ( outermost && !seed && setMatched.length > 0 && - ( matchedCount + setMatchers.length ) > 1 ) { - - Sizzle.uniqueSort( results ); - } - } - - // Override manipulation of globals by nested matchers - if ( outermost ) { - dirruns = dirrunsUnique; - outermostContext = contextBackup; - } - - return unmatched; - }; - - return bySet ? - markFunction( superMatcher ) : - superMatcher; -} - -compile = Sizzle.compile = function( selector, match /* Internal Use Only */ ) { - var i, - setMatchers = [], - elementMatchers = [], - cached = compilerCache[ selector + " " ]; - - if ( !cached ) { - // Generate a function of recursive functions that can be used to check each element - if ( !match ) { - match = tokenize( selector ); - } - i = match.length; - while ( i-- ) { - cached = matcherFromTokens( match[i] ); - if ( cached[ expando ] ) { - setMatchers.push( cached ); - } else { - elementMatchers.push( cached ); - } - } - - // Cache the compiled function - cached = compilerCache( selector, matcherFromGroupMatchers( elementMatchers, setMatchers ) ); - - // Save selector and tokenization - cached.selector = selector; - } - return cached; -}; - -/** - * A low-level selection function that works with Sizzle's compiled - * selector functions - * @param {String|Function} selector A selector or a pre-compiled - * selector function built with Sizzle.compile - * @param {Element} context - * @param {Array} [results] - * @param {Array} [seed] A set of elements to match against - */ -select = Sizzle.select = function( selector, context, results, seed ) { - var i, tokens, token, type, find, - compiled = typeof selector === "function" && selector, - match = !seed && tokenize( (selector = compiled.selector || selector) ); - - results = results || []; - - // Try to minimize operations if there is only one selector in the list and no seed - // (the latter of which guarantees us context) - if ( match.length === 1 ) { - - // Reduce context if the leading compound selector is an ID - tokens = match[0] = match[0].slice( 0 ); - if ( tokens.length > 2 && (token = tokens[0]).type === "ID" && - context.nodeType === 9 && documentIsHTML && Expr.relative[ tokens[1].type ] ) { - - context = ( Expr.find["ID"]( token.matches[0].replace(runescape, funescape), context ) || [] )[0]; - if ( !context ) { - return results; - - // Precompiled matchers will still verify ancestry, so step up a level - } else if ( compiled ) { - context = context.parentNode; - } - - selector = selector.slice( tokens.shift().value.length ); - } - - // Fetch a seed set for right-to-left matching - i = matchExpr["needsContext"].test( selector ) ? 0 : tokens.length; - while ( i-- ) { - token = tokens[i]; - - // Abort if we hit a combinator - if ( Expr.relative[ (type = token.type) ] ) { - break; - } - if ( (find = Expr.find[ type ]) ) { - // Search, expanding context for leading sibling combinators - if ( (seed = find( - token.matches[0].replace( runescape, funescape ), - rsibling.test( tokens[0].type ) && testContext( context.parentNode ) || context - )) ) { - - // If seed is empty or no tokens remain, we can return early - tokens.splice( i, 1 ); - selector = seed.length && toSelector( tokens ); - if ( !selector ) { - push.apply( results, seed ); - return results; - } - - break; - } - } - } - } - - // Compile and execute a filtering function if one is not provided - // Provide `match` to avoid retokenization if we modified the selector above - ( compiled || compile( selector, match ) )( - seed, - context, - !documentIsHTML, - results, - !context || rsibling.test( selector ) && testContext( context.parentNode ) || context - ); - return results; -}; - -// One-time assignments - -// Sort stability -support.sortStable = expando.split("").sort( sortOrder ).join("") === expando; - -// Support: Chrome 14-35+ -// Always assume duplicates if they aren't passed to the comparison function -support.detectDuplicates = !!hasDuplicate; - -// Initialize against the default document -setDocument(); - -// Support: Webkit<537.32 - Safari 6.0.3/Chrome 25 (fixed in Chrome 27) -// Detached nodes confoundingly follow *each other* -support.sortDetached = assert(function( el ) { - // Should return 1, but returns 4 (following) - return el.compareDocumentPosition( document.createElement("fieldset") ) & 1; -}); - -// Support: IE<8 -// Prevent attribute/property "interpolation" -// https://msdn.microsoft.com/en-us/library/ms536429%28VS.85%29.aspx -if ( !assert(function( el ) { - el.innerHTML = ""; - return el.firstChild.getAttribute("href") === "#" ; -}) ) { - addHandle( "type|href|height|width", function( elem, name, isXML ) { - if ( !isXML ) { - return elem.getAttribute( name, name.toLowerCase() === "type" ? 1 : 2 ); - } - }); -} - -// Support: IE<9 -// Use defaultValue in place of getAttribute("value") -if ( !support.attributes || !assert(function( el ) { - el.innerHTML = ""; - el.firstChild.setAttribute( "value", "" ); - return el.firstChild.getAttribute( "value" ) === ""; -}) ) { - addHandle( "value", function( elem, name, isXML ) { - if ( !isXML && elem.nodeName.toLowerCase() === "input" ) { - return elem.defaultValue; - } - }); -} - -// Support: IE<9 -// Use getAttributeNode to fetch booleans when getAttribute lies -if ( !assert(function( el ) { - return el.getAttribute("disabled") == null; -}) ) { - addHandle( booleans, function( elem, name, isXML ) { - var val; - if ( !isXML ) { - return elem[ name ] === true ? name.toLowerCase() : - (val = elem.getAttributeNode( name )) && val.specified ? - val.value : - null; - } - }); -} - -return Sizzle; - -})( window ); - - - -jQuery.find = Sizzle; -jQuery.expr = Sizzle.selectors; - -// Deprecated -jQuery.expr[ ":" ] = jQuery.expr.pseudos; -jQuery.uniqueSort = jQuery.unique = Sizzle.uniqueSort; -jQuery.text = Sizzle.getText; -jQuery.isXMLDoc = Sizzle.isXML; -jQuery.contains = Sizzle.contains; -jQuery.escapeSelector = Sizzle.escape; - - - - -var dir = function( elem, dir, until ) { - var matched = [], - truncate = until !== undefined; - - while ( ( elem = elem[ dir ] ) && elem.nodeType !== 9 ) { - if ( elem.nodeType === 1 ) { - if ( truncate && jQuery( elem ).is( until ) ) { - break; - } - matched.push( elem ); - } - } - return matched; -}; - - -var siblings = function( n, elem ) { - var matched = []; - - for ( ; n; n = n.nextSibling ) { - if ( n.nodeType === 1 && n !== elem ) { - matched.push( n ); - } - } - - return matched; -}; - - -var rneedsContext = jQuery.expr.match.needsContext; - - - -function nodeName( elem, name ) { - - return elem.nodeName && elem.nodeName.toLowerCase() === name.toLowerCase(); - -}; -var rsingleTag = ( /^<([a-z][^\/\0>:\x20\t\r\n\f]*)[\x20\t\r\n\f]*\/?>(?:<\/\1>|)$/i ); - - - -var risSimple = /^.[^:#\[\.,]*$/; - -// Implement the identical functionality for filter and not -function winnow( elements, qualifier, not ) { - if ( jQuery.isFunction( qualifier ) ) { - return jQuery.grep( elements, function( elem, i ) { - return !!qualifier.call( elem, i, elem ) !== not; - } ); - } - - // Single element - if ( qualifier.nodeType ) { - return jQuery.grep( elements, function( elem ) { - return ( elem === qualifier ) !== not; - } ); - } - - // Arraylike of elements (jQuery, arguments, Array) - if ( typeof qualifier !== "string" ) { - return jQuery.grep( elements, function( elem ) { - return ( indexOf.call( qualifier, elem ) > -1 ) !== not; - } ); - } - - // Simple selector that can be filtered directly, removing non-Elements - if ( risSimple.test( qualifier ) ) { - return jQuery.filter( qualifier, elements, not ); - } - - // Complex selector, compare the two sets, removing non-Elements - qualifier = jQuery.filter( qualifier, elements ); - return jQuery.grep( elements, function( elem ) { - return ( indexOf.call( qualifier, elem ) > -1 ) !== not && elem.nodeType === 1; - } ); -} - -jQuery.filter = function( expr, elems, not ) { - var elem = elems[ 0 ]; - - if ( not ) { - expr = ":not(" + expr + ")"; - } - - if ( elems.length === 1 && elem.nodeType === 1 ) { - return jQuery.find.matchesSelector( elem, expr ) ? [ elem ] : []; - } - - return jQuery.find.matches( expr, jQuery.grep( elems, function( elem ) { - return elem.nodeType === 1; - } ) ); -}; - -jQuery.fn.extend( { - find: function( selector ) { - var i, ret, - len = this.length, - self = this; - - if ( typeof selector !== "string" ) { - return this.pushStack( jQuery( selector ).filter( function() { - for ( i = 0; i < len; i++ ) { - if ( jQuery.contains( self[ i ], this ) ) { - return true; - } - } - } ) ); - } - - ret = this.pushStack( [] ); - - for ( i = 0; i < len; i++ ) { - jQuery.find( selector, self[ i ], ret ); - } - - return len > 1 ? jQuery.uniqueSort( ret ) : ret; - }, - filter: function( selector ) { - return this.pushStack( winnow( this, selector || [], false ) ); - }, - not: function( selector ) { - return this.pushStack( winnow( this, selector || [], true ) ); - }, - is: function( selector ) { - return !!winnow( - this, - - // If this is a positional/relative selector, check membership in the returned set - // so $("p:first").is("p:last") won't return true for a doc with two "p". - typeof selector === "string" && rneedsContext.test( selector ) ? - jQuery( selector ) : - selector || [], - false - ).length; - } -} ); - - -// Initialize a jQuery object - - -// A central reference to the root jQuery(document) -var rootjQuery, - - // A simple way to check for HTML strings - // Prioritize #id over to avoid XSS via location.hash (#9521) - // Strict HTML recognition (#11290: must start with <) - // Shortcut simple #id case for speed - rquickExpr = /^(?:\s*(<[\w\W]+>)[^>]*|#([\w-]+))$/, - - init = jQuery.fn.init = function( selector, context, root ) { - var match, elem; - - // HANDLE: $(""), $(null), $(undefined), $(false) - if ( !selector ) { - return this; - } - - // Method init() accepts an alternate rootjQuery - // so migrate can support jQuery.sub (gh-2101) - root = root || rootjQuery; - - // Handle HTML strings - if ( typeof selector === "string" ) { - if ( selector[ 0 ] === "<" && - selector[ selector.length - 1 ] === ">" && - selector.length >= 3 ) { - - // Assume that strings that start and end with <> are HTML and skip the regex check - match = [ null, selector, null ]; - - } else { - match = rquickExpr.exec( selector ); - } - - // Match html or make sure no context is specified for #id - if ( match && ( match[ 1 ] || !context ) ) { - - // HANDLE: $(html) -> $(array) - if ( match[ 1 ] ) { - context = context instanceof jQuery ? context[ 0 ] : context; - - // Option to run scripts is true for back-compat - // Intentionally let the error be thrown if parseHTML is not present - jQuery.merge( this, jQuery.parseHTML( - match[ 1 ], - context && context.nodeType ? context.ownerDocument || context : document, - true - ) ); - - // HANDLE: $(html, props) - if ( rsingleTag.test( match[ 1 ] ) && jQuery.isPlainObject( context ) ) { - for ( match in context ) { - - // Properties of context are called as methods if possible - if ( jQuery.isFunction( this[ match ] ) ) { - this[ match ]( context[ match ] ); - - // ...and otherwise set as attributes - } else { - this.attr( match, context[ match ] ); - } - } - } - - return this; - - // HANDLE: $(#id) - } else { - elem = document.getElementById( match[ 2 ] ); - - if ( elem ) { - - // Inject the element directly into the jQuery object - this[ 0 ] = elem; - this.length = 1; - } - return this; - } - - // HANDLE: $(expr, $(...)) - } else if ( !context || context.jquery ) { - return ( context || root ).find( selector ); - - // HANDLE: $(expr, context) - // (which is just equivalent to: $(context).find(expr) - } else { - return this.constructor( context ).find( selector ); - } - - // HANDLE: $(DOMElement) - } else if ( selector.nodeType ) { - this[ 0 ] = selector; - this.length = 1; - return this; - - // HANDLE: $(function) - // Shortcut for document ready - } else if ( jQuery.isFunction( selector ) ) { - return root.ready !== undefined ? - root.ready( selector ) : - - // Execute immediately if ready is not present - selector( jQuery ); - } - - return jQuery.makeArray( selector, this ); - }; - -// Give the init function the jQuery prototype for later instantiation -init.prototype = jQuery.fn; - -// Initialize central reference -rootjQuery = jQuery( document ); - - -var rparentsprev = /^(?:parents|prev(?:Until|All))/, - - // Methods guaranteed to produce a unique set when starting from a unique set - guaranteedUnique = { - children: true, - contents: true, - next: true, - prev: true - }; - -jQuery.fn.extend( { - has: function( target ) { - var targets = jQuery( target, this ), - l = targets.length; - - return this.filter( function() { - var i = 0; - for ( ; i < l; i++ ) { - if ( jQuery.contains( this, targets[ i ] ) ) { - return true; - } - } - } ); - }, - - closest: function( selectors, context ) { - var cur, - i = 0, - l = this.length, - matched = [], - targets = typeof selectors !== "string" && jQuery( selectors ); - - // Positional selectors never match, since there's no _selection_ context - if ( !rneedsContext.test( selectors ) ) { - for ( ; i < l; i++ ) { - for ( cur = this[ i ]; cur && cur !== context; cur = cur.parentNode ) { - - // Always skip document fragments - if ( cur.nodeType < 11 && ( targets ? - targets.index( cur ) > -1 : - - // Don't pass non-elements to Sizzle - cur.nodeType === 1 && - jQuery.find.matchesSelector( cur, selectors ) ) ) { - - matched.push( cur ); - break; - } - } - } - } - - return this.pushStack( matched.length > 1 ? jQuery.uniqueSort( matched ) : matched ); - }, - - // Determine the position of an element within the set - index: function( elem ) { - - // No argument, return index in parent - if ( !elem ) { - return ( this[ 0 ] && this[ 0 ].parentNode ) ? this.first().prevAll().length : -1; - } - - // Index in selector - if ( typeof elem === "string" ) { - return indexOf.call( jQuery( elem ), this[ 0 ] ); - } - - // Locate the position of the desired element - return indexOf.call( this, - - // If it receives a jQuery object, the first element is used - elem.jquery ? elem[ 0 ] : elem - ); - }, - - add: function( selector, context ) { - return this.pushStack( - jQuery.uniqueSort( - jQuery.merge( this.get(), jQuery( selector, context ) ) - ) - ); - }, - - addBack: function( selector ) { - return this.add( selector == null ? - this.prevObject : this.prevObject.filter( selector ) - ); - } -} ); - -function sibling( cur, dir ) { - while ( ( cur = cur[ dir ] ) && cur.nodeType !== 1 ) {} - return cur; -} - -jQuery.each( { - parent: function( elem ) { - var parent = elem.parentNode; - return parent && parent.nodeType !== 11 ? parent : null; - }, - parents: function( elem ) { - return dir( elem, "parentNode" ); - }, - parentsUntil: function( elem, i, until ) { - return dir( elem, "parentNode", until ); - }, - next: function( elem ) { - return sibling( elem, "nextSibling" ); - }, - prev: function( elem ) { - return sibling( elem, "previousSibling" ); - }, - nextAll: function( elem ) { - return dir( elem, "nextSibling" ); - }, - prevAll: function( elem ) { - return dir( elem, "previousSibling" ); - }, - nextUntil: function( elem, i, until ) { - return dir( elem, "nextSibling", until ); - }, - prevUntil: function( elem, i, until ) { - return dir( elem, "previousSibling", until ); - }, - siblings: function( elem ) { - return siblings( ( elem.parentNode || {} ).firstChild, elem ); - }, - children: function( elem ) { - return siblings( elem.firstChild ); - }, - contents: function( elem ) { - if ( nodeName( elem, "iframe" ) ) { - return elem.contentDocument; - } - - // Support: IE 9 - 11 only, iOS 7 only, Android Browser <=4.3 only - // Treat the template element as a regular one in browsers that - // don't support it. - if ( nodeName( elem, "template" ) ) { - elem = elem.content || elem; - } - - return jQuery.merge( [], elem.childNodes ); - } -}, function( name, fn ) { - jQuery.fn[ name ] = function( until, selector ) { - var matched = jQuery.map( this, fn, until ); - - if ( name.slice( -5 ) !== "Until" ) { - selector = until; - } - - if ( selector && typeof selector === "string" ) { - matched = jQuery.filter( selector, matched ); - } - - if ( this.length > 1 ) { - - // Remove duplicates - if ( !guaranteedUnique[ name ] ) { - jQuery.uniqueSort( matched ); - } - - // Reverse order for parents* and prev-derivatives - if ( rparentsprev.test( name ) ) { - matched.reverse(); - } - } - - return this.pushStack( matched ); - }; -} ); -var rnothtmlwhite = ( /[^\x20\t\r\n\f]+/g ); - - - -// Convert String-formatted options into Object-formatted ones -function createOptions( options ) { - var object = {}; - jQuery.each( options.match( rnothtmlwhite ) || [], function( _, flag ) { - object[ flag ] = true; - } ); - return object; -} - -/* - * Create a callback list using the following parameters: - * - * options: an optional list of space-separated options that will change how - * the callback list behaves or a more traditional option object - * - * By default a callback list will act like an event callback list and can be - * "fired" multiple times. - * - * Possible options: - * - * once: will ensure the callback list can only be fired once (like a Deferred) - * - * memory: will keep track of previous values and will call any callback added - * after the list has been fired right away with the latest "memorized" - * values (like a Deferred) - * - * unique: will ensure a callback can only be added once (no duplicate in the list) - * - * stopOnFalse: interrupt callings when a callback returns false - * - */ -jQuery.Callbacks = function( options ) { - - // Convert options from String-formatted to Object-formatted if needed - // (we check in cache first) - options = typeof options === "string" ? - createOptions( options ) : - jQuery.extend( {}, options ); - - var // Flag to know if list is currently firing - firing, - - // Last fire value for non-forgettable lists - memory, - - // Flag to know if list was already fired - fired, - - // Flag to prevent firing - locked, - - // Actual callback list - list = [], - - // Queue of execution data for repeatable lists - queue = [], - - // Index of currently firing callback (modified by add/remove as needed) - firingIndex = -1, - - // Fire callbacks - fire = function() { - - // Enforce single-firing - locked = locked || options.once; - - // Execute callbacks for all pending executions, - // respecting firingIndex overrides and runtime changes - fired = firing = true; - for ( ; queue.length; firingIndex = -1 ) { - memory = queue.shift(); - while ( ++firingIndex < list.length ) { - - // Run callback and check for early termination - if ( list[ firingIndex ].apply( memory[ 0 ], memory[ 1 ] ) === false && - options.stopOnFalse ) { - - // Jump to end and forget the data so .add doesn't re-fire - firingIndex = list.length; - memory = false; - } - } - } - - // Forget the data if we're done with it - if ( !options.memory ) { - memory = false; - } - - firing = false; - - // Clean up if we're done firing for good - if ( locked ) { - - // Keep an empty list if we have data for future add calls - if ( memory ) { - list = []; - - // Otherwise, this object is spent - } else { - list = ""; - } - } - }, - - // Actual Callbacks object - self = { - - // Add a callback or a collection of callbacks to the list - add: function() { - if ( list ) { - - // If we have memory from a past run, we should fire after adding - if ( memory && !firing ) { - firingIndex = list.length - 1; - queue.push( memory ); - } - - ( function add( args ) { - jQuery.each( args, function( _, arg ) { - if ( jQuery.isFunction( arg ) ) { - if ( !options.unique || !self.has( arg ) ) { - list.push( arg ); - } - } else if ( arg && arg.length && jQuery.type( arg ) !== "string" ) { - - // Inspect recursively - add( arg ); - } - } ); - } )( arguments ); - - if ( memory && !firing ) { - fire(); - } - } - return this; - }, - - // Remove a callback from the list - remove: function() { - jQuery.each( arguments, function( _, arg ) { - var index; - while ( ( index = jQuery.inArray( arg, list, index ) ) > -1 ) { - list.splice( index, 1 ); - - // Handle firing indexes - if ( index <= firingIndex ) { - firingIndex--; - } - } - } ); - return this; - }, - - // Check if a given callback is in the list. - // If no argument is given, return whether or not list has callbacks attached. - has: function( fn ) { - return fn ? - jQuery.inArray( fn, list ) > -1 : - list.length > 0; - }, - - // Remove all callbacks from the list - empty: function() { - if ( list ) { - list = []; - } - return this; - }, - - // Disable .fire and .add - // Abort any current/pending executions - // Clear all callbacks and values - disable: function() { - locked = queue = []; - list = memory = ""; - return this; - }, - disabled: function() { - return !list; - }, - - // Disable .fire - // Also disable .add unless we have memory (since it would have no effect) - // Abort any pending executions - lock: function() { - locked = queue = []; - if ( !memory && !firing ) { - list = memory = ""; - } - return this; - }, - locked: function() { - return !!locked; - }, - - // Call all callbacks with the given context and arguments - fireWith: function( context, args ) { - if ( !locked ) { - args = args || []; - args = [ context, args.slice ? args.slice() : args ]; - queue.push( args ); - if ( !firing ) { - fire(); - } - } - return this; - }, - - // Call all the callbacks with the given arguments - fire: function() { - self.fireWith( this, arguments ); - return this; - }, - - // To know if the callbacks have already been called at least once - fired: function() { - return !!fired; - } - }; - - return self; -}; - - -function Identity( v ) { - return v; -} -function Thrower( ex ) { - throw ex; -} - -function adoptValue( value, resolve, reject, noValue ) { - var method; - - try { - - // Check for promise aspect first to privilege synchronous behavior - if ( value && jQuery.isFunction( ( method = value.promise ) ) ) { - method.call( value ).done( resolve ).fail( reject ); - - // Other thenables - } else if ( value && jQuery.isFunction( ( method = value.then ) ) ) { - method.call( value, resolve, reject ); - - // Other non-thenables - } else { - - // Control `resolve` arguments by letting Array#slice cast boolean `noValue` to integer: - // * false: [ value ].slice( 0 ) => resolve( value ) - // * true: [ value ].slice( 1 ) => resolve() - resolve.apply( undefined, [ value ].slice( noValue ) ); - } - - // For Promises/A+, convert exceptions into rejections - // Since jQuery.when doesn't unwrap thenables, we can skip the extra checks appearing in - // Deferred#then to conditionally suppress rejection. - } catch ( value ) { - - // Support: Android 4.0 only - // Strict mode functions invoked without .call/.apply get global-object context - reject.apply( undefined, [ value ] ); - } -} - -jQuery.extend( { - - Deferred: function( func ) { - var tuples = [ - - // action, add listener, callbacks, - // ... .then handlers, argument index, [final state] - [ "notify", "progress", jQuery.Callbacks( "memory" ), - jQuery.Callbacks( "memory" ), 2 ], - [ "resolve", "done", jQuery.Callbacks( "once memory" ), - jQuery.Callbacks( "once memory" ), 0, "resolved" ], - [ "reject", "fail", jQuery.Callbacks( "once memory" ), - jQuery.Callbacks( "once memory" ), 1, "rejected" ] - ], - state = "pending", - promise = { - state: function() { - return state; - }, - always: function() { - deferred.done( arguments ).fail( arguments ); - return this; - }, - "catch": function( fn ) { - return promise.then( null, fn ); - }, - - // Keep pipe for back-compat - pipe: function( /* fnDone, fnFail, fnProgress */ ) { - var fns = arguments; - - return jQuery.Deferred( function( newDefer ) { - jQuery.each( tuples, function( i, tuple ) { - - // Map tuples (progress, done, fail) to arguments (done, fail, progress) - var fn = jQuery.isFunction( fns[ tuple[ 4 ] ] ) && fns[ tuple[ 4 ] ]; - - // deferred.progress(function() { bind to newDefer or newDefer.notify }) - // deferred.done(function() { bind to newDefer or newDefer.resolve }) - // deferred.fail(function() { bind to newDefer or newDefer.reject }) - deferred[ tuple[ 1 ] ]( function() { - var returned = fn && fn.apply( this, arguments ); - if ( returned && jQuery.isFunction( returned.promise ) ) { - returned.promise() - .progress( newDefer.notify ) - .done( newDefer.resolve ) - .fail( newDefer.reject ); - } else { - newDefer[ tuple[ 0 ] + "With" ]( - this, - fn ? [ returned ] : arguments - ); - } - } ); - } ); - fns = null; - } ).promise(); - }, - then: function( onFulfilled, onRejected, onProgress ) { - var maxDepth = 0; - function resolve( depth, deferred, handler, special ) { - return function() { - var that = this, - args = arguments, - mightThrow = function() { - var returned, then; - - // Support: Promises/A+ section 2.3.3.3.3 - // https://promisesaplus.com/#point-59 - // Ignore double-resolution attempts - if ( depth < maxDepth ) { - return; - } - - returned = handler.apply( that, args ); - - // Support: Promises/A+ section 2.3.1 - // https://promisesaplus.com/#point-48 - if ( returned === deferred.promise() ) { - throw new TypeError( "Thenable self-resolution" ); - } - - // Support: Promises/A+ sections 2.3.3.1, 3.5 - // https://promisesaplus.com/#point-54 - // https://promisesaplus.com/#point-75 - // Retrieve `then` only once - then = returned && - - // Support: Promises/A+ section 2.3.4 - // https://promisesaplus.com/#point-64 - // Only check objects and functions for thenability - ( typeof returned === "object" || - typeof returned === "function" ) && - returned.then; - - // Handle a returned thenable - if ( jQuery.isFunction( then ) ) { - - // Special processors (notify) just wait for resolution - if ( special ) { - then.call( - returned, - resolve( maxDepth, deferred, Identity, special ), - resolve( maxDepth, deferred, Thrower, special ) - ); - - // Normal processors (resolve) also hook into progress - } else { - - // ...and disregard older resolution values - maxDepth++; - - then.call( - returned, - resolve( maxDepth, deferred, Identity, special ), - resolve( maxDepth, deferred, Thrower, special ), - resolve( maxDepth, deferred, Identity, - deferred.notifyWith ) - ); - } - - // Handle all other returned values - } else { - - // Only substitute handlers pass on context - // and multiple values (non-spec behavior) - if ( handler !== Identity ) { - that = undefined; - args = [ returned ]; - } - - // Process the value(s) - // Default process is resolve - ( special || deferred.resolveWith )( that, args ); - } - }, - - // Only normal processors (resolve) catch and reject exceptions - process = special ? - mightThrow : - function() { - try { - mightThrow(); - } catch ( e ) { - - if ( jQuery.Deferred.exceptionHook ) { - jQuery.Deferred.exceptionHook( e, - process.stackTrace ); - } - - // Support: Promises/A+ section 2.3.3.3.4.1 - // https://promisesaplus.com/#point-61 - // Ignore post-resolution exceptions - if ( depth + 1 >= maxDepth ) { - - // Only substitute handlers pass on context - // and multiple values (non-spec behavior) - if ( handler !== Thrower ) { - that = undefined; - args = [ e ]; - } - - deferred.rejectWith( that, args ); - } - } - }; - - // Support: Promises/A+ section 2.3.3.3.1 - // https://promisesaplus.com/#point-57 - // Re-resolve promises immediately to dodge false rejection from - // subsequent errors - if ( depth ) { - process(); - } else { - - // Call an optional hook to record the stack, in case of exception - // since it's otherwise lost when execution goes async - if ( jQuery.Deferred.getStackHook ) { - process.stackTrace = jQuery.Deferred.getStackHook(); - } - window.setTimeout( process ); - } - }; - } - - return jQuery.Deferred( function( newDefer ) { - - // progress_handlers.add( ... ) - tuples[ 0 ][ 3 ].add( - resolve( - 0, - newDefer, - jQuery.isFunction( onProgress ) ? - onProgress : - Identity, - newDefer.notifyWith - ) - ); - - // fulfilled_handlers.add( ... ) - tuples[ 1 ][ 3 ].add( - resolve( - 0, - newDefer, - jQuery.isFunction( onFulfilled ) ? - onFulfilled : - Identity - ) - ); - - // rejected_handlers.add( ... ) - tuples[ 2 ][ 3 ].add( - resolve( - 0, - newDefer, - jQuery.isFunction( onRejected ) ? - onRejected : - Thrower - ) - ); - } ).promise(); - }, - - // Get a promise for this deferred - // If obj is provided, the promise aspect is added to the object - promise: function( obj ) { - return obj != null ? jQuery.extend( obj, promise ) : promise; - } - }, - deferred = {}; - - // Add list-specific methods - jQuery.each( tuples, function( i, tuple ) { - var list = tuple[ 2 ], - stateString = tuple[ 5 ]; - - // promise.progress = list.add - // promise.done = list.add - // promise.fail = list.add - promise[ tuple[ 1 ] ] = list.add; - - // Handle state - if ( stateString ) { - list.add( - function() { - - // state = "resolved" (i.e., fulfilled) - // state = "rejected" - state = stateString; - }, - - // rejected_callbacks.disable - // fulfilled_callbacks.disable - tuples[ 3 - i ][ 2 ].disable, - - // progress_callbacks.lock - tuples[ 0 ][ 2 ].lock - ); - } - - // progress_handlers.fire - // fulfilled_handlers.fire - // rejected_handlers.fire - list.add( tuple[ 3 ].fire ); - - // deferred.notify = function() { deferred.notifyWith(...) } - // deferred.resolve = function() { deferred.resolveWith(...) } - // deferred.reject = function() { deferred.rejectWith(...) } - deferred[ tuple[ 0 ] ] = function() { - deferred[ tuple[ 0 ] + "With" ]( this === deferred ? undefined : this, arguments ); - return this; - }; - - // deferred.notifyWith = list.fireWith - // deferred.resolveWith = list.fireWith - // deferred.rejectWith = list.fireWith - deferred[ tuple[ 0 ] + "With" ] = list.fireWith; - } ); - - // Make the deferred a promise - promise.promise( deferred ); - - // Call given func if any - if ( func ) { - func.call( deferred, deferred ); - } - - // All done! - return deferred; - }, - - // Deferred helper - when: function( singleValue ) { - var - - // count of uncompleted subordinates - remaining = arguments.length, - - // count of unprocessed arguments - i = remaining, - - // subordinate fulfillment data - resolveContexts = Array( i ), - resolveValues = slice.call( arguments ), - - // the master Deferred - master = jQuery.Deferred(), - - // subordinate callback factory - updateFunc = function( i ) { - return function( value ) { - resolveContexts[ i ] = this; - resolveValues[ i ] = arguments.length > 1 ? slice.call( arguments ) : value; - if ( !( --remaining ) ) { - master.resolveWith( resolveContexts, resolveValues ); - } - }; - }; - - // Single- and empty arguments are adopted like Promise.resolve - if ( remaining <= 1 ) { - adoptValue( singleValue, master.done( updateFunc( i ) ).resolve, master.reject, - !remaining ); - - // Use .then() to unwrap secondary thenables (cf. gh-3000) - if ( master.state() === "pending" || - jQuery.isFunction( resolveValues[ i ] && resolveValues[ i ].then ) ) { - - return master.then(); - } - } - - // Multiple arguments are aggregated like Promise.all array elements - while ( i-- ) { - adoptValue( resolveValues[ i ], updateFunc( i ), master.reject ); - } - - return master.promise(); - } -} ); - - -// These usually indicate a programmer mistake during development, -// warn about them ASAP rather than swallowing them by default. -var rerrorNames = /^(Eval|Internal|Range|Reference|Syntax|Type|URI)Error$/; - -jQuery.Deferred.exceptionHook = function( error, stack ) { - - // Support: IE 8 - 9 only - // Console exists when dev tools are open, which can happen at any time - if ( window.console && window.console.warn && error && rerrorNames.test( error.name ) ) { - window.console.warn( "jQuery.Deferred exception: " + error.message, error.stack, stack ); - } -}; - - - - -jQuery.readyException = function( error ) { - window.setTimeout( function() { - throw error; - } ); -}; - - - - -// The deferred used on DOM ready -var readyList = jQuery.Deferred(); - -jQuery.fn.ready = function( fn ) { - - readyList - .then( fn ) - - // Wrap jQuery.readyException in a function so that the lookup - // happens at the time of error handling instead of callback - // registration. - .catch( function( error ) { - jQuery.readyException( error ); - } ); - - return this; -}; - -jQuery.extend( { - - // Is the DOM ready to be used? Set to true once it occurs. - isReady: false, - - // A counter to track how many items to wait for before - // the ready event fires. See #6781 - readyWait: 1, - - // Handle when the DOM is ready - ready: function( wait ) { - - // Abort if there are pending holds or we're already ready - if ( wait === true ? --jQuery.readyWait : jQuery.isReady ) { - return; - } - - // Remember that the DOM is ready - jQuery.isReady = true; - - // If a normal DOM Ready event fired, decrement, and wait if need be - if ( wait !== true && --jQuery.readyWait > 0 ) { - return; - } - - // If there are functions bound, to execute - readyList.resolveWith( document, [ jQuery ] ); - } -} ); - -jQuery.ready.then = readyList.then; - -// The ready event handler and self cleanup method -function completed() { - document.removeEventListener( "DOMContentLoaded", completed ); - window.removeEventListener( "load", completed ); - jQuery.ready(); -} - -// Catch cases where $(document).ready() is called -// after the browser event has already occurred. -// Support: IE <=9 - 10 only -// Older IE sometimes signals "interactive" too soon -if ( document.readyState === "complete" || - ( document.readyState !== "loading" && !document.documentElement.doScroll ) ) { - - // Handle it asynchronously to allow scripts the opportunity to delay ready - window.setTimeout( jQuery.ready ); - -} else { - - // Use the handy event callback - document.addEventListener( "DOMContentLoaded", completed ); - - // A fallback to window.onload, that will always work - window.addEventListener( "load", completed ); -} - - - - -// Multifunctional method to get and set values of a collection -// The value/s can optionally be executed if it's a function -var access = function( elems, fn, key, value, chainable, emptyGet, raw ) { - var i = 0, - len = elems.length, - bulk = key == null; - - // Sets many values - if ( jQuery.type( key ) === "object" ) { - chainable = true; - for ( i in key ) { - access( elems, fn, i, key[ i ], true, emptyGet, raw ); - } - - // Sets one value - } else if ( value !== undefined ) { - chainable = true; - - if ( !jQuery.isFunction( value ) ) { - raw = true; - } - - if ( bulk ) { - - // Bulk operations run against the entire set - if ( raw ) { - fn.call( elems, value ); - fn = null; - - // ...except when executing function values - } else { - bulk = fn; - fn = function( elem, key, value ) { - return bulk.call( jQuery( elem ), value ); - }; - } - } - - if ( fn ) { - for ( ; i < len; i++ ) { - fn( - elems[ i ], key, raw ? - value : - value.call( elems[ i ], i, fn( elems[ i ], key ) ) - ); - } - } - } - - if ( chainable ) { - return elems; - } - - // Gets - if ( bulk ) { - return fn.call( elems ); - } - - return len ? fn( elems[ 0 ], key ) : emptyGet; -}; -var acceptData = function( owner ) { - - // Accepts only: - // - Node - // - Node.ELEMENT_NODE - // - Node.DOCUMENT_NODE - // - Object - // - Any - return owner.nodeType === 1 || owner.nodeType === 9 || !( +owner.nodeType ); -}; - - - - -function Data() { - this.expando = jQuery.expando + Data.uid++; -} - -Data.uid = 1; - -Data.prototype = { - - cache: function( owner ) { - - // Check if the owner object already has a cache - var value = owner[ this.expando ]; - - // If not, create one - if ( !value ) { - value = {}; - - // We can accept data for non-element nodes in modern browsers, - // but we should not, see #8335. - // Always return an empty object. - if ( acceptData( owner ) ) { - - // If it is a node unlikely to be stringify-ed or looped over - // use plain assignment - if ( owner.nodeType ) { - owner[ this.expando ] = value; - - // Otherwise secure it in a non-enumerable property - // configurable must be true to allow the property to be - // deleted when data is removed - } else { - Object.defineProperty( owner, this.expando, { - value: value, - configurable: true - } ); - } - } - } - - return value; - }, - set: function( owner, data, value ) { - var prop, - cache = this.cache( owner ); - - // Handle: [ owner, key, value ] args - // Always use camelCase key (gh-2257) - if ( typeof data === "string" ) { - cache[ jQuery.camelCase( data ) ] = value; - - // Handle: [ owner, { properties } ] args - } else { - - // Copy the properties one-by-one to the cache object - for ( prop in data ) { - cache[ jQuery.camelCase( prop ) ] = data[ prop ]; - } - } - return cache; - }, - get: function( owner, key ) { - return key === undefined ? - this.cache( owner ) : - - // Always use camelCase key (gh-2257) - owner[ this.expando ] && owner[ this.expando ][ jQuery.camelCase( key ) ]; - }, - access: function( owner, key, value ) { - - // In cases where either: - // - // 1. No key was specified - // 2. A string key was specified, but no value provided - // - // Take the "read" path and allow the get method to determine - // which value to return, respectively either: - // - // 1. The entire cache object - // 2. The data stored at the key - // - if ( key === undefined || - ( ( key && typeof key === "string" ) && value === undefined ) ) { - - return this.get( owner, key ); - } - - // When the key is not a string, or both a key and value - // are specified, set or extend (existing objects) with either: - // - // 1. An object of properties - // 2. A key and value - // - this.set( owner, key, value ); - - // Since the "set" path can have two possible entry points - // return the expected data based on which path was taken[*] - return value !== undefined ? value : key; - }, - remove: function( owner, key ) { - var i, - cache = owner[ this.expando ]; - - if ( cache === undefined ) { - return; - } - - if ( key !== undefined ) { - - // Support array or space separated string of keys - if ( Array.isArray( key ) ) { - - // If key is an array of keys... - // We always set camelCase keys, so remove that. - key = key.map( jQuery.camelCase ); - } else { - key = jQuery.camelCase( key ); - - // If a key with the spaces exists, use it. - // Otherwise, create an array by matching non-whitespace - key = key in cache ? - [ key ] : - ( key.match( rnothtmlwhite ) || [] ); - } - - i = key.length; - - while ( i-- ) { - delete cache[ key[ i ] ]; - } - } - - // Remove the expando if there's no more data - if ( key === undefined || jQuery.isEmptyObject( cache ) ) { - - // Support: Chrome <=35 - 45 - // Webkit & Blink performance suffers when deleting properties - // from DOM nodes, so set to undefined instead - // https://bugs.chromium.org/p/chromium/issues/detail?id=378607 (bug restricted) - if ( owner.nodeType ) { - owner[ this.expando ] = undefined; - } else { - delete owner[ this.expando ]; - } - } - }, - hasData: function( owner ) { - var cache = owner[ this.expando ]; - return cache !== undefined && !jQuery.isEmptyObject( cache ); - } -}; -var dataPriv = new Data(); - -var dataUser = new Data(); - - - -// Implementation Summary -// -// 1. Enforce API surface and semantic compatibility with 1.9.x branch -// 2. Improve the module's maintainability by reducing the storage -// paths to a single mechanism. -// 3. Use the same single mechanism to support "private" and "user" data. -// 4. _Never_ expose "private" data to user code (TODO: Drop _data, _removeData) -// 5. Avoid exposing implementation details on user objects (eg. expando properties) -// 6. Provide a clear path for implementation upgrade to WeakMap in 2014 - -var rbrace = /^(?:\{[\w\W]*\}|\[[\w\W]*\])$/, - rmultiDash = /[A-Z]/g; - -function getData( data ) { - if ( data === "true" ) { - return true; - } - - if ( data === "false" ) { - return false; - } - - if ( data === "null" ) { - return null; - } - - // Only convert to a number if it doesn't change the string - if ( data === +data + "" ) { - return +data; - } - - if ( rbrace.test( data ) ) { - return JSON.parse( data ); - } - - return data; -} - -function dataAttr( elem, key, data ) { - var name; - - // If nothing was found internally, try to fetch any - // data from the HTML5 data-* attribute - if ( data === undefined && elem.nodeType === 1 ) { - name = "data-" + key.replace( rmultiDash, "-$&" ).toLowerCase(); - data = elem.getAttribute( name ); - - if ( typeof data === "string" ) { - try { - data = getData( data ); - } catch ( e ) {} - - // Make sure we set the data so it isn't changed later - dataUser.set( elem, key, data ); - } else { - data = undefined; - } - } - return data; -} - -jQuery.extend( { - hasData: function( elem ) { - return dataUser.hasData( elem ) || dataPriv.hasData( elem ); - }, - - data: function( elem, name, data ) { - return dataUser.access( elem, name, data ); - }, - - removeData: function( elem, name ) { - dataUser.remove( elem, name ); - }, - - // TODO: Now that all calls to _data and _removeData have been replaced - // with direct calls to dataPriv methods, these can be deprecated. - _data: function( elem, name, data ) { - return dataPriv.access( elem, name, data ); - }, - - _removeData: function( elem, name ) { - dataPriv.remove( elem, name ); - } -} ); - -jQuery.fn.extend( { - data: function( key, value ) { - var i, name, data, - elem = this[ 0 ], - attrs = elem && elem.attributes; - - // Gets all values - if ( key === undefined ) { - if ( this.length ) { - data = dataUser.get( elem ); - - if ( elem.nodeType === 1 && !dataPriv.get( elem, "hasDataAttrs" ) ) { - i = attrs.length; - while ( i-- ) { - - // Support: IE 11 only - // The attrs elements can be null (#14894) - if ( attrs[ i ] ) { - name = attrs[ i ].name; - if ( name.indexOf( "data-" ) === 0 ) { - name = jQuery.camelCase( name.slice( 5 ) ); - dataAttr( elem, name, data[ name ] ); - } - } - } - dataPriv.set( elem, "hasDataAttrs", true ); - } - } - - return data; - } - - // Sets multiple values - if ( typeof key === "object" ) { - return this.each( function() { - dataUser.set( this, key ); - } ); - } - - return access( this, function( value ) { - var data; - - // The calling jQuery object (element matches) is not empty - // (and therefore has an element appears at this[ 0 ]) and the - // `value` parameter was not undefined. An empty jQuery object - // will result in `undefined` for elem = this[ 0 ] which will - // throw an exception if an attempt to read a data cache is made. - if ( elem && value === undefined ) { - - // Attempt to get data from the cache - // The key will always be camelCased in Data - data = dataUser.get( elem, key ); - if ( data !== undefined ) { - return data; - } - - // Attempt to "discover" the data in - // HTML5 custom data-* attrs - data = dataAttr( elem, key ); - if ( data !== undefined ) { - return data; - } - - // We tried really hard, but the data doesn't exist. - return; - } - - // Set the data... - this.each( function() { - - // We always store the camelCased key - dataUser.set( this, key, value ); - } ); - }, null, value, arguments.length > 1, null, true ); - }, - - removeData: function( key ) { - return this.each( function() { - dataUser.remove( this, key ); - } ); - } -} ); - - -jQuery.extend( { - queue: function( elem, type, data ) { - var queue; - - if ( elem ) { - type = ( type || "fx" ) + "queue"; - queue = dataPriv.get( elem, type ); - - // Speed up dequeue by getting out quickly if this is just a lookup - if ( data ) { - if ( !queue || Array.isArray( data ) ) { - queue = dataPriv.access( elem, type, jQuery.makeArray( data ) ); - } else { - queue.push( data ); - } - } - return queue || []; - } - }, - - dequeue: function( elem, type ) { - type = type || "fx"; - - var queue = jQuery.queue( elem, type ), - startLength = queue.length, - fn = queue.shift(), - hooks = jQuery._queueHooks( elem, type ), - next = function() { - jQuery.dequeue( elem, type ); - }; - - // If the fx queue is dequeued, always remove the progress sentinel - if ( fn === "inprogress" ) { - fn = queue.shift(); - startLength--; - } - - if ( fn ) { - - // Add a progress sentinel to prevent the fx queue from being - // automatically dequeued - if ( type === "fx" ) { - queue.unshift( "inprogress" ); - } - - // Clear up the last queue stop function - delete hooks.stop; - fn.call( elem, next, hooks ); - } - - if ( !startLength && hooks ) { - hooks.empty.fire(); - } - }, - - // Not public - generate a queueHooks object, or return the current one - _queueHooks: function( elem, type ) { - var key = type + "queueHooks"; - return dataPriv.get( elem, key ) || dataPriv.access( elem, key, { - empty: jQuery.Callbacks( "once memory" ).add( function() { - dataPriv.remove( elem, [ type + "queue", key ] ); - } ) - } ); - } -} ); - -jQuery.fn.extend( { - queue: function( type, data ) { - var setter = 2; - - if ( typeof type !== "string" ) { - data = type; - type = "fx"; - setter--; - } - - if ( arguments.length < setter ) { - return jQuery.queue( this[ 0 ], type ); - } - - return data === undefined ? - this : - this.each( function() { - var queue = jQuery.queue( this, type, data ); - - // Ensure a hooks for this queue - jQuery._queueHooks( this, type ); - - if ( type === "fx" && queue[ 0 ] !== "inprogress" ) { - jQuery.dequeue( this, type ); - } - } ); - }, - dequeue: function( type ) { - return this.each( function() { - jQuery.dequeue( this, type ); - } ); - }, - clearQueue: function( type ) { - return this.queue( type || "fx", [] ); - }, - - // Get a promise resolved when queues of a certain type - // are emptied (fx is the type by default) - promise: function( type, obj ) { - var tmp, - count = 1, - defer = jQuery.Deferred(), - elements = this, - i = this.length, - resolve = function() { - if ( !( --count ) ) { - defer.resolveWith( elements, [ elements ] ); - } - }; - - if ( typeof type !== "string" ) { - obj = type; - type = undefined; - } - type = type || "fx"; - - while ( i-- ) { - tmp = dataPriv.get( elements[ i ], type + "queueHooks" ); - if ( tmp && tmp.empty ) { - count++; - tmp.empty.add( resolve ); - } - } - resolve(); - return defer.promise( obj ); - } -} ); -var pnum = ( /[+-]?(?:\d*\.|)\d+(?:[eE][+-]?\d+|)/ ).source; - -var rcssNum = new RegExp( "^(?:([+-])=|)(" + pnum + ")([a-z%]*)$", "i" ); - - -var cssExpand = [ "Top", "Right", "Bottom", "Left" ]; - -var isHiddenWithinTree = function( elem, el ) { - - // isHiddenWithinTree might be called from jQuery#filter function; - // in that case, element will be second argument - elem = el || elem; - - // Inline style trumps all - return elem.style.display === "none" || - elem.style.display === "" && - - // Otherwise, check computed style - // Support: Firefox <=43 - 45 - // Disconnected elements can have computed display: none, so first confirm that elem is - // in the document. - jQuery.contains( elem.ownerDocument, elem ) && - - jQuery.css( elem, "display" ) === "none"; - }; - -var swap = function( elem, options, callback, args ) { - var ret, name, - old = {}; - - // Remember the old values, and insert the new ones - for ( name in options ) { - old[ name ] = elem.style[ name ]; - elem.style[ name ] = options[ name ]; - } - - ret = callback.apply( elem, args || [] ); - - // Revert the old values - for ( name in options ) { - elem.style[ name ] = old[ name ]; - } - - return ret; -}; - - - - -function adjustCSS( elem, prop, valueParts, tween ) { - var adjusted, - scale = 1, - maxIterations = 20, - currentValue = tween ? - function() { - return tween.cur(); - } : - function() { - return jQuery.css( elem, prop, "" ); - }, - initial = currentValue(), - unit = valueParts && valueParts[ 3 ] || ( jQuery.cssNumber[ prop ] ? "" : "px" ), - - // Starting value computation is required for potential unit mismatches - initialInUnit = ( jQuery.cssNumber[ prop ] || unit !== "px" && +initial ) && - rcssNum.exec( jQuery.css( elem, prop ) ); - - if ( initialInUnit && initialInUnit[ 3 ] !== unit ) { - - // Trust units reported by jQuery.css - unit = unit || initialInUnit[ 3 ]; - - // Make sure we update the tween properties later on - valueParts = valueParts || []; - - // Iteratively approximate from a nonzero starting point - initialInUnit = +initial || 1; - - do { - - // If previous iteration zeroed out, double until we get *something*. - // Use string for doubling so we don't accidentally see scale as unchanged below - scale = scale || ".5"; - - // Adjust and apply - initialInUnit = initialInUnit / scale; - jQuery.style( elem, prop, initialInUnit + unit ); - - // Update scale, tolerating zero or NaN from tween.cur() - // Break the loop if scale is unchanged or perfect, or if we've just had enough. - } while ( - scale !== ( scale = currentValue() / initial ) && scale !== 1 && --maxIterations - ); - } - - if ( valueParts ) { - initialInUnit = +initialInUnit || +initial || 0; - - // Apply relative offset (+=/-=) if specified - adjusted = valueParts[ 1 ] ? - initialInUnit + ( valueParts[ 1 ] + 1 ) * valueParts[ 2 ] : - +valueParts[ 2 ]; - if ( tween ) { - tween.unit = unit; - tween.start = initialInUnit; - tween.end = adjusted; - } - } - return adjusted; -} - - -var defaultDisplayMap = {}; - -function getDefaultDisplay( elem ) { - var temp, - doc = elem.ownerDocument, - nodeName = elem.nodeName, - display = defaultDisplayMap[ nodeName ]; - - if ( display ) { - return display; - } - - temp = doc.body.appendChild( doc.createElement( nodeName ) ); - display = jQuery.css( temp, "display" ); - - temp.parentNode.removeChild( temp ); - - if ( display === "none" ) { - display = "block"; - } - defaultDisplayMap[ nodeName ] = display; - - return display; -} - -function showHide( elements, show ) { - var display, elem, - values = [], - index = 0, - length = elements.length; - - // Determine new display value for elements that need to change - for ( ; index < length; index++ ) { - elem = elements[ index ]; - if ( !elem.style ) { - continue; - } - - display = elem.style.display; - if ( show ) { - - // Since we force visibility upon cascade-hidden elements, an immediate (and slow) - // check is required in this first loop unless we have a nonempty display value (either - // inline or about-to-be-restored) - if ( display === "none" ) { - values[ index ] = dataPriv.get( elem, "display" ) || null; - if ( !values[ index ] ) { - elem.style.display = ""; - } - } - if ( elem.style.display === "" && isHiddenWithinTree( elem ) ) { - values[ index ] = getDefaultDisplay( elem ); - } - } else { - if ( display !== "none" ) { - values[ index ] = "none"; - - // Remember what we're overwriting - dataPriv.set( elem, "display", display ); - } - } - } - - // Set the display of the elements in a second loop to avoid constant reflow - for ( index = 0; index < length; index++ ) { - if ( values[ index ] != null ) { - elements[ index ].style.display = values[ index ]; - } - } - - return elements; -} - -jQuery.fn.extend( { - show: function() { - return showHide( this, true ); - }, - hide: function() { - return showHide( this ); - }, - toggle: function( state ) { - if ( typeof state === "boolean" ) { - return state ? this.show() : this.hide(); - } - - return this.each( function() { - if ( isHiddenWithinTree( this ) ) { - jQuery( this ).show(); - } else { - jQuery( this ).hide(); - } - } ); - } -} ); -var rcheckableType = ( /^(?:checkbox|radio)$/i ); - -var rtagName = ( /<([a-z][^\/\0>\x20\t\r\n\f]+)/i ); - -var rscriptType = ( /^$|\/(?:java|ecma)script/i ); - - - -// We have to close these tags to support XHTML (#13200) -var wrapMap = { - - // Support: IE <=9 only - option: [ 1, "" ], - - // XHTML parsers do not magically insert elements in the - // same way that tag soup parsers do. So we cannot shorten - // this by omitting or other required elements. - thead: [ 1, "", "
" ], - col: [ 2, "", "
" ], - tr: [ 2, "", "
" ], - td: [ 3, "", "
" ], - - _default: [ 0, "", "" ] -}; - -// Support: IE <=9 only -wrapMap.optgroup = wrapMap.option; - -wrapMap.tbody = wrapMap.tfoot = wrapMap.colgroup = wrapMap.caption = wrapMap.thead; -wrapMap.th = wrapMap.td; - - -function getAll( context, tag ) { - - // Support: IE <=9 - 11 only - // Use typeof to avoid zero-argument method invocation on host objects (#15151) - var ret; - - if ( typeof context.getElementsByTagName !== "undefined" ) { - ret = context.getElementsByTagName( tag || "*" ); - - } else if ( typeof context.querySelectorAll !== "undefined" ) { - ret = context.querySelectorAll( tag || "*" ); - - } else { - ret = []; - } - - if ( tag === undefined || tag && nodeName( context, tag ) ) { - return jQuery.merge( [ context ], ret ); - } - - return ret; -} - - -// Mark scripts as having already been evaluated -function setGlobalEval( elems, refElements ) { - var i = 0, - l = elems.length; - - for ( ; i < l; i++ ) { - dataPriv.set( - elems[ i ], - "globalEval", - !refElements || dataPriv.get( refElements[ i ], "globalEval" ) - ); - } -} - - -var rhtml = /<|&#?\w+;/; - -function buildFragment( elems, context, scripts, selection, ignored ) { - var elem, tmp, tag, wrap, contains, j, - fragment = context.createDocumentFragment(), - nodes = [], - i = 0, - l = elems.length; - - for ( ; i < l; i++ ) { - elem = elems[ i ]; - - if ( elem || elem === 0 ) { - - // Add nodes directly - if ( jQuery.type( elem ) === "object" ) { - - // Support: Android <=4.0 only, PhantomJS 1 only - // push.apply(_, arraylike) throws on ancient WebKit - jQuery.merge( nodes, elem.nodeType ? [ elem ] : elem ); - - // Convert non-html into a text node - } else if ( !rhtml.test( elem ) ) { - nodes.push( context.createTextNode( elem ) ); - - // Convert html into DOM nodes - } else { - tmp = tmp || fragment.appendChild( context.createElement( "div" ) ); - - // Deserialize a standard representation - tag = ( rtagName.exec( elem ) || [ "", "" ] )[ 1 ].toLowerCase(); - wrap = wrapMap[ tag ] || wrapMap._default; - tmp.innerHTML = wrap[ 1 ] + jQuery.htmlPrefilter( elem ) + wrap[ 2 ]; - - // Descend through wrappers to the right content - j = wrap[ 0 ]; - while ( j-- ) { - tmp = tmp.lastChild; - } - - // Support: Android <=4.0 only, PhantomJS 1 only - // push.apply(_, arraylike) throws on ancient WebKit - jQuery.merge( nodes, tmp.childNodes ); - - // Remember the top-level container - tmp = fragment.firstChild; - - // Ensure the created nodes are orphaned (#12392) - tmp.textContent = ""; - } - } - } - - // Remove wrapper from fragment - fragment.textContent = ""; - - i = 0; - while ( ( elem = nodes[ i++ ] ) ) { - - // Skip elements already in the context collection (trac-4087) - if ( selection && jQuery.inArray( elem, selection ) > -1 ) { - if ( ignored ) { - ignored.push( elem ); - } - continue; - } - - contains = jQuery.contains( elem.ownerDocument, elem ); - - // Append to fragment - tmp = getAll( fragment.appendChild( elem ), "script" ); - - // Preserve script evaluation history - if ( contains ) { - setGlobalEval( tmp ); - } - - // Capture executables - if ( scripts ) { - j = 0; - while ( ( elem = tmp[ j++ ] ) ) { - if ( rscriptType.test( elem.type || "" ) ) { - scripts.push( elem ); - } - } - } - } - - return fragment; -} - - -( function() { - var fragment = document.createDocumentFragment(), - div = fragment.appendChild( document.createElement( "div" ) ), - input = document.createElement( "input" ); - - // Support: Android 4.0 - 4.3 only - // Check state lost if the name is set (#11217) - // Support: Windows Web Apps (WWA) - // `name` and `type` must use .setAttribute for WWA (#14901) - input.setAttribute( "type", "radio" ); - input.setAttribute( "checked", "checked" ); - input.setAttribute( "name", "t" ); - - div.appendChild( input ); - - // Support: Android <=4.1 only - // Older WebKit doesn't clone checked state correctly in fragments - support.checkClone = div.cloneNode( true ).cloneNode( true ).lastChild.checked; - - // Support: IE <=11 only - // Make sure textarea (and checkbox) defaultValue is properly cloned - div.innerHTML = ""; - support.noCloneChecked = !!div.cloneNode( true ).lastChild.defaultValue; -} )(); -var documentElement = document.documentElement; - - - -var - rkeyEvent = /^key/, - rmouseEvent = /^(?:mouse|pointer|contextmenu|drag|drop)|click/, - rtypenamespace = /^([^.]*)(?:\.(.+)|)/; - -function returnTrue() { - return true; -} - -function returnFalse() { - return false; -} - -// Support: IE <=9 only -// See #13393 for more info -function safeActiveElement() { - try { - return document.activeElement; - } catch ( err ) { } -} - -function on( elem, types, selector, data, fn, one ) { - var origFn, type; - - // Types can be a map of types/handlers - if ( typeof types === "object" ) { - - // ( types-Object, selector, data ) - if ( typeof selector !== "string" ) { - - // ( types-Object, data ) - data = data || selector; - selector = undefined; - } - for ( type in types ) { - on( elem, type, selector, data, types[ type ], one ); - } - return elem; - } - - if ( data == null && fn == null ) { - - // ( types, fn ) - fn = selector; - data = selector = undefined; - } else if ( fn == null ) { - if ( typeof selector === "string" ) { - - // ( types, selector, fn ) - fn = data; - data = undefined; - } else { - - // ( types, data, fn ) - fn = data; - data = selector; - selector = undefined; - } - } - if ( fn === false ) { - fn = returnFalse; - } else if ( !fn ) { - return elem; - } - - if ( one === 1 ) { - origFn = fn; - fn = function( event ) { - - // Can use an empty set, since event contains the info - jQuery().off( event ); - return origFn.apply( this, arguments ); - }; - - // Use same guid so caller can remove using origFn - fn.guid = origFn.guid || ( origFn.guid = jQuery.guid++ ); - } - return elem.each( function() { - jQuery.event.add( this, types, fn, data, selector ); - } ); -} - -/* - * Helper functions for managing events -- not part of the public interface. - * Props to Dean Edwards' addEvent library for many of the ideas. - */ -jQuery.event = { - - global: {}, - - add: function( elem, types, handler, data, selector ) { - - var handleObjIn, eventHandle, tmp, - events, t, handleObj, - special, handlers, type, namespaces, origType, - elemData = dataPriv.get( elem ); - - // Don't attach events to noData or text/comment nodes (but allow plain objects) - if ( !elemData ) { - return; - } - - // Caller can pass in an object of custom data in lieu of the handler - if ( handler.handler ) { - handleObjIn = handler; - handler = handleObjIn.handler; - selector = handleObjIn.selector; - } - - // Ensure that invalid selectors throw exceptions at attach time - // Evaluate against documentElement in case elem is a non-element node (e.g., document) - if ( selector ) { - jQuery.find.matchesSelector( documentElement, selector ); - } - - // Make sure that the handler has a unique ID, used to find/remove it later - if ( !handler.guid ) { - handler.guid = jQuery.guid++; - } - - // Init the element's event structure and main handler, if this is the first - if ( !( events = elemData.events ) ) { - events = elemData.events = {}; - } - if ( !( eventHandle = elemData.handle ) ) { - eventHandle = elemData.handle = function( e ) { - - // Discard the second event of a jQuery.event.trigger() and - // when an event is called after a page has unloaded - return typeof jQuery !== "undefined" && jQuery.event.triggered !== e.type ? - jQuery.event.dispatch.apply( elem, arguments ) : undefined; - }; - } - - // Handle multiple events separated by a space - types = ( types || "" ).match( rnothtmlwhite ) || [ "" ]; - t = types.length; - while ( t-- ) { - tmp = rtypenamespace.exec( types[ t ] ) || []; - type = origType = tmp[ 1 ]; - namespaces = ( tmp[ 2 ] || "" ).split( "." ).sort(); - - // There *must* be a type, no attaching namespace-only handlers - if ( !type ) { - continue; - } - - // If event changes its type, use the special event handlers for the changed type - special = jQuery.event.special[ type ] || {}; - - // If selector defined, determine special event api type, otherwise given type - type = ( selector ? special.delegateType : special.bindType ) || type; - - // Update special based on newly reset type - special = jQuery.event.special[ type ] || {}; - - // handleObj is passed to all event handlers - handleObj = jQuery.extend( { - type: type, - origType: origType, - data: data, - handler: handler, - guid: handler.guid, - selector: selector, - needsContext: selector && jQuery.expr.match.needsContext.test( selector ), - namespace: namespaces.join( "." ) - }, handleObjIn ); - - // Init the event handler queue if we're the first - if ( !( handlers = events[ type ] ) ) { - handlers = events[ type ] = []; - handlers.delegateCount = 0; - - // Only use addEventListener if the special events handler returns false - if ( !special.setup || - special.setup.call( elem, data, namespaces, eventHandle ) === false ) { - - if ( elem.addEventListener ) { - elem.addEventListener( type, eventHandle ); - } - } - } - - if ( special.add ) { - special.add.call( elem, handleObj ); - - if ( !handleObj.handler.guid ) { - handleObj.handler.guid = handler.guid; - } - } - - // Add to the element's handler list, delegates in front - if ( selector ) { - handlers.splice( handlers.delegateCount++, 0, handleObj ); - } else { - handlers.push( handleObj ); - } - - // Keep track of which events have ever been used, for event optimization - jQuery.event.global[ type ] = true; - } - - }, - - // Detach an event or set of events from an element - remove: function( elem, types, handler, selector, mappedTypes ) { - - var j, origCount, tmp, - events, t, handleObj, - special, handlers, type, namespaces, origType, - elemData = dataPriv.hasData( elem ) && dataPriv.get( elem ); - - if ( !elemData || !( events = elemData.events ) ) { - return; - } - - // Once for each type.namespace in types; type may be omitted - types = ( types || "" ).match( rnothtmlwhite ) || [ "" ]; - t = types.length; - while ( t-- ) { - tmp = rtypenamespace.exec( types[ t ] ) || []; - type = origType = tmp[ 1 ]; - namespaces = ( tmp[ 2 ] || "" ).split( "." ).sort(); - - // Unbind all events (on this namespace, if provided) for the element - if ( !type ) { - for ( type in events ) { - jQuery.event.remove( elem, type + types[ t ], handler, selector, true ); - } - continue; - } - - special = jQuery.event.special[ type ] || {}; - type = ( selector ? special.delegateType : special.bindType ) || type; - handlers = events[ type ] || []; - tmp = tmp[ 2 ] && - new RegExp( "(^|\\.)" + namespaces.join( "\\.(?:.*\\.|)" ) + "(\\.|$)" ); - - // Remove matching events - origCount = j = handlers.length; - while ( j-- ) { - handleObj = handlers[ j ]; - - if ( ( mappedTypes || origType === handleObj.origType ) && - ( !handler || handler.guid === handleObj.guid ) && - ( !tmp || tmp.test( handleObj.namespace ) ) && - ( !selector || selector === handleObj.selector || - selector === "**" && handleObj.selector ) ) { - handlers.splice( j, 1 ); - - if ( handleObj.selector ) { - handlers.delegateCount--; - } - if ( special.remove ) { - special.remove.call( elem, handleObj ); - } - } - } - - // Remove generic event handler if we removed something and no more handlers exist - // (avoids potential for endless recursion during removal of special event handlers) - if ( origCount && !handlers.length ) { - if ( !special.teardown || - special.teardown.call( elem, namespaces, elemData.handle ) === false ) { - - jQuery.removeEvent( elem, type, elemData.handle ); - } - - delete events[ type ]; - } - } - - // Remove data and the expando if it's no longer used - if ( jQuery.isEmptyObject( events ) ) { - dataPriv.remove( elem, "handle events" ); - } - }, - - dispatch: function( nativeEvent ) { - - // Make a writable jQuery.Event from the native event object - var event = jQuery.event.fix( nativeEvent ); - - var i, j, ret, matched, handleObj, handlerQueue, - args = new Array( arguments.length ), - handlers = ( dataPriv.get( this, "events" ) || {} )[ event.type ] || [], - special = jQuery.event.special[ event.type ] || {}; - - // Use the fix-ed jQuery.Event rather than the (read-only) native event - args[ 0 ] = event; - - for ( i = 1; i < arguments.length; i++ ) { - args[ i ] = arguments[ i ]; - } - - event.delegateTarget = this; - - // Call the preDispatch hook for the mapped type, and let it bail if desired - if ( special.preDispatch && special.preDispatch.call( this, event ) === false ) { - return; - } - - // Determine handlers - handlerQueue = jQuery.event.handlers.call( this, event, handlers ); - - // Run delegates first; they may want to stop propagation beneath us - i = 0; - while ( ( matched = handlerQueue[ i++ ] ) && !event.isPropagationStopped() ) { - event.currentTarget = matched.elem; - - j = 0; - while ( ( handleObj = matched.handlers[ j++ ] ) && - !event.isImmediatePropagationStopped() ) { - - // Triggered event must either 1) have no namespace, or 2) have namespace(s) - // a subset or equal to those in the bound event (both can have no namespace). - if ( !event.rnamespace || event.rnamespace.test( handleObj.namespace ) ) { - - event.handleObj = handleObj; - event.data = handleObj.data; - - ret = ( ( jQuery.event.special[ handleObj.origType ] || {} ).handle || - handleObj.handler ).apply( matched.elem, args ); - - if ( ret !== undefined ) { - if ( ( event.result = ret ) === false ) { - event.preventDefault(); - event.stopPropagation(); - } - } - } - } - } - - // Call the postDispatch hook for the mapped type - if ( special.postDispatch ) { - special.postDispatch.call( this, event ); - } - - return event.result; - }, - - handlers: function( event, handlers ) { - var i, handleObj, sel, matchedHandlers, matchedSelectors, - handlerQueue = [], - delegateCount = handlers.delegateCount, - cur = event.target; - - // Find delegate handlers - if ( delegateCount && - - // Support: IE <=9 - // Black-hole SVG instance trees (trac-13180) - cur.nodeType && - - // Support: Firefox <=42 - // Suppress spec-violating clicks indicating a non-primary pointer button (trac-3861) - // https://www.w3.org/TR/DOM-Level-3-Events/#event-type-click - // Support: IE 11 only - // ...but not arrow key "clicks" of radio inputs, which can have `button` -1 (gh-2343) - !( event.type === "click" && event.button >= 1 ) ) { - - for ( ; cur !== this; cur = cur.parentNode || this ) { - - // Don't check non-elements (#13208) - // Don't process clicks on disabled elements (#6911, #8165, #11382, #11764) - if ( cur.nodeType === 1 && !( event.type === "click" && cur.disabled === true ) ) { - matchedHandlers = []; - matchedSelectors = {}; - for ( i = 0; i < delegateCount; i++ ) { - handleObj = handlers[ i ]; - - // Don't conflict with Object.prototype properties (#13203) - sel = handleObj.selector + " "; - - if ( matchedSelectors[ sel ] === undefined ) { - matchedSelectors[ sel ] = handleObj.needsContext ? - jQuery( sel, this ).index( cur ) > -1 : - jQuery.find( sel, this, null, [ cur ] ).length; - } - if ( matchedSelectors[ sel ] ) { - matchedHandlers.push( handleObj ); - } - } - if ( matchedHandlers.length ) { - handlerQueue.push( { elem: cur, handlers: matchedHandlers } ); - } - } - } - } - - // Add the remaining (directly-bound) handlers - cur = this; - if ( delegateCount < handlers.length ) { - handlerQueue.push( { elem: cur, handlers: handlers.slice( delegateCount ) } ); - } - - return handlerQueue; - }, - - addProp: function( name, hook ) { - Object.defineProperty( jQuery.Event.prototype, name, { - enumerable: true, - configurable: true, - - get: jQuery.isFunction( hook ) ? - function() { - if ( this.originalEvent ) { - return hook( this.originalEvent ); - } - } : - function() { - if ( this.originalEvent ) { - return this.originalEvent[ name ]; - } - }, - - set: function( value ) { - Object.defineProperty( this, name, { - enumerable: true, - configurable: true, - writable: true, - value: value - } ); - } - } ); - }, - - fix: function( originalEvent ) { - return originalEvent[ jQuery.expando ] ? - originalEvent : - new jQuery.Event( originalEvent ); - }, - - special: { - load: { - - // Prevent triggered image.load events from bubbling to window.load - noBubble: true - }, - focus: { - - // Fire native event if possible so blur/focus sequence is correct - trigger: function() { - if ( this !== safeActiveElement() && this.focus ) { - this.focus(); - return false; - } - }, - delegateType: "focusin" - }, - blur: { - trigger: function() { - if ( this === safeActiveElement() && this.blur ) { - this.blur(); - return false; - } - }, - delegateType: "focusout" - }, - click: { - - // For checkbox, fire native event so checked state will be right - trigger: function() { - if ( this.type === "checkbox" && this.click && nodeName( this, "input" ) ) { - this.click(); - return false; - } - }, - - // For cross-browser consistency, don't fire native .click() on links - _default: function( event ) { - return nodeName( event.target, "a" ); - } - }, - - beforeunload: { - postDispatch: function( event ) { - - // Support: Firefox 20+ - // Firefox doesn't alert if the returnValue field is not set. - if ( event.result !== undefined && event.originalEvent ) { - event.originalEvent.returnValue = event.result; - } - } - } - } -}; - -jQuery.removeEvent = function( elem, type, handle ) { - - // This "if" is needed for plain objects - if ( elem.removeEventListener ) { - elem.removeEventListener( type, handle ); - } -}; - -jQuery.Event = function( src, props ) { - - // Allow instantiation without the 'new' keyword - if ( !( this instanceof jQuery.Event ) ) { - return new jQuery.Event( src, props ); - } - - // Event object - if ( src && src.type ) { - this.originalEvent = src; - this.type = src.type; - - // Events bubbling up the document may have been marked as prevented - // by a handler lower down the tree; reflect the correct value. - this.isDefaultPrevented = src.defaultPrevented || - src.defaultPrevented === undefined && - - // Support: Android <=2.3 only - src.returnValue === false ? - returnTrue : - returnFalse; - - // Create target properties - // Support: Safari <=6 - 7 only - // Target should not be a text node (#504, #13143) - this.target = ( src.target && src.target.nodeType === 3 ) ? - src.target.parentNode : - src.target; - - this.currentTarget = src.currentTarget; - this.relatedTarget = src.relatedTarget; - - // Event type - } else { - this.type = src; - } - - // Put explicitly provided properties onto the event object - if ( props ) { - jQuery.extend( this, props ); - } - - // Create a timestamp if incoming event doesn't have one - this.timeStamp = src && src.timeStamp || jQuery.now(); - - // Mark it as fixed - this[ jQuery.expando ] = true; -}; - -// jQuery.Event is based on DOM3 Events as specified by the ECMAScript Language Binding -// https://www.w3.org/TR/2003/WD-DOM-Level-3-Events-20030331/ecma-script-binding.html -jQuery.Event.prototype = { - constructor: jQuery.Event, - isDefaultPrevented: returnFalse, - isPropagationStopped: returnFalse, - isImmediatePropagationStopped: returnFalse, - isSimulated: false, - - preventDefault: function() { - var e = this.originalEvent; - - this.isDefaultPrevented = returnTrue; - - if ( e && !this.isSimulated ) { - e.preventDefault(); - } - }, - stopPropagation: function() { - var e = this.originalEvent; - - this.isPropagationStopped = returnTrue; - - if ( e && !this.isSimulated ) { - e.stopPropagation(); - } - }, - stopImmediatePropagation: function() { - var e = this.originalEvent; - - this.isImmediatePropagationStopped = returnTrue; - - if ( e && !this.isSimulated ) { - e.stopImmediatePropagation(); - } - - this.stopPropagation(); - } -}; - -// Includes all common event props including KeyEvent and MouseEvent specific props -jQuery.each( { - altKey: true, - bubbles: true, - cancelable: true, - changedTouches: true, - ctrlKey: true, - detail: true, - eventPhase: true, - metaKey: true, - pageX: true, - pageY: true, - shiftKey: true, - view: true, - "char": true, - charCode: true, - key: true, - keyCode: true, - button: true, - buttons: true, - clientX: true, - clientY: true, - offsetX: true, - offsetY: true, - pointerId: true, - pointerType: true, - screenX: true, - screenY: true, - targetTouches: true, - toElement: true, - touches: true, - - which: function( event ) { - var button = event.button; - - // Add which for key events - if ( event.which == null && rkeyEvent.test( event.type ) ) { - return event.charCode != null ? event.charCode : event.keyCode; - } - - // Add which for click: 1 === left; 2 === middle; 3 === right - if ( !event.which && button !== undefined && rmouseEvent.test( event.type ) ) { - if ( button & 1 ) { - return 1; - } - - if ( button & 2 ) { - return 3; - } - - if ( button & 4 ) { - return 2; - } - - return 0; - } - - return event.which; - } -}, jQuery.event.addProp ); - -// Create mouseenter/leave events using mouseover/out and event-time checks -// so that event delegation works in jQuery. -// Do the same for pointerenter/pointerleave and pointerover/pointerout -// -// Support: Safari 7 only -// Safari sends mouseenter too often; see: -// https://bugs.chromium.org/p/chromium/issues/detail?id=470258 -// for the description of the bug (it existed in older Chrome versions as well). -jQuery.each( { - mouseenter: "mouseover", - mouseleave: "mouseout", - pointerenter: "pointerover", - pointerleave: "pointerout" -}, function( orig, fix ) { - jQuery.event.special[ orig ] = { - delegateType: fix, - bindType: fix, - - handle: function( event ) { - var ret, - target = this, - related = event.relatedTarget, - handleObj = event.handleObj; - - // For mouseenter/leave call the handler if related is outside the target. - // NB: No relatedTarget if the mouse left/entered the browser window - if ( !related || ( related !== target && !jQuery.contains( target, related ) ) ) { - event.type = handleObj.origType; - ret = handleObj.handler.apply( this, arguments ); - event.type = fix; - } - return ret; - } - }; -} ); - -jQuery.fn.extend( { - - on: function( types, selector, data, fn ) { - return on( this, types, selector, data, fn ); - }, - one: function( types, selector, data, fn ) { - return on( this, types, selector, data, fn, 1 ); - }, - off: function( types, selector, fn ) { - var handleObj, type; - if ( types && types.preventDefault && types.handleObj ) { - - // ( event ) dispatched jQuery.Event - handleObj = types.handleObj; - jQuery( types.delegateTarget ).off( - handleObj.namespace ? - handleObj.origType + "." + handleObj.namespace : - handleObj.origType, - handleObj.selector, - handleObj.handler - ); - return this; - } - if ( typeof types === "object" ) { - - // ( types-object [, selector] ) - for ( type in types ) { - this.off( type, selector, types[ type ] ); - } - return this; - } - if ( selector === false || typeof selector === "function" ) { - - // ( types [, fn] ) - fn = selector; - selector = undefined; - } - if ( fn === false ) { - fn = returnFalse; - } - return this.each( function() { - jQuery.event.remove( this, types, fn, selector ); - } ); - } -} ); - - -var - - /* eslint-disable max-len */ - - // See https://github.com/eslint/eslint/issues/3229 - rxhtmlTag = /<(?!area|br|col|embed|hr|img|input|link|meta|param)(([a-z][^\/\0>\x20\t\r\n\f]*)[^>]*)\/>/gi, - - /* eslint-enable */ - - // Support: IE <=10 - 11, Edge 12 - 13 - // In IE/Edge using regex groups here causes severe slowdowns. - // See https://connect.microsoft.com/IE/feedback/details/1736512/ - rnoInnerhtml = /\s*$/g; - -// Prefer a tbody over its parent table for containing new rows -function manipulationTarget( elem, content ) { - if ( nodeName( elem, "table" ) && - nodeName( content.nodeType !== 11 ? content : content.firstChild, "tr" ) ) { - - return jQuery( ">tbody", elem )[ 0 ] || elem; - } - - return elem; -} - -// Replace/restore the type attribute of script elements for safe DOM manipulation -function disableScript( elem ) { - elem.type = ( elem.getAttribute( "type" ) !== null ) + "/" + elem.type; - return elem; -} -function restoreScript( elem ) { - var match = rscriptTypeMasked.exec( elem.type ); - - if ( match ) { - elem.type = match[ 1 ]; - } else { - elem.removeAttribute( "type" ); - } - - return elem; -} - -function cloneCopyEvent( src, dest ) { - var i, l, type, pdataOld, pdataCur, udataOld, udataCur, events; - - if ( dest.nodeType !== 1 ) { - return; - } - - // 1. Copy private data: events, handlers, etc. - if ( dataPriv.hasData( src ) ) { - pdataOld = dataPriv.access( src ); - pdataCur = dataPriv.set( dest, pdataOld ); - events = pdataOld.events; - - if ( events ) { - delete pdataCur.handle; - pdataCur.events = {}; - - for ( type in events ) { - for ( i = 0, l = events[ type ].length; i < l; i++ ) { - jQuery.event.add( dest, type, events[ type ][ i ] ); - } - } - } - } - - // 2. Copy user data - if ( dataUser.hasData( src ) ) { - udataOld = dataUser.access( src ); - udataCur = jQuery.extend( {}, udataOld ); - - dataUser.set( dest, udataCur ); - } -} - -// Fix IE bugs, see support tests -function fixInput( src, dest ) { - var nodeName = dest.nodeName.toLowerCase(); - - // Fails to persist the checked state of a cloned checkbox or radio button. - if ( nodeName === "input" && rcheckableType.test( src.type ) ) { - dest.checked = src.checked; - - // Fails to return the selected option to the default selected state when cloning options - } else if ( nodeName === "input" || nodeName === "textarea" ) { - dest.defaultValue = src.defaultValue; - } -} - -function domManip( collection, args, callback, ignored ) { - - // Flatten any nested arrays - args = concat.apply( [], args ); - - var fragment, first, scripts, hasScripts, node, doc, - i = 0, - l = collection.length, - iNoClone = l - 1, - value = args[ 0 ], - isFunction = jQuery.isFunction( value ); - - // We can't cloneNode fragments that contain checked, in WebKit - if ( isFunction || - ( l > 1 && typeof value === "string" && - !support.checkClone && rchecked.test( value ) ) ) { - return collection.each( function( index ) { - var self = collection.eq( index ); - if ( isFunction ) { - args[ 0 ] = value.call( this, index, self.html() ); - } - domManip( self, args, callback, ignored ); - } ); - } - - if ( l ) { - fragment = buildFragment( args, collection[ 0 ].ownerDocument, false, collection, ignored ); - first = fragment.firstChild; - - if ( fragment.childNodes.length === 1 ) { - fragment = first; - } - - // Require either new content or an interest in ignored elements to invoke the callback - if ( first || ignored ) { - scripts = jQuery.map( getAll( fragment, "script" ), disableScript ); - hasScripts = scripts.length; - - // Use the original fragment for the last item - // instead of the first because it can end up - // being emptied incorrectly in certain situations (#8070). - for ( ; i < l; i++ ) { - node = fragment; - - if ( i !== iNoClone ) { - node = jQuery.clone( node, true, true ); - - // Keep references to cloned scripts for later restoration - if ( hasScripts ) { - - // Support: Android <=4.0 only, PhantomJS 1 only - // push.apply(_, arraylike) throws on ancient WebKit - jQuery.merge( scripts, getAll( node, "script" ) ); - } - } - - callback.call( collection[ i ], node, i ); - } - - if ( hasScripts ) { - doc = scripts[ scripts.length - 1 ].ownerDocument; - - // Reenable scripts - jQuery.map( scripts, restoreScript ); - - // Evaluate executable scripts on first document insertion - for ( i = 0; i < hasScripts; i++ ) { - node = scripts[ i ]; - if ( rscriptType.test( node.type || "" ) && - !dataPriv.access( node, "globalEval" ) && - jQuery.contains( doc, node ) ) { - - if ( node.src ) { - - // Optional AJAX dependency, but won't run scripts if not present - if ( jQuery._evalUrl ) { - jQuery._evalUrl( node.src ); - } - } else { - DOMEval( node.textContent.replace( rcleanScript, "" ), doc ); - } - } - } - } - } - } - - return collection; -} - -function remove( elem, selector, keepData ) { - var node, - nodes = selector ? jQuery.filter( selector, elem ) : elem, - i = 0; - - for ( ; ( node = nodes[ i ] ) != null; i++ ) { - if ( !keepData && node.nodeType === 1 ) { - jQuery.cleanData( getAll( node ) ); - } - - if ( node.parentNode ) { - if ( keepData && jQuery.contains( node.ownerDocument, node ) ) { - setGlobalEval( getAll( node, "script" ) ); - } - node.parentNode.removeChild( node ); - } - } - - return elem; -} - -jQuery.extend( { - htmlPrefilter: function( html ) { - return html.replace( rxhtmlTag, "<$1>" ); - }, - - clone: function( elem, dataAndEvents, deepDataAndEvents ) { - var i, l, srcElements, destElements, - clone = elem.cloneNode( true ), - inPage = jQuery.contains( elem.ownerDocument, elem ); - - // Fix IE cloning issues - if ( !support.noCloneChecked && ( elem.nodeType === 1 || elem.nodeType === 11 ) && - !jQuery.isXMLDoc( elem ) ) { - - // We eschew Sizzle here for performance reasons: https://jsperf.com/getall-vs-sizzle/2 - destElements = getAll( clone ); - srcElements = getAll( elem ); - - for ( i = 0, l = srcElements.length; i < l; i++ ) { - fixInput( srcElements[ i ], destElements[ i ] ); - } - } - - // Copy the events from the original to the clone - if ( dataAndEvents ) { - if ( deepDataAndEvents ) { - srcElements = srcElements || getAll( elem ); - destElements = destElements || getAll( clone ); - - for ( i = 0, l = srcElements.length; i < l; i++ ) { - cloneCopyEvent( srcElements[ i ], destElements[ i ] ); - } - } else { - cloneCopyEvent( elem, clone ); - } - } - - // Preserve script evaluation history - destElements = getAll( clone, "script" ); - if ( destElements.length > 0 ) { - setGlobalEval( destElements, !inPage && getAll( elem, "script" ) ); - } - - // Return the cloned set - return clone; - }, - - cleanData: function( elems ) { - var data, elem, type, - special = jQuery.event.special, - i = 0; - - for ( ; ( elem = elems[ i ] ) !== undefined; i++ ) { - if ( acceptData( elem ) ) { - if ( ( data = elem[ dataPriv.expando ] ) ) { - if ( data.events ) { - for ( type in data.events ) { - if ( special[ type ] ) { - jQuery.event.remove( elem, type ); - - // This is a shortcut to avoid jQuery.event.remove's overhead - } else { - jQuery.removeEvent( elem, type, data.handle ); - } - } - } - - // Support: Chrome <=35 - 45+ - // Assign undefined instead of using delete, see Data#remove - elem[ dataPriv.expando ] = undefined; - } - if ( elem[ dataUser.expando ] ) { - - // Support: Chrome <=35 - 45+ - // Assign undefined instead of using delete, see Data#remove - elem[ dataUser.expando ] = undefined; - } - } - } - } -} ); - -jQuery.fn.extend( { - detach: function( selector ) { - return remove( this, selector, true ); - }, - - remove: function( selector ) { - return remove( this, selector ); - }, - - text: function( value ) { - return access( this, function( value ) { - return value === undefined ? - jQuery.text( this ) : - this.empty().each( function() { - if ( this.nodeType === 1 || this.nodeType === 11 || this.nodeType === 9 ) { - this.textContent = value; - } - } ); - }, null, value, arguments.length ); - }, - - append: function() { - return domManip( this, arguments, function( elem ) { - if ( this.nodeType === 1 || this.nodeType === 11 || this.nodeType === 9 ) { - var target = manipulationTarget( this, elem ); - target.appendChild( elem ); - } - } ); - }, - - prepend: function() { - return domManip( this, arguments, function( elem ) { - if ( this.nodeType === 1 || this.nodeType === 11 || this.nodeType === 9 ) { - var target = manipulationTarget( this, elem ); - target.insertBefore( elem, target.firstChild ); - } - } ); - }, - - before: function() { - return domManip( this, arguments, function( elem ) { - if ( this.parentNode ) { - this.parentNode.insertBefore( elem, this ); - } - } ); - }, - - after: function() { - return domManip( this, arguments, function( elem ) { - if ( this.parentNode ) { - this.parentNode.insertBefore( elem, this.nextSibling ); - } - } ); - }, - - empty: function() { - var elem, - i = 0; - - for ( ; ( elem = this[ i ] ) != null; i++ ) { - if ( elem.nodeType === 1 ) { - - // Prevent memory leaks - jQuery.cleanData( getAll( elem, false ) ); - - // Remove any remaining nodes - elem.textContent = ""; - } - } - - return this; - }, - - clone: function( dataAndEvents, deepDataAndEvents ) { - dataAndEvents = dataAndEvents == null ? false : dataAndEvents; - deepDataAndEvents = deepDataAndEvents == null ? dataAndEvents : deepDataAndEvents; - - return this.map( function() { - return jQuery.clone( this, dataAndEvents, deepDataAndEvents ); - } ); - }, - - html: function( value ) { - return access( this, function( value ) { - var elem = this[ 0 ] || {}, - i = 0, - l = this.length; - - if ( value === undefined && elem.nodeType === 1 ) { - return elem.innerHTML; - } - - // See if we can take a shortcut and just use innerHTML - if ( typeof value === "string" && !rnoInnerhtml.test( value ) && - !wrapMap[ ( rtagName.exec( value ) || [ "", "" ] )[ 1 ].toLowerCase() ] ) { - - value = jQuery.htmlPrefilter( value ); - - try { - for ( ; i < l; i++ ) { - elem = this[ i ] || {}; - - // Remove element nodes and prevent memory leaks - if ( elem.nodeType === 1 ) { - jQuery.cleanData( getAll( elem, false ) ); - elem.innerHTML = value; - } - } - - elem = 0; - - // If using innerHTML throws an exception, use the fallback method - } catch ( e ) {} - } - - if ( elem ) { - this.empty().append( value ); - } - }, null, value, arguments.length ); - }, - - replaceWith: function() { - var ignored = []; - - // Make the changes, replacing each non-ignored context element with the new content - return domManip( this, arguments, function( elem ) { - var parent = this.parentNode; - - if ( jQuery.inArray( this, ignored ) < 0 ) { - jQuery.cleanData( getAll( this ) ); - if ( parent ) { - parent.replaceChild( elem, this ); - } - } - - // Force callback invocation - }, ignored ); - } -} ); - -jQuery.each( { - appendTo: "append", - prependTo: "prepend", - insertBefore: "before", - insertAfter: "after", - replaceAll: "replaceWith" -}, function( name, original ) { - jQuery.fn[ name ] = function( selector ) { - var elems, - ret = [], - insert = jQuery( selector ), - last = insert.length - 1, - i = 0; - - for ( ; i <= last; i++ ) { - elems = i === last ? this : this.clone( true ); - jQuery( insert[ i ] )[ original ]( elems ); - - // Support: Android <=4.0 only, PhantomJS 1 only - // .get() because push.apply(_, arraylike) throws on ancient WebKit - push.apply( ret, elems.get() ); - } - - return this.pushStack( ret ); - }; -} ); -var rmargin = ( /^margin/ ); - -var rnumnonpx = new RegExp( "^(" + pnum + ")(?!px)[a-z%]+$", "i" ); - -var getStyles = function( elem ) { - - // Support: IE <=11 only, Firefox <=30 (#15098, #14150) - // IE throws on elements created in popups - // FF meanwhile throws on frame elements through "defaultView.getComputedStyle" - var view = elem.ownerDocument.defaultView; - - if ( !view || !view.opener ) { - view = window; - } - - return view.getComputedStyle( elem ); - }; - - - -( function() { - - // Executing both pixelPosition & boxSizingReliable tests require only one layout - // so they're executed at the same time to save the second computation. - function computeStyleTests() { - - // This is a singleton, we need to execute it only once - if ( !div ) { - return; - } - - div.style.cssText = - "box-sizing:border-box;" + - "position:relative;display:block;" + - "margin:auto;border:1px;padding:1px;" + - "top:1%;width:50%"; - div.innerHTML = ""; - documentElement.appendChild( container ); - - var divStyle = window.getComputedStyle( div ); - pixelPositionVal = divStyle.top !== "1%"; - - // Support: Android 4.0 - 4.3 only, Firefox <=3 - 44 - reliableMarginLeftVal = divStyle.marginLeft === "2px"; - boxSizingReliableVal = divStyle.width === "4px"; - - // Support: Android 4.0 - 4.3 only - // Some styles come back with percentage values, even though they shouldn't - div.style.marginRight = "50%"; - pixelMarginRightVal = divStyle.marginRight === "4px"; - - documentElement.removeChild( container ); - - // Nullify the div so it wouldn't be stored in the memory and - // it will also be a sign that checks already performed - div = null; - } - - var pixelPositionVal, boxSizingReliableVal, pixelMarginRightVal, reliableMarginLeftVal, - container = document.createElement( "div" ), - div = document.createElement( "div" ); - - // Finish early in limited (non-browser) environments - if ( !div.style ) { - return; - } - - // Support: IE <=9 - 11 only - // Style of cloned element affects source element cloned (#8908) - div.style.backgroundClip = "content-box"; - div.cloneNode( true ).style.backgroundClip = ""; - support.clearCloneStyle = div.style.backgroundClip === "content-box"; - - container.style.cssText = "border:0;width:8px;height:0;top:0;left:-9999px;" + - "padding:0;margin-top:1px;position:absolute"; - container.appendChild( div ); - - jQuery.extend( support, { - pixelPosition: function() { - computeStyleTests(); - return pixelPositionVal; - }, - boxSizingReliable: function() { - computeStyleTests(); - return boxSizingReliableVal; - }, - pixelMarginRight: function() { - computeStyleTests(); - return pixelMarginRightVal; - }, - reliableMarginLeft: function() { - computeStyleTests(); - return reliableMarginLeftVal; - } - } ); -} )(); - - -function curCSS( elem, name, computed ) { - var width, minWidth, maxWidth, ret, - - // Support: Firefox 51+ - // Retrieving style before computed somehow - // fixes an issue with getting wrong values - // on detached elements - style = elem.style; - - computed = computed || getStyles( elem ); - - // getPropertyValue is needed for: - // .css('filter') (IE 9 only, #12537) - // .css('--customProperty) (#3144) - if ( computed ) { - ret = computed.getPropertyValue( name ) || computed[ name ]; - - if ( ret === "" && !jQuery.contains( elem.ownerDocument, elem ) ) { - ret = jQuery.style( elem, name ); - } - - // A tribute to the "awesome hack by Dean Edwards" - // Android Browser returns percentage for some values, - // but width seems to be reliably pixels. - // This is against the CSSOM draft spec: - // https://drafts.csswg.org/cssom/#resolved-values - if ( !support.pixelMarginRight() && rnumnonpx.test( ret ) && rmargin.test( name ) ) { - - // Remember the original values - width = style.width; - minWidth = style.minWidth; - maxWidth = style.maxWidth; - - // Put in the new values to get a computed value out - style.minWidth = style.maxWidth = style.width = ret; - ret = computed.width; - - // Revert the changed values - style.width = width; - style.minWidth = minWidth; - style.maxWidth = maxWidth; - } - } - - return ret !== undefined ? - - // Support: IE <=9 - 11 only - // IE returns zIndex value as an integer. - ret + "" : - ret; -} - - -function addGetHookIf( conditionFn, hookFn ) { - - // Define the hook, we'll check on the first run if it's really needed. - return { - get: function() { - if ( conditionFn() ) { - - // Hook not needed (or it's not possible to use it due - // to missing dependency), remove it. - delete this.get; - return; - } - - // Hook needed; redefine it so that the support test is not executed again. - return ( this.get = hookFn ).apply( this, arguments ); - } - }; -} - - -var - - // Swappable if display is none or starts with table - // except "table", "table-cell", or "table-caption" - // See here for display values: https://developer.mozilla.org/en-US/docs/CSS/display - rdisplayswap = /^(none|table(?!-c[ea]).+)/, - rcustomProp = /^--/, - cssShow = { position: "absolute", visibility: "hidden", display: "block" }, - cssNormalTransform = { - letterSpacing: "0", - fontWeight: "400" - }, - - cssPrefixes = [ "Webkit", "Moz", "ms" ], - emptyStyle = document.createElement( "div" ).style; - -// Return a css property mapped to a potentially vendor prefixed property -function vendorPropName( name ) { - - // Shortcut for names that are not vendor prefixed - if ( name in emptyStyle ) { - return name; - } - - // Check for vendor prefixed names - var capName = name[ 0 ].toUpperCase() + name.slice( 1 ), - i = cssPrefixes.length; - - while ( i-- ) { - name = cssPrefixes[ i ] + capName; - if ( name in emptyStyle ) { - return name; - } - } -} - -// Return a property mapped along what jQuery.cssProps suggests or to -// a vendor prefixed property. -function finalPropName( name ) { - var ret = jQuery.cssProps[ name ]; - if ( !ret ) { - ret = jQuery.cssProps[ name ] = vendorPropName( name ) || name; - } - return ret; -} - -function setPositiveNumber( elem, value, subtract ) { - - // Any relative (+/-) values have already been - // normalized at this point - var matches = rcssNum.exec( value ); - return matches ? - - // Guard against undefined "subtract", e.g., when used as in cssHooks - Math.max( 0, matches[ 2 ] - ( subtract || 0 ) ) + ( matches[ 3 ] || "px" ) : - value; -} - -function augmentWidthOrHeight( elem, name, extra, isBorderBox, styles ) { - var i, - val = 0; - - // If we already have the right measurement, avoid augmentation - if ( extra === ( isBorderBox ? "border" : "content" ) ) { - i = 4; - - // Otherwise initialize for horizontal or vertical properties - } else { - i = name === "width" ? 1 : 0; - } - - for ( ; i < 4; i += 2 ) { - - // Both box models exclude margin, so add it if we want it - if ( extra === "margin" ) { - val += jQuery.css( elem, extra + cssExpand[ i ], true, styles ); - } - - if ( isBorderBox ) { - - // border-box includes padding, so remove it if we want content - if ( extra === "content" ) { - val -= jQuery.css( elem, "padding" + cssExpand[ i ], true, styles ); - } - - // At this point, extra isn't border nor margin, so remove border - if ( extra !== "margin" ) { - val -= jQuery.css( elem, "border" + cssExpand[ i ] + "Width", true, styles ); - } - } else { - - // At this point, extra isn't content, so add padding - val += jQuery.css( elem, "padding" + cssExpand[ i ], true, styles ); - - // At this point, extra isn't content nor padding, so add border - if ( extra !== "padding" ) { - val += jQuery.css( elem, "border" + cssExpand[ i ] + "Width", true, styles ); - } - } - } - - return val; -} - -function getWidthOrHeight( elem, name, extra ) { - - // Start with computed style - var valueIsBorderBox, - styles = getStyles( elem ), - val = curCSS( elem, name, styles ), - isBorderBox = jQuery.css( elem, "boxSizing", false, styles ) === "border-box"; - - // Computed unit is not pixels. Stop here and return. - if ( rnumnonpx.test( val ) ) { - return val; - } - - // Check for style in case a browser which returns unreliable values - // for getComputedStyle silently falls back to the reliable elem.style - valueIsBorderBox = isBorderBox && - ( support.boxSizingReliable() || val === elem.style[ name ] ); - - // Fall back to offsetWidth/Height when value is "auto" - // This happens for inline elements with no explicit setting (gh-3571) - if ( val === "auto" ) { - val = elem[ "offset" + name[ 0 ].toUpperCase() + name.slice( 1 ) ]; - } - - // Normalize "", auto, and prepare for extra - val = parseFloat( val ) || 0; - - // Use the active box-sizing model to add/subtract irrelevant styles - return ( val + - augmentWidthOrHeight( - elem, - name, - extra || ( isBorderBox ? "border" : "content" ), - valueIsBorderBox, - styles - ) - ) + "px"; -} - -jQuery.extend( { - - // Add in style property hooks for overriding the default - // behavior of getting and setting a style property - cssHooks: { - opacity: { - get: function( elem, computed ) { - if ( computed ) { - - // We should always get a number back from opacity - var ret = curCSS( elem, "opacity" ); - return ret === "" ? "1" : ret; - } - } - } - }, - - // Don't automatically add "px" to these possibly-unitless properties - cssNumber: { - "animationIterationCount": true, - "columnCount": true, - "fillOpacity": true, - "flexGrow": true, - "flexShrink": true, - "fontWeight": true, - "lineHeight": true, - "opacity": true, - "order": true, - "orphans": true, - "widows": true, - "zIndex": true, - "zoom": true - }, - - // Add in properties whose names you wish to fix before - // setting or getting the value - cssProps: { - "float": "cssFloat" - }, - - // Get and set the style property on a DOM Node - style: function( elem, name, value, extra ) { - - // Don't set styles on text and comment nodes - if ( !elem || elem.nodeType === 3 || elem.nodeType === 8 || !elem.style ) { - return; - } - - // Make sure that we're working with the right name - var ret, type, hooks, - origName = jQuery.camelCase( name ), - isCustomProp = rcustomProp.test( name ), - style = elem.style; - - // Make sure that we're working with the right name. We don't - // want to query the value if it is a CSS custom property - // since they are user-defined. - if ( !isCustomProp ) { - name = finalPropName( origName ); - } - - // Gets hook for the prefixed version, then unprefixed version - hooks = jQuery.cssHooks[ name ] || jQuery.cssHooks[ origName ]; - - // Check if we're setting a value - if ( value !== undefined ) { - type = typeof value; - - // Convert "+=" or "-=" to relative numbers (#7345) - if ( type === "string" && ( ret = rcssNum.exec( value ) ) && ret[ 1 ] ) { - value = adjustCSS( elem, name, ret ); - - // Fixes bug #9237 - type = "number"; - } - - // Make sure that null and NaN values aren't set (#7116) - if ( value == null || value !== value ) { - return; - } - - // If a number was passed in, add the unit (except for certain CSS properties) - if ( type === "number" ) { - value += ret && ret[ 3 ] || ( jQuery.cssNumber[ origName ] ? "" : "px" ); - } - - // background-* props affect original clone's values - if ( !support.clearCloneStyle && value === "" && name.indexOf( "background" ) === 0 ) { - style[ name ] = "inherit"; - } - - // If a hook was provided, use that value, otherwise just set the specified value - if ( !hooks || !( "set" in hooks ) || - ( value = hooks.set( elem, value, extra ) ) !== undefined ) { - - if ( isCustomProp ) { - style.setProperty( name, value ); - } else { - style[ name ] = value; - } - } - - } else { - - // If a hook was provided get the non-computed value from there - if ( hooks && "get" in hooks && - ( ret = hooks.get( elem, false, extra ) ) !== undefined ) { - - return ret; - } - - // Otherwise just get the value from the style object - return style[ name ]; - } - }, - - css: function( elem, name, extra, styles ) { - var val, num, hooks, - origName = jQuery.camelCase( name ), - isCustomProp = rcustomProp.test( name ); - - // Make sure that we're working with the right name. We don't - // want to modify the value if it is a CSS custom property - // since they are user-defined. - if ( !isCustomProp ) { - name = finalPropName( origName ); - } - - // Try prefixed name followed by the unprefixed name - hooks = jQuery.cssHooks[ name ] || jQuery.cssHooks[ origName ]; - - // If a hook was provided get the computed value from there - if ( hooks && "get" in hooks ) { - val = hooks.get( elem, true, extra ); - } - - // Otherwise, if a way to get the computed value exists, use that - if ( val === undefined ) { - val = curCSS( elem, name, styles ); - } - - // Convert "normal" to computed value - if ( val === "normal" && name in cssNormalTransform ) { - val = cssNormalTransform[ name ]; - } - - // Make numeric if forced or a qualifier was provided and val looks numeric - if ( extra === "" || extra ) { - num = parseFloat( val ); - return extra === true || isFinite( num ) ? num || 0 : val; - } - - return val; - } -} ); - -jQuery.each( [ "height", "width" ], function( i, name ) { - jQuery.cssHooks[ name ] = { - get: function( elem, computed, extra ) { - if ( computed ) { - - // Certain elements can have dimension info if we invisibly show them - // but it must have a current display style that would benefit - return rdisplayswap.test( jQuery.css( elem, "display" ) ) && - - // Support: Safari 8+ - // Table columns in Safari have non-zero offsetWidth & zero - // getBoundingClientRect().width unless display is changed. - // Support: IE <=11 only - // Running getBoundingClientRect on a disconnected node - // in IE throws an error. - ( !elem.getClientRects().length || !elem.getBoundingClientRect().width ) ? - swap( elem, cssShow, function() { - return getWidthOrHeight( elem, name, extra ); - } ) : - getWidthOrHeight( elem, name, extra ); - } - }, - - set: function( elem, value, extra ) { - var matches, - styles = extra && getStyles( elem ), - subtract = extra && augmentWidthOrHeight( - elem, - name, - extra, - jQuery.css( elem, "boxSizing", false, styles ) === "border-box", - styles - ); - - // Convert to pixels if value adjustment is needed - if ( subtract && ( matches = rcssNum.exec( value ) ) && - ( matches[ 3 ] || "px" ) !== "px" ) { - - elem.style[ name ] = value; - value = jQuery.css( elem, name ); - } - - return setPositiveNumber( elem, value, subtract ); - } - }; -} ); - -jQuery.cssHooks.marginLeft = addGetHookIf( support.reliableMarginLeft, - function( elem, computed ) { - if ( computed ) { - return ( parseFloat( curCSS( elem, "marginLeft" ) ) || - elem.getBoundingClientRect().left - - swap( elem, { marginLeft: 0 }, function() { - return elem.getBoundingClientRect().left; - } ) - ) + "px"; - } - } -); - -// These hooks are used by animate to expand properties -jQuery.each( { - margin: "", - padding: "", - border: "Width" -}, function( prefix, suffix ) { - jQuery.cssHooks[ prefix + suffix ] = { - expand: function( value ) { - var i = 0, - expanded = {}, - - // Assumes a single number if not a string - parts = typeof value === "string" ? value.split( " " ) : [ value ]; - - for ( ; i < 4; i++ ) { - expanded[ prefix + cssExpand[ i ] + suffix ] = - parts[ i ] || parts[ i - 2 ] || parts[ 0 ]; - } - - return expanded; - } - }; - - if ( !rmargin.test( prefix ) ) { - jQuery.cssHooks[ prefix + suffix ].set = setPositiveNumber; - } -} ); - -jQuery.fn.extend( { - css: function( name, value ) { - return access( this, function( elem, name, value ) { - var styles, len, - map = {}, - i = 0; - - if ( Array.isArray( name ) ) { - styles = getStyles( elem ); - len = name.length; - - for ( ; i < len; i++ ) { - map[ name[ i ] ] = jQuery.css( elem, name[ i ], false, styles ); - } - - return map; - } - - return value !== undefined ? - jQuery.style( elem, name, value ) : - jQuery.css( elem, name ); - }, name, value, arguments.length > 1 ); - } -} ); - - -function Tween( elem, options, prop, end, easing ) { - return new Tween.prototype.init( elem, options, prop, end, easing ); -} -jQuery.Tween = Tween; - -Tween.prototype = { - constructor: Tween, - init: function( elem, options, prop, end, easing, unit ) { - this.elem = elem; - this.prop = prop; - this.easing = easing || jQuery.easing._default; - this.options = options; - this.start = this.now = this.cur(); - this.end = end; - this.unit = unit || ( jQuery.cssNumber[ prop ] ? "" : "px" ); - }, - cur: function() { - var hooks = Tween.propHooks[ this.prop ]; - - return hooks && hooks.get ? - hooks.get( this ) : - Tween.propHooks._default.get( this ); - }, - run: function( percent ) { - var eased, - hooks = Tween.propHooks[ this.prop ]; - - if ( this.options.duration ) { - this.pos = eased = jQuery.easing[ this.easing ]( - percent, this.options.duration * percent, 0, 1, this.options.duration - ); - } else { - this.pos = eased = percent; - } - this.now = ( this.end - this.start ) * eased + this.start; - - if ( this.options.step ) { - this.options.step.call( this.elem, this.now, this ); - } - - if ( hooks && hooks.set ) { - hooks.set( this ); - } else { - Tween.propHooks._default.set( this ); - } - return this; - } -}; - -Tween.prototype.init.prototype = Tween.prototype; - -Tween.propHooks = { - _default: { - get: function( tween ) { - var result; - - // Use a property on the element directly when it is not a DOM element, - // or when there is no matching style property that exists. - if ( tween.elem.nodeType !== 1 || - tween.elem[ tween.prop ] != null && tween.elem.style[ tween.prop ] == null ) { - return tween.elem[ tween.prop ]; - } - - // Passing an empty string as a 3rd parameter to .css will automatically - // attempt a parseFloat and fallback to a string if the parse fails. - // Simple values such as "10px" are parsed to Float; - // complex values such as "rotate(1rad)" are returned as-is. - result = jQuery.css( tween.elem, tween.prop, "" ); - - // Empty strings, null, undefined and "auto" are converted to 0. - return !result || result === "auto" ? 0 : result; - }, - set: function( tween ) { - - // Use step hook for back compat. - // Use cssHook if its there. - // Use .style if available and use plain properties where available. - if ( jQuery.fx.step[ tween.prop ] ) { - jQuery.fx.step[ tween.prop ]( tween ); - } else if ( tween.elem.nodeType === 1 && - ( tween.elem.style[ jQuery.cssProps[ tween.prop ] ] != null || - jQuery.cssHooks[ tween.prop ] ) ) { - jQuery.style( tween.elem, tween.prop, tween.now + tween.unit ); - } else { - tween.elem[ tween.prop ] = tween.now; - } - } - } -}; - -// Support: IE <=9 only -// Panic based approach to setting things on disconnected nodes -Tween.propHooks.scrollTop = Tween.propHooks.scrollLeft = { - set: function( tween ) { - if ( tween.elem.nodeType && tween.elem.parentNode ) { - tween.elem[ tween.prop ] = tween.now; - } - } -}; - -jQuery.easing = { - linear: function( p ) { - return p; - }, - swing: function( p ) { - return 0.5 - Math.cos( p * Math.PI ) / 2; - }, - _default: "swing" -}; - -jQuery.fx = Tween.prototype.init; - -// Back compat <1.8 extension point -jQuery.fx.step = {}; - - - - -var - fxNow, inProgress, - rfxtypes = /^(?:toggle|show|hide)$/, - rrun = /queueHooks$/; - -function schedule() { - if ( inProgress ) { - if ( document.hidden === false && window.requestAnimationFrame ) { - window.requestAnimationFrame( schedule ); - } else { - window.setTimeout( schedule, jQuery.fx.interval ); - } - - jQuery.fx.tick(); - } -} - -// Animations created synchronously will run synchronously -function createFxNow() { - window.setTimeout( function() { - fxNow = undefined; - } ); - return ( fxNow = jQuery.now() ); -} - -// Generate parameters to create a standard animation -function genFx( type, includeWidth ) { - var which, - i = 0, - attrs = { height: type }; - - // If we include width, step value is 1 to do all cssExpand values, - // otherwise step value is 2 to skip over Left and Right - includeWidth = includeWidth ? 1 : 0; - for ( ; i < 4; i += 2 - includeWidth ) { - which = cssExpand[ i ]; - attrs[ "margin" + which ] = attrs[ "padding" + which ] = type; - } - - if ( includeWidth ) { - attrs.opacity = attrs.width = type; - } - - return attrs; -} - -function createTween( value, prop, animation ) { - var tween, - collection = ( Animation.tweeners[ prop ] || [] ).concat( Animation.tweeners[ "*" ] ), - index = 0, - length = collection.length; - for ( ; index < length; index++ ) { - if ( ( tween = collection[ index ].call( animation, prop, value ) ) ) { - - // We're done with this property - return tween; - } - } -} - -function defaultPrefilter( elem, props, opts ) { - var prop, value, toggle, hooks, oldfire, propTween, restoreDisplay, display, - isBox = "width" in props || "height" in props, - anim = this, - orig = {}, - style = elem.style, - hidden = elem.nodeType && isHiddenWithinTree( elem ), - dataShow = dataPriv.get( elem, "fxshow" ); - - // Queue-skipping animations hijack the fx hooks - if ( !opts.queue ) { - hooks = jQuery._queueHooks( elem, "fx" ); - if ( hooks.unqueued == null ) { - hooks.unqueued = 0; - oldfire = hooks.empty.fire; - hooks.empty.fire = function() { - if ( !hooks.unqueued ) { - oldfire(); - } - }; - } - hooks.unqueued++; - - anim.always( function() { - - // Ensure the complete handler is called before this completes - anim.always( function() { - hooks.unqueued--; - if ( !jQuery.queue( elem, "fx" ).length ) { - hooks.empty.fire(); - } - } ); - } ); - } - - // Detect show/hide animations - for ( prop in props ) { - value = props[ prop ]; - if ( rfxtypes.test( value ) ) { - delete props[ prop ]; - toggle = toggle || value === "toggle"; - if ( value === ( hidden ? "hide" : "show" ) ) { - - // Pretend to be hidden if this is a "show" and - // there is still data from a stopped show/hide - if ( value === "show" && dataShow && dataShow[ prop ] !== undefined ) { - hidden = true; - - // Ignore all other no-op show/hide data - } else { - continue; - } - } - orig[ prop ] = dataShow && dataShow[ prop ] || jQuery.style( elem, prop ); - } - } - - // Bail out if this is a no-op like .hide().hide() - propTween = !jQuery.isEmptyObject( props ); - if ( !propTween && jQuery.isEmptyObject( orig ) ) { - return; - } - - // Restrict "overflow" and "display" styles during box animations - if ( isBox && elem.nodeType === 1 ) { - - // Support: IE <=9 - 11, Edge 12 - 13 - // Record all 3 overflow attributes because IE does not infer the shorthand - // from identically-valued overflowX and overflowY - opts.overflow = [ style.overflow, style.overflowX, style.overflowY ]; - - // Identify a display type, preferring old show/hide data over the CSS cascade - restoreDisplay = dataShow && dataShow.display; - if ( restoreDisplay == null ) { - restoreDisplay = dataPriv.get( elem, "display" ); - } - display = jQuery.css( elem, "display" ); - if ( display === "none" ) { - if ( restoreDisplay ) { - display = restoreDisplay; - } else { - - // Get nonempty value(s) by temporarily forcing visibility - showHide( [ elem ], true ); - restoreDisplay = elem.style.display || restoreDisplay; - display = jQuery.css( elem, "display" ); - showHide( [ elem ] ); - } - } - - // Animate inline elements as inline-block - if ( display === "inline" || display === "inline-block" && restoreDisplay != null ) { - if ( jQuery.css( elem, "float" ) === "none" ) { - - // Restore the original display value at the end of pure show/hide animations - if ( !propTween ) { - anim.done( function() { - style.display = restoreDisplay; - } ); - if ( restoreDisplay == null ) { - display = style.display; - restoreDisplay = display === "none" ? "" : display; - } - } - style.display = "inline-block"; - } - } - } - - if ( opts.overflow ) { - style.overflow = "hidden"; - anim.always( function() { - style.overflow = opts.overflow[ 0 ]; - style.overflowX = opts.overflow[ 1 ]; - style.overflowY = opts.overflow[ 2 ]; - } ); - } - - // Implement show/hide animations - propTween = false; - for ( prop in orig ) { - - // General show/hide setup for this element animation - if ( !propTween ) { - if ( dataShow ) { - if ( "hidden" in dataShow ) { - hidden = dataShow.hidden; - } - } else { - dataShow = dataPriv.access( elem, "fxshow", { display: restoreDisplay } ); - } - - // Store hidden/visible for toggle so `.stop().toggle()` "reverses" - if ( toggle ) { - dataShow.hidden = !hidden; - } - - // Show elements before animating them - if ( hidden ) { - showHide( [ elem ], true ); - } - - /* eslint-disable no-loop-func */ - - anim.done( function() { - - /* eslint-enable no-loop-func */ - - // The final step of a "hide" animation is actually hiding the element - if ( !hidden ) { - showHide( [ elem ] ); - } - dataPriv.remove( elem, "fxshow" ); - for ( prop in orig ) { - jQuery.style( elem, prop, orig[ prop ] ); - } - } ); - } - - // Per-property setup - propTween = createTween( hidden ? dataShow[ prop ] : 0, prop, anim ); - if ( !( prop in dataShow ) ) { - dataShow[ prop ] = propTween.start; - if ( hidden ) { - propTween.end = propTween.start; - propTween.start = 0; - } - } - } -} - -function propFilter( props, specialEasing ) { - var index, name, easing, value, hooks; - - // camelCase, specialEasing and expand cssHook pass - for ( index in props ) { - name = jQuery.camelCase( index ); - easing = specialEasing[ name ]; - value = props[ index ]; - if ( Array.isArray( value ) ) { - easing = value[ 1 ]; - value = props[ index ] = value[ 0 ]; - } - - if ( index !== name ) { - props[ name ] = value; - delete props[ index ]; - } - - hooks = jQuery.cssHooks[ name ]; - if ( hooks && "expand" in hooks ) { - value = hooks.expand( value ); - delete props[ name ]; - - // Not quite $.extend, this won't overwrite existing keys. - // Reusing 'index' because we have the correct "name" - for ( index in value ) { - if ( !( index in props ) ) { - props[ index ] = value[ index ]; - specialEasing[ index ] = easing; - } - } - } else { - specialEasing[ name ] = easing; - } - } -} - -function Animation( elem, properties, options ) { - var result, - stopped, - index = 0, - length = Animation.prefilters.length, - deferred = jQuery.Deferred().always( function() { - - // Don't match elem in the :animated selector - delete tick.elem; - } ), - tick = function() { - if ( stopped ) { - return false; - } - var currentTime = fxNow || createFxNow(), - remaining = Math.max( 0, animation.startTime + animation.duration - currentTime ), - - // Support: Android 2.3 only - // Archaic crash bug won't allow us to use `1 - ( 0.5 || 0 )` (#12497) - temp = remaining / animation.duration || 0, - percent = 1 - temp, - index = 0, - length = animation.tweens.length; - - for ( ; index < length; index++ ) { - animation.tweens[ index ].run( percent ); - } - - deferred.notifyWith( elem, [ animation, percent, remaining ] ); - - // If there's more to do, yield - if ( percent < 1 && length ) { - return remaining; - } - - // If this was an empty animation, synthesize a final progress notification - if ( !length ) { - deferred.notifyWith( elem, [ animation, 1, 0 ] ); - } - - // Resolve the animation and report its conclusion - deferred.resolveWith( elem, [ animation ] ); - return false; - }, - animation = deferred.promise( { - elem: elem, - props: jQuery.extend( {}, properties ), - opts: jQuery.extend( true, { - specialEasing: {}, - easing: jQuery.easing._default - }, options ), - originalProperties: properties, - originalOptions: options, - startTime: fxNow || createFxNow(), - duration: options.duration, - tweens: [], - createTween: function( prop, end ) { - var tween = jQuery.Tween( elem, animation.opts, prop, end, - animation.opts.specialEasing[ prop ] || animation.opts.easing ); - animation.tweens.push( tween ); - return tween; - }, - stop: function( gotoEnd ) { - var index = 0, - - // If we are going to the end, we want to run all the tweens - // otherwise we skip this part - length = gotoEnd ? animation.tweens.length : 0; - if ( stopped ) { - return this; - } - stopped = true; - for ( ; index < length; index++ ) { - animation.tweens[ index ].run( 1 ); - } - - // Resolve when we played the last frame; otherwise, reject - if ( gotoEnd ) { - deferred.notifyWith( elem, [ animation, 1, 0 ] ); - deferred.resolveWith( elem, [ animation, gotoEnd ] ); - } else { - deferred.rejectWith( elem, [ animation, gotoEnd ] ); - } - return this; - } - } ), - props = animation.props; - - propFilter( props, animation.opts.specialEasing ); - - for ( ; index < length; index++ ) { - result = Animation.prefilters[ index ].call( animation, elem, props, animation.opts ); - if ( result ) { - if ( jQuery.isFunction( result.stop ) ) { - jQuery._queueHooks( animation.elem, animation.opts.queue ).stop = - jQuery.proxy( result.stop, result ); - } - return result; - } - } - - jQuery.map( props, createTween, animation ); - - if ( jQuery.isFunction( animation.opts.start ) ) { - animation.opts.start.call( elem, animation ); - } - - // Attach callbacks from options - animation - .progress( animation.opts.progress ) - .done( animation.opts.done, animation.opts.complete ) - .fail( animation.opts.fail ) - .always( animation.opts.always ); - - jQuery.fx.timer( - jQuery.extend( tick, { - elem: elem, - anim: animation, - queue: animation.opts.queue - } ) - ); - - return animation; -} - -jQuery.Animation = jQuery.extend( Animation, { - - tweeners: { - "*": [ function( prop, value ) { - var tween = this.createTween( prop, value ); - adjustCSS( tween.elem, prop, rcssNum.exec( value ), tween ); - return tween; - } ] - }, - - tweener: function( props, callback ) { - if ( jQuery.isFunction( props ) ) { - callback = props; - props = [ "*" ]; - } else { - props = props.match( rnothtmlwhite ); - } - - var prop, - index = 0, - length = props.length; - - for ( ; index < length; index++ ) { - prop = props[ index ]; - Animation.tweeners[ prop ] = Animation.tweeners[ prop ] || []; - Animation.tweeners[ prop ].unshift( callback ); - } - }, - - prefilters: [ defaultPrefilter ], - - prefilter: function( callback, prepend ) { - if ( prepend ) { - Animation.prefilters.unshift( callback ); - } else { - Animation.prefilters.push( callback ); - } - } -} ); - -jQuery.speed = function( speed, easing, fn ) { - var opt = speed && typeof speed === "object" ? jQuery.extend( {}, speed ) : { - complete: fn || !fn && easing || - jQuery.isFunction( speed ) && speed, - duration: speed, - easing: fn && easing || easing && !jQuery.isFunction( easing ) && easing - }; - - // Go to the end state if fx are off - if ( jQuery.fx.off ) { - opt.duration = 0; - - } else { - if ( typeof opt.duration !== "number" ) { - if ( opt.duration in jQuery.fx.speeds ) { - opt.duration = jQuery.fx.speeds[ opt.duration ]; - - } else { - opt.duration = jQuery.fx.speeds._default; - } - } - } - - // Normalize opt.queue - true/undefined/null -> "fx" - if ( opt.queue == null || opt.queue === true ) { - opt.queue = "fx"; - } - - // Queueing - opt.old = opt.complete; - - opt.complete = function() { - if ( jQuery.isFunction( opt.old ) ) { - opt.old.call( this ); - } - - if ( opt.queue ) { - jQuery.dequeue( this, opt.queue ); - } - }; - - return opt; -}; - -jQuery.fn.extend( { - fadeTo: function( speed, to, easing, callback ) { - - // Show any hidden elements after setting opacity to 0 - return this.filter( isHiddenWithinTree ).css( "opacity", 0 ).show() - - // Animate to the value specified - .end().animate( { opacity: to }, speed, easing, callback ); - }, - animate: function( prop, speed, easing, callback ) { - var empty = jQuery.isEmptyObject( prop ), - optall = jQuery.speed( speed, easing, callback ), - doAnimation = function() { - - // Operate on a copy of prop so per-property easing won't be lost - var anim = Animation( this, jQuery.extend( {}, prop ), optall ); - - // Empty animations, or finishing resolves immediately - if ( empty || dataPriv.get( this, "finish" ) ) { - anim.stop( true ); - } - }; - doAnimation.finish = doAnimation; - - return empty || optall.queue === false ? - this.each( doAnimation ) : - this.queue( optall.queue, doAnimation ); - }, - stop: function( type, clearQueue, gotoEnd ) { - var stopQueue = function( hooks ) { - var stop = hooks.stop; - delete hooks.stop; - stop( gotoEnd ); - }; - - if ( typeof type !== "string" ) { - gotoEnd = clearQueue; - clearQueue = type; - type = undefined; - } - if ( clearQueue && type !== false ) { - this.queue( type || "fx", [] ); - } - - return this.each( function() { - var dequeue = true, - index = type != null && type + "queueHooks", - timers = jQuery.timers, - data = dataPriv.get( this ); - - if ( index ) { - if ( data[ index ] && data[ index ].stop ) { - stopQueue( data[ index ] ); - } - } else { - for ( index in data ) { - if ( data[ index ] && data[ index ].stop && rrun.test( index ) ) { - stopQueue( data[ index ] ); - } - } - } - - for ( index = timers.length; index--; ) { - if ( timers[ index ].elem === this && - ( type == null || timers[ index ].queue === type ) ) { - - timers[ index ].anim.stop( gotoEnd ); - dequeue = false; - timers.splice( index, 1 ); - } - } - - // Start the next in the queue if the last step wasn't forced. - // Timers currently will call their complete callbacks, which - // will dequeue but only if they were gotoEnd. - if ( dequeue || !gotoEnd ) { - jQuery.dequeue( this, type ); - } - } ); - }, - finish: function( type ) { - if ( type !== false ) { - type = type || "fx"; - } - return this.each( function() { - var index, - data = dataPriv.get( this ), - queue = data[ type + "queue" ], - hooks = data[ type + "queueHooks" ], - timers = jQuery.timers, - length = queue ? queue.length : 0; - - // Enable finishing flag on private data - data.finish = true; - - // Empty the queue first - jQuery.queue( this, type, [] ); - - if ( hooks && hooks.stop ) { - hooks.stop.call( this, true ); - } - - // Look for any active animations, and finish them - for ( index = timers.length; index--; ) { - if ( timers[ index ].elem === this && timers[ index ].queue === type ) { - timers[ index ].anim.stop( true ); - timers.splice( index, 1 ); - } - } - - // Look for any animations in the old queue and finish them - for ( index = 0; index < length; index++ ) { - if ( queue[ index ] && queue[ index ].finish ) { - queue[ index ].finish.call( this ); - } - } - - // Turn off finishing flag - delete data.finish; - } ); - } -} ); - -jQuery.each( [ "toggle", "show", "hide" ], function( i, name ) { - var cssFn = jQuery.fn[ name ]; - jQuery.fn[ name ] = function( speed, easing, callback ) { - return speed == null || typeof speed === "boolean" ? - cssFn.apply( this, arguments ) : - this.animate( genFx( name, true ), speed, easing, callback ); - }; -} ); - -// Generate shortcuts for custom animations -jQuery.each( { - slideDown: genFx( "show" ), - slideUp: genFx( "hide" ), - slideToggle: genFx( "toggle" ), - fadeIn: { opacity: "show" }, - fadeOut: { opacity: "hide" }, - fadeToggle: { opacity: "toggle" } -}, function( name, props ) { - jQuery.fn[ name ] = function( speed, easing, callback ) { - return this.animate( props, speed, easing, callback ); - }; -} ); - -jQuery.timers = []; -jQuery.fx.tick = function() { - var timer, - i = 0, - timers = jQuery.timers; - - fxNow = jQuery.now(); - - for ( ; i < timers.length; i++ ) { - timer = timers[ i ]; - - // Run the timer and safely remove it when done (allowing for external removal) - if ( !timer() && timers[ i ] === timer ) { - timers.splice( i--, 1 ); - } - } - - if ( !timers.length ) { - jQuery.fx.stop(); - } - fxNow = undefined; -}; - -jQuery.fx.timer = function( timer ) { - jQuery.timers.push( timer ); - jQuery.fx.start(); -}; - -jQuery.fx.interval = 13; -jQuery.fx.start = function() { - if ( inProgress ) { - return; - } - - inProgress = true; - schedule(); -}; - -jQuery.fx.stop = function() { - inProgress = null; -}; - -jQuery.fx.speeds = { - slow: 600, - fast: 200, - - // Default speed - _default: 400 -}; - - -// Based off of the plugin by Clint Helfers, with permission. -// https://web.archive.org/web/20100324014747/http://blindsignals.com/index.php/2009/07/jquery-delay/ -jQuery.fn.delay = function( time, type ) { - time = jQuery.fx ? jQuery.fx.speeds[ time ] || time : time; - type = type || "fx"; - - return this.queue( type, function( next, hooks ) { - var timeout = window.setTimeout( next, time ); - hooks.stop = function() { - window.clearTimeout( timeout ); - }; - } ); -}; - - -( function() { - var input = document.createElement( "input" ), - select = document.createElement( "select" ), - opt = select.appendChild( document.createElement( "option" ) ); - - input.type = "checkbox"; - - // Support: Android <=4.3 only - // Default value for a checkbox should be "on" - support.checkOn = input.value !== ""; - - // Support: IE <=11 only - // Must access selectedIndex to make default options select - support.optSelected = opt.selected; - - // Support: IE <=11 only - // An input loses its value after becoming a radio - input = document.createElement( "input" ); - input.value = "t"; - input.type = "radio"; - support.radioValue = input.value === "t"; -} )(); - - -var boolHook, - attrHandle = jQuery.expr.attrHandle; - -jQuery.fn.extend( { - attr: function( name, value ) { - return access( this, jQuery.attr, name, value, arguments.length > 1 ); - }, - - removeAttr: function( name ) { - return this.each( function() { - jQuery.removeAttr( this, name ); - } ); - } -} ); - -jQuery.extend( { - attr: function( elem, name, value ) { - var ret, hooks, - nType = elem.nodeType; - - // Don't get/set attributes on text, comment and attribute nodes - if ( nType === 3 || nType === 8 || nType === 2 ) { - return; - } - - // Fallback to prop when attributes are not supported - if ( typeof elem.getAttribute === "undefined" ) { - return jQuery.prop( elem, name, value ); - } - - // Attribute hooks are determined by the lowercase version - // Grab necessary hook if one is defined - if ( nType !== 1 || !jQuery.isXMLDoc( elem ) ) { - hooks = jQuery.attrHooks[ name.toLowerCase() ] || - ( jQuery.expr.match.bool.test( name ) ? boolHook : undefined ); - } - - if ( value !== undefined ) { - if ( value === null ) { - jQuery.removeAttr( elem, name ); - return; - } - - if ( hooks && "set" in hooks && - ( ret = hooks.set( elem, value, name ) ) !== undefined ) { - return ret; - } - - elem.setAttribute( name, value + "" ); - return value; - } - - if ( hooks && "get" in hooks && ( ret = hooks.get( elem, name ) ) !== null ) { - return ret; - } - - ret = jQuery.find.attr( elem, name ); - - // Non-existent attributes return null, we normalize to undefined - return ret == null ? undefined : ret; - }, - - attrHooks: { - type: { - set: function( elem, value ) { - if ( !support.radioValue && value === "radio" && - nodeName( elem, "input" ) ) { - var val = elem.value; - elem.setAttribute( "type", value ); - if ( val ) { - elem.value = val; - } - return value; - } - } - } - }, - - removeAttr: function( elem, value ) { - var name, - i = 0, - - // Attribute names can contain non-HTML whitespace characters - // https://html.spec.whatwg.org/multipage/syntax.html#attributes-2 - attrNames = value && value.match( rnothtmlwhite ); - - if ( attrNames && elem.nodeType === 1 ) { - while ( ( name = attrNames[ i++ ] ) ) { - elem.removeAttribute( name ); - } - } - } -} ); - -// Hooks for boolean attributes -boolHook = { - set: function( elem, value, name ) { - if ( value === false ) { - - // Remove boolean attributes when set to false - jQuery.removeAttr( elem, name ); - } else { - elem.setAttribute( name, name ); - } - return name; - } -}; - -jQuery.each( jQuery.expr.match.bool.source.match( /\w+/g ), function( i, name ) { - var getter = attrHandle[ name ] || jQuery.find.attr; - - attrHandle[ name ] = function( elem, name, isXML ) { - var ret, handle, - lowercaseName = name.toLowerCase(); - - if ( !isXML ) { - - // Avoid an infinite loop by temporarily removing this function from the getter - handle = attrHandle[ lowercaseName ]; - attrHandle[ lowercaseName ] = ret; - ret = getter( elem, name, isXML ) != null ? - lowercaseName : - null; - attrHandle[ lowercaseName ] = handle; - } - return ret; - }; -} ); - - - - -var rfocusable = /^(?:input|select|textarea|button)$/i, - rclickable = /^(?:a|area)$/i; - -jQuery.fn.extend( { - prop: function( name, value ) { - return access( this, jQuery.prop, name, value, arguments.length > 1 ); - }, - - removeProp: function( name ) { - return this.each( function() { - delete this[ jQuery.propFix[ name ] || name ]; - } ); - } -} ); - -jQuery.extend( { - prop: function( elem, name, value ) { - var ret, hooks, - nType = elem.nodeType; - - // Don't get/set properties on text, comment and attribute nodes - if ( nType === 3 || nType === 8 || nType === 2 ) { - return; - } - - if ( nType !== 1 || !jQuery.isXMLDoc( elem ) ) { - - // Fix name and attach hooks - name = jQuery.propFix[ name ] || name; - hooks = jQuery.propHooks[ name ]; - } - - if ( value !== undefined ) { - if ( hooks && "set" in hooks && - ( ret = hooks.set( elem, value, name ) ) !== undefined ) { - return ret; - } - - return ( elem[ name ] = value ); - } - - if ( hooks && "get" in hooks && ( ret = hooks.get( elem, name ) ) !== null ) { - return ret; - } - - return elem[ name ]; - }, - - propHooks: { - tabIndex: { - get: function( elem ) { - - // Support: IE <=9 - 11 only - // elem.tabIndex doesn't always return the - // correct value when it hasn't been explicitly set - // https://web.archive.org/web/20141116233347/http://fluidproject.org/blog/2008/01/09/getting-setting-and-removing-tabindex-values-with-javascript/ - // Use proper attribute retrieval(#12072) - var tabindex = jQuery.find.attr( elem, "tabindex" ); - - if ( tabindex ) { - return parseInt( tabindex, 10 ); - } - - if ( - rfocusable.test( elem.nodeName ) || - rclickable.test( elem.nodeName ) && - elem.href - ) { - return 0; - } - - return -1; - } - } - }, - - propFix: { - "for": "htmlFor", - "class": "className" - } -} ); - -// Support: IE <=11 only -// Accessing the selectedIndex property -// forces the browser to respect setting selected -// on the option -// The getter ensures a default option is selected -// when in an optgroup -// eslint rule "no-unused-expressions" is disabled for this code -// since it considers such accessions noop -if ( !support.optSelected ) { - jQuery.propHooks.selected = { - get: function( elem ) { - - /* eslint no-unused-expressions: "off" */ - - var parent = elem.parentNode; - if ( parent && parent.parentNode ) { - parent.parentNode.selectedIndex; - } - return null; - }, - set: function( elem ) { - - /* eslint no-unused-expressions: "off" */ - - var parent = elem.parentNode; - if ( parent ) { - parent.selectedIndex; - - if ( parent.parentNode ) { - parent.parentNode.selectedIndex; - } - } - } - }; -} - -jQuery.each( [ - "tabIndex", - "readOnly", - "maxLength", - "cellSpacing", - "cellPadding", - "rowSpan", - "colSpan", - "useMap", - "frameBorder", - "contentEditable" -], function() { - jQuery.propFix[ this.toLowerCase() ] = this; -} ); - - - - - // Strip and collapse whitespace according to HTML spec - // https://html.spec.whatwg.org/multipage/infrastructure.html#strip-and-collapse-whitespace - function stripAndCollapse( value ) { - var tokens = value.match( rnothtmlwhite ) || []; - return tokens.join( " " ); - } - - -function getClass( elem ) { - return elem.getAttribute && elem.getAttribute( "class" ) || ""; -} - -jQuery.fn.extend( { - addClass: function( value ) { - var classes, elem, cur, curValue, clazz, j, finalValue, - i = 0; - - if ( jQuery.isFunction( value ) ) { - return this.each( function( j ) { - jQuery( this ).addClass( value.call( this, j, getClass( this ) ) ); - } ); - } - - if ( typeof value === "string" && value ) { - classes = value.match( rnothtmlwhite ) || []; - - while ( ( elem = this[ i++ ] ) ) { - curValue = getClass( elem ); - cur = elem.nodeType === 1 && ( " " + stripAndCollapse( curValue ) + " " ); - - if ( cur ) { - j = 0; - while ( ( clazz = classes[ j++ ] ) ) { - if ( cur.indexOf( " " + clazz + " " ) < 0 ) { - cur += clazz + " "; - } - } - - // Only assign if different to avoid unneeded rendering. - finalValue = stripAndCollapse( cur ); - if ( curValue !== finalValue ) { - elem.setAttribute( "class", finalValue ); - } - } - } - } - - return this; - }, - - removeClass: function( value ) { - var classes, elem, cur, curValue, clazz, j, finalValue, - i = 0; - - if ( jQuery.isFunction( value ) ) { - return this.each( function( j ) { - jQuery( this ).removeClass( value.call( this, j, getClass( this ) ) ); - } ); - } - - if ( !arguments.length ) { - return this.attr( "class", "" ); - } - - if ( typeof value === "string" && value ) { - classes = value.match( rnothtmlwhite ) || []; - - while ( ( elem = this[ i++ ] ) ) { - curValue = getClass( elem ); - - // This expression is here for better compressibility (see addClass) - cur = elem.nodeType === 1 && ( " " + stripAndCollapse( curValue ) + " " ); - - if ( cur ) { - j = 0; - while ( ( clazz = classes[ j++ ] ) ) { - - // Remove *all* instances - while ( cur.indexOf( " " + clazz + " " ) > -1 ) { - cur = cur.replace( " " + clazz + " ", " " ); - } - } - - // Only assign if different to avoid unneeded rendering. - finalValue = stripAndCollapse( cur ); - if ( curValue !== finalValue ) { - elem.setAttribute( "class", finalValue ); - } - } - } - } - - return this; - }, - - toggleClass: function( value, stateVal ) { - var type = typeof value; - - if ( typeof stateVal === "boolean" && type === "string" ) { - return stateVal ? this.addClass( value ) : this.removeClass( value ); - } - - if ( jQuery.isFunction( value ) ) { - return this.each( function( i ) { - jQuery( this ).toggleClass( - value.call( this, i, getClass( this ), stateVal ), - stateVal - ); - } ); - } - - return this.each( function() { - var className, i, self, classNames; - - if ( type === "string" ) { - - // Toggle individual class names - i = 0; - self = jQuery( this ); - classNames = value.match( rnothtmlwhite ) || []; - - while ( ( className = classNames[ i++ ] ) ) { - - // Check each className given, space separated list - if ( self.hasClass( className ) ) { - self.removeClass( className ); - } else { - self.addClass( className ); - } - } - - // Toggle whole class name - } else if ( value === undefined || type === "boolean" ) { - className = getClass( this ); - if ( className ) { - - // Store className if set - dataPriv.set( this, "__className__", className ); - } - - // If the element has a class name or if we're passed `false`, - // then remove the whole classname (if there was one, the above saved it). - // Otherwise bring back whatever was previously saved (if anything), - // falling back to the empty string if nothing was stored. - if ( this.setAttribute ) { - this.setAttribute( "class", - className || value === false ? - "" : - dataPriv.get( this, "__className__" ) || "" - ); - } - } - } ); - }, - - hasClass: function( selector ) { - var className, elem, - i = 0; - - className = " " + selector + " "; - while ( ( elem = this[ i++ ] ) ) { - if ( elem.nodeType === 1 && - ( " " + stripAndCollapse( getClass( elem ) ) + " " ).indexOf( className ) > -1 ) { - return true; - } - } - - return false; - } -} ); - - - - -var rreturn = /\r/g; - -jQuery.fn.extend( { - val: function( value ) { - var hooks, ret, isFunction, - elem = this[ 0 ]; - - if ( !arguments.length ) { - if ( elem ) { - hooks = jQuery.valHooks[ elem.type ] || - jQuery.valHooks[ elem.nodeName.toLowerCase() ]; - - if ( hooks && - "get" in hooks && - ( ret = hooks.get( elem, "value" ) ) !== undefined - ) { - return ret; - } - - ret = elem.value; - - // Handle most common string cases - if ( typeof ret === "string" ) { - return ret.replace( rreturn, "" ); - } - - // Handle cases where value is null/undef or number - return ret == null ? "" : ret; - } - - return; - } - - isFunction = jQuery.isFunction( value ); - - return this.each( function( i ) { - var val; - - if ( this.nodeType !== 1 ) { - return; - } - - if ( isFunction ) { - val = value.call( this, i, jQuery( this ).val() ); - } else { - val = value; - } - - // Treat null/undefined as ""; convert numbers to string - if ( val == null ) { - val = ""; - - } else if ( typeof val === "number" ) { - val += ""; - - } else if ( Array.isArray( val ) ) { - val = jQuery.map( val, function( value ) { - return value == null ? "" : value + ""; - } ); - } - - hooks = jQuery.valHooks[ this.type ] || jQuery.valHooks[ this.nodeName.toLowerCase() ]; - - // If set returns undefined, fall back to normal setting - if ( !hooks || !( "set" in hooks ) || hooks.set( this, val, "value" ) === undefined ) { - this.value = val; - } - } ); - } -} ); - -jQuery.extend( { - valHooks: { - option: { - get: function( elem ) { - - var val = jQuery.find.attr( elem, "value" ); - return val != null ? - val : - - // Support: IE <=10 - 11 only - // option.text throws exceptions (#14686, #14858) - // Strip and collapse whitespace - // https://html.spec.whatwg.org/#strip-and-collapse-whitespace - stripAndCollapse( jQuery.text( elem ) ); - } - }, - select: { - get: function( elem ) { - var value, option, i, - options = elem.options, - index = elem.selectedIndex, - one = elem.type === "select-one", - values = one ? null : [], - max = one ? index + 1 : options.length; - - if ( index < 0 ) { - i = max; - - } else { - i = one ? index : 0; - } - - // Loop through all the selected options - for ( ; i < max; i++ ) { - option = options[ i ]; - - // Support: IE <=9 only - // IE8-9 doesn't update selected after form reset (#2551) - if ( ( option.selected || i === index ) && - - // Don't return options that are disabled or in a disabled optgroup - !option.disabled && - ( !option.parentNode.disabled || - !nodeName( option.parentNode, "optgroup" ) ) ) { - - // Get the specific value for the option - value = jQuery( option ).val(); - - // We don't need an array for one selects - if ( one ) { - return value; - } - - // Multi-Selects return an array - values.push( value ); - } - } - - return values; - }, - - set: function( elem, value ) { - var optionSet, option, - options = elem.options, - values = jQuery.makeArray( value ), - i = options.length; - - while ( i-- ) { - option = options[ i ]; - - /* eslint-disable no-cond-assign */ - - if ( option.selected = - jQuery.inArray( jQuery.valHooks.option.get( option ), values ) > -1 - ) { - optionSet = true; - } - - /* eslint-enable no-cond-assign */ - } - - // Force browsers to behave consistently when non-matching value is set - if ( !optionSet ) { - elem.selectedIndex = -1; - } - return values; - } - } - } -} ); - -// Radios and checkboxes getter/setter -jQuery.each( [ "radio", "checkbox" ], function() { - jQuery.valHooks[ this ] = { - set: function( elem, value ) { - if ( Array.isArray( value ) ) { - return ( elem.checked = jQuery.inArray( jQuery( elem ).val(), value ) > -1 ); - } - } - }; - if ( !support.checkOn ) { - jQuery.valHooks[ this ].get = function( elem ) { - return elem.getAttribute( "value" ) === null ? "on" : elem.value; - }; - } -} ); - - - - -// Return jQuery for attributes-only inclusion - - -var rfocusMorph = /^(?:focusinfocus|focusoutblur)$/; - -jQuery.extend( jQuery.event, { - - trigger: function( event, data, elem, onlyHandlers ) { - - var i, cur, tmp, bubbleType, ontype, handle, special, - eventPath = [ elem || document ], - type = hasOwn.call( event, "type" ) ? event.type : event, - namespaces = hasOwn.call( event, "namespace" ) ? event.namespace.split( "." ) : []; - - cur = tmp = elem = elem || document; - - // Don't do events on text and comment nodes - if ( elem.nodeType === 3 || elem.nodeType === 8 ) { - return; - } - - // focus/blur morphs to focusin/out; ensure we're not firing them right now - if ( rfocusMorph.test( type + jQuery.event.triggered ) ) { - return; - } - - if ( type.indexOf( "." ) > -1 ) { - - // Namespaced trigger; create a regexp to match event type in handle() - namespaces = type.split( "." ); - type = namespaces.shift(); - namespaces.sort(); - } - ontype = type.indexOf( ":" ) < 0 && "on" + type; - - // Caller can pass in a jQuery.Event object, Object, or just an event type string - event = event[ jQuery.expando ] ? - event : - new jQuery.Event( type, typeof event === "object" && event ); - - // Trigger bitmask: & 1 for native handlers; & 2 for jQuery (always true) - event.isTrigger = onlyHandlers ? 2 : 3; - event.namespace = namespaces.join( "." ); - event.rnamespace = event.namespace ? - new RegExp( "(^|\\.)" + namespaces.join( "\\.(?:.*\\.|)" ) + "(\\.|$)" ) : - null; - - // Clean up the event in case it is being reused - event.result = undefined; - if ( !event.target ) { - event.target = elem; - } - - // Clone any incoming data and prepend the event, creating the handler arg list - data = data == null ? - [ event ] : - jQuery.makeArray( data, [ event ] ); - - // Allow special events to draw outside the lines - special = jQuery.event.special[ type ] || {}; - if ( !onlyHandlers && special.trigger && special.trigger.apply( elem, data ) === false ) { - return; - } - - // Determine event propagation path in advance, per W3C events spec (#9951) - // Bubble up to document, then to window; watch for a global ownerDocument var (#9724) - if ( !onlyHandlers && !special.noBubble && !jQuery.isWindow( elem ) ) { - - bubbleType = special.delegateType || type; - if ( !rfocusMorph.test( bubbleType + type ) ) { - cur = cur.parentNode; - } - for ( ; cur; cur = cur.parentNode ) { - eventPath.push( cur ); - tmp = cur; - } - - // Only add window if we got to document (e.g., not plain obj or detached DOM) - if ( tmp === ( elem.ownerDocument || document ) ) { - eventPath.push( tmp.defaultView || tmp.parentWindow || window ); - } - } - - // Fire handlers on the event path - i = 0; - while ( ( cur = eventPath[ i++ ] ) && !event.isPropagationStopped() ) { - - event.type = i > 1 ? - bubbleType : - special.bindType || type; - - // jQuery handler - handle = ( dataPriv.get( cur, "events" ) || {} )[ event.type ] && - dataPriv.get( cur, "handle" ); - if ( handle ) { - handle.apply( cur, data ); - } - - // Native handler - handle = ontype && cur[ ontype ]; - if ( handle && handle.apply && acceptData( cur ) ) { - event.result = handle.apply( cur, data ); - if ( event.result === false ) { - event.preventDefault(); - } - } - } - event.type = type; - - // If nobody prevented the default action, do it now - if ( !onlyHandlers && !event.isDefaultPrevented() ) { - - if ( ( !special._default || - special._default.apply( eventPath.pop(), data ) === false ) && - acceptData( elem ) ) { - - // Call a native DOM method on the target with the same name as the event. - // Don't do default actions on window, that's where global variables be (#6170) - if ( ontype && jQuery.isFunction( elem[ type ] ) && !jQuery.isWindow( elem ) ) { - - // Don't re-trigger an onFOO event when we call its FOO() method - tmp = elem[ ontype ]; - - if ( tmp ) { - elem[ ontype ] = null; - } - - // Prevent re-triggering of the same event, since we already bubbled it above - jQuery.event.triggered = type; - elem[ type ](); - jQuery.event.triggered = undefined; - - if ( tmp ) { - elem[ ontype ] = tmp; - } - } - } - } - - return event.result; - }, - - // Piggyback on a donor event to simulate a different one - // Used only for `focus(in | out)` events - simulate: function( type, elem, event ) { - var e = jQuery.extend( - new jQuery.Event(), - event, - { - type: type, - isSimulated: true - } - ); - - jQuery.event.trigger( e, null, elem ); - } - -} ); - -jQuery.fn.extend( { - - trigger: function( type, data ) { - return this.each( function() { - jQuery.event.trigger( type, data, this ); - } ); - }, - triggerHandler: function( type, data ) { - var elem = this[ 0 ]; - if ( elem ) { - return jQuery.event.trigger( type, data, elem, true ); - } - } -} ); - - -jQuery.each( ( "blur focus focusin focusout resize scroll click dblclick " + - "mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave " + - "change select submit keydown keypress keyup contextmenu" ).split( " " ), - function( i, name ) { - - // Handle event binding - jQuery.fn[ name ] = function( data, fn ) { - return arguments.length > 0 ? - this.on( name, null, data, fn ) : - this.trigger( name ); - }; -} ); - -jQuery.fn.extend( { - hover: function( fnOver, fnOut ) { - return this.mouseenter( fnOver ).mouseleave( fnOut || fnOver ); - } -} ); - - - - -support.focusin = "onfocusin" in window; - - -// Support: Firefox <=44 -// Firefox doesn't have focus(in | out) events -// Related ticket - https://bugzilla.mozilla.org/show_bug.cgi?id=687787 -// -// Support: Chrome <=48 - 49, Safari <=9.0 - 9.1 -// focus(in | out) events fire after focus & blur events, -// which is spec violation - http://www.w3.org/TR/DOM-Level-3-Events/#events-focusevent-event-order -// Related ticket - https://bugs.chromium.org/p/chromium/issues/detail?id=449857 -if ( !support.focusin ) { - jQuery.each( { focus: "focusin", blur: "focusout" }, function( orig, fix ) { - - // Attach a single capturing handler on the document while someone wants focusin/focusout - var handler = function( event ) { - jQuery.event.simulate( fix, event.target, jQuery.event.fix( event ) ); - }; - - jQuery.event.special[ fix ] = { - setup: function() { - var doc = this.ownerDocument || this, - attaches = dataPriv.access( doc, fix ); - - if ( !attaches ) { - doc.addEventListener( orig, handler, true ); - } - dataPriv.access( doc, fix, ( attaches || 0 ) + 1 ); - }, - teardown: function() { - var doc = this.ownerDocument || this, - attaches = dataPriv.access( doc, fix ) - 1; - - if ( !attaches ) { - doc.removeEventListener( orig, handler, true ); - dataPriv.remove( doc, fix ); - - } else { - dataPriv.access( doc, fix, attaches ); - } - } - }; - } ); -} -var location = window.location; - -var nonce = jQuery.now(); - -var rquery = ( /\?/ ); - - - -// Cross-browser xml parsing -jQuery.parseXML = function( data ) { - var xml; - if ( !data || typeof data !== "string" ) { - return null; - } - - // Support: IE 9 - 11 only - // IE throws on parseFromString with invalid input. - try { - xml = ( new window.DOMParser() ).parseFromString( data, "text/xml" ); - } catch ( e ) { - xml = undefined; - } - - if ( !xml || xml.getElementsByTagName( "parsererror" ).length ) { - jQuery.error( "Invalid XML: " + data ); - } - return xml; -}; - - -var - rbracket = /\[\]$/, - rCRLF = /\r?\n/g, - rsubmitterTypes = /^(?:submit|button|image|reset|file)$/i, - rsubmittable = /^(?:input|select|textarea|keygen)/i; - -function buildParams( prefix, obj, traditional, add ) { - var name; - - if ( Array.isArray( obj ) ) { - - // Serialize array item. - jQuery.each( obj, function( i, v ) { - if ( traditional || rbracket.test( prefix ) ) { - - // Treat each array item as a scalar. - add( prefix, v ); - - } else { - - // Item is non-scalar (array or object), encode its numeric index. - buildParams( - prefix + "[" + ( typeof v === "object" && v != null ? i : "" ) + "]", - v, - traditional, - add - ); - } - } ); - - } else if ( !traditional && jQuery.type( obj ) === "object" ) { - - // Serialize object item. - for ( name in obj ) { - buildParams( prefix + "[" + name + "]", obj[ name ], traditional, add ); - } - - } else { - - // Serialize scalar item. - add( prefix, obj ); - } -} - -// Serialize an array of form elements or a set of -// key/values into a query string -jQuery.param = function( a, traditional ) { - var prefix, - s = [], - add = function( key, valueOrFunction ) { - - // If value is a function, invoke it and use its return value - var value = jQuery.isFunction( valueOrFunction ) ? - valueOrFunction() : - valueOrFunction; - - s[ s.length ] = encodeURIComponent( key ) + "=" + - encodeURIComponent( value == null ? "" : value ); - }; - - // If an array was passed in, assume that it is an array of form elements. - if ( Array.isArray( a ) || ( a.jquery && !jQuery.isPlainObject( a ) ) ) { - - // Serialize the form elements - jQuery.each( a, function() { - add( this.name, this.value ); - } ); - - } else { - - // If traditional, encode the "old" way (the way 1.3.2 or older - // did it), otherwise encode params recursively. - for ( prefix in a ) { - buildParams( prefix, a[ prefix ], traditional, add ); - } - } - - // Return the resulting serialization - return s.join( "&" ); -}; - -jQuery.fn.extend( { - serialize: function() { - return jQuery.param( this.serializeArray() ); - }, - serializeArray: function() { - return this.map( function() { - - // Can add propHook for "elements" to filter or add form elements - var elements = jQuery.prop( this, "elements" ); - return elements ? jQuery.makeArray( elements ) : this; - } ) - .filter( function() { - var type = this.type; - - // Use .is( ":disabled" ) so that fieldset[disabled] works - return this.name && !jQuery( this ).is( ":disabled" ) && - rsubmittable.test( this.nodeName ) && !rsubmitterTypes.test( type ) && - ( this.checked || !rcheckableType.test( type ) ); - } ) - .map( function( i, elem ) { - var val = jQuery( this ).val(); - - if ( val == null ) { - return null; - } - - if ( Array.isArray( val ) ) { - return jQuery.map( val, function( val ) { - return { name: elem.name, value: val.replace( rCRLF, "\r\n" ) }; - } ); - } - - return { name: elem.name, value: val.replace( rCRLF, "\r\n" ) }; - } ).get(); - } -} ); - - -var - r20 = /%20/g, - rhash = /#.*$/, - rantiCache = /([?&])_=[^&]*/, - rheaders = /^(.*?):[ \t]*([^\r\n]*)$/mg, - - // #7653, #8125, #8152: local protocol detection - rlocalProtocol = /^(?:about|app|app-storage|.+-extension|file|res|widget):$/, - rnoContent = /^(?:GET|HEAD)$/, - rprotocol = /^\/\//, - - /* Prefilters - * 1) They are useful to introduce custom dataTypes (see ajax/jsonp.js for an example) - * 2) These are called: - * - BEFORE asking for a transport - * - AFTER param serialization (s.data is a string if s.processData is true) - * 3) key is the dataType - * 4) the catchall symbol "*" can be used - * 5) execution will start with transport dataType and THEN continue down to "*" if needed - */ - prefilters = {}, - - /* Transports bindings - * 1) key is the dataType - * 2) the catchall symbol "*" can be used - * 3) selection will start with transport dataType and THEN go to "*" if needed - */ - transports = {}, - - // Avoid comment-prolog char sequence (#10098); must appease lint and evade compression - allTypes = "*/".concat( "*" ), - - // Anchor tag for parsing the document origin - originAnchor = document.createElement( "a" ); - originAnchor.href = location.href; - -// Base "constructor" for jQuery.ajaxPrefilter and jQuery.ajaxTransport -function addToPrefiltersOrTransports( structure ) { - - // dataTypeExpression is optional and defaults to "*" - return function( dataTypeExpression, func ) { - - if ( typeof dataTypeExpression !== "string" ) { - func = dataTypeExpression; - dataTypeExpression = "*"; - } - - var dataType, - i = 0, - dataTypes = dataTypeExpression.toLowerCase().match( rnothtmlwhite ) || []; - - if ( jQuery.isFunction( func ) ) { - - // For each dataType in the dataTypeExpression - while ( ( dataType = dataTypes[ i++ ] ) ) { - - // Prepend if requested - if ( dataType[ 0 ] === "+" ) { - dataType = dataType.slice( 1 ) || "*"; - ( structure[ dataType ] = structure[ dataType ] || [] ).unshift( func ); - - // Otherwise append - } else { - ( structure[ dataType ] = structure[ dataType ] || [] ).push( func ); - } - } - } - }; -} - -// Base inspection function for prefilters and transports -function inspectPrefiltersOrTransports( structure, options, originalOptions, jqXHR ) { - - var inspected = {}, - seekingTransport = ( structure === transports ); - - function inspect( dataType ) { - var selected; - inspected[ dataType ] = true; - jQuery.each( structure[ dataType ] || [], function( _, prefilterOrFactory ) { - var dataTypeOrTransport = prefilterOrFactory( options, originalOptions, jqXHR ); - if ( typeof dataTypeOrTransport === "string" && - !seekingTransport && !inspected[ dataTypeOrTransport ] ) { - - options.dataTypes.unshift( dataTypeOrTransport ); - inspect( dataTypeOrTransport ); - return false; - } else if ( seekingTransport ) { - return !( selected = dataTypeOrTransport ); - } - } ); - return selected; - } - - return inspect( options.dataTypes[ 0 ] ) || !inspected[ "*" ] && inspect( "*" ); -} - -// A special extend for ajax options -// that takes "flat" options (not to be deep extended) -// Fixes #9887 -function ajaxExtend( target, src ) { - var key, deep, - flatOptions = jQuery.ajaxSettings.flatOptions || {}; - - for ( key in src ) { - if ( src[ key ] !== undefined ) { - ( flatOptions[ key ] ? target : ( deep || ( deep = {} ) ) )[ key ] = src[ key ]; - } - } - if ( deep ) { - jQuery.extend( true, target, deep ); - } - - return target; -} - -/* Handles responses to an ajax request: - * - finds the right dataType (mediates between content-type and expected dataType) - * - returns the corresponding response - */ -function ajaxHandleResponses( s, jqXHR, responses ) { - - var ct, type, finalDataType, firstDataType, - contents = s.contents, - dataTypes = s.dataTypes; - - // Remove auto dataType and get content-type in the process - while ( dataTypes[ 0 ] === "*" ) { - dataTypes.shift(); - if ( ct === undefined ) { - ct = s.mimeType || jqXHR.getResponseHeader( "Content-Type" ); - } - } - - // Check if we're dealing with a known content-type - if ( ct ) { - for ( type in contents ) { - if ( contents[ type ] && contents[ type ].test( ct ) ) { - dataTypes.unshift( type ); - break; - } - } - } - - // Check to see if we have a response for the expected dataType - if ( dataTypes[ 0 ] in responses ) { - finalDataType = dataTypes[ 0 ]; - } else { - - // Try convertible dataTypes - for ( type in responses ) { - if ( !dataTypes[ 0 ] || s.converters[ type + " " + dataTypes[ 0 ] ] ) { - finalDataType = type; - break; - } - if ( !firstDataType ) { - firstDataType = type; - } - } - - // Or just use first one - finalDataType = finalDataType || firstDataType; - } - - // If we found a dataType - // We add the dataType to the list if needed - // and return the corresponding response - if ( finalDataType ) { - if ( finalDataType !== dataTypes[ 0 ] ) { - dataTypes.unshift( finalDataType ); - } - return responses[ finalDataType ]; - } -} - -/* Chain conversions given the request and the original response - * Also sets the responseXXX fields on the jqXHR instance - */ -function ajaxConvert( s, response, jqXHR, isSuccess ) { - var conv2, current, conv, tmp, prev, - converters = {}, - - // Work with a copy of dataTypes in case we need to modify it for conversion - dataTypes = s.dataTypes.slice(); - - // Create converters map with lowercased keys - if ( dataTypes[ 1 ] ) { - for ( conv in s.converters ) { - converters[ conv.toLowerCase() ] = s.converters[ conv ]; - } - } - - current = dataTypes.shift(); - - // Convert to each sequential dataType - while ( current ) { - - if ( s.responseFields[ current ] ) { - jqXHR[ s.responseFields[ current ] ] = response; - } - - // Apply the dataFilter if provided - if ( !prev && isSuccess && s.dataFilter ) { - response = s.dataFilter( response, s.dataType ); - } - - prev = current; - current = dataTypes.shift(); - - if ( current ) { - - // There's only work to do if current dataType is non-auto - if ( current === "*" ) { - - current = prev; - - // Convert response if prev dataType is non-auto and differs from current - } else if ( prev !== "*" && prev !== current ) { - - // Seek a direct converter - conv = converters[ prev + " " + current ] || converters[ "* " + current ]; - - // If none found, seek a pair - if ( !conv ) { - for ( conv2 in converters ) { - - // If conv2 outputs current - tmp = conv2.split( " " ); - if ( tmp[ 1 ] === current ) { - - // If prev can be converted to accepted input - conv = converters[ prev + " " + tmp[ 0 ] ] || - converters[ "* " + tmp[ 0 ] ]; - if ( conv ) { - - // Condense equivalence converters - if ( conv === true ) { - conv = converters[ conv2 ]; - - // Otherwise, insert the intermediate dataType - } else if ( converters[ conv2 ] !== true ) { - current = tmp[ 0 ]; - dataTypes.unshift( tmp[ 1 ] ); - } - break; - } - } - } - } - - // Apply converter (if not an equivalence) - if ( conv !== true ) { - - // Unless errors are allowed to bubble, catch and return them - if ( conv && s.throws ) { - response = conv( response ); - } else { - try { - response = conv( response ); - } catch ( e ) { - return { - state: "parsererror", - error: conv ? e : "No conversion from " + prev + " to " + current - }; - } - } - } - } - } - } - - return { state: "success", data: response }; -} - -jQuery.extend( { - - // Counter for holding the number of active queries - active: 0, - - // Last-Modified header cache for next request - lastModified: {}, - etag: {}, - - ajaxSettings: { - url: location.href, - type: "GET", - isLocal: rlocalProtocol.test( location.protocol ), - global: true, - processData: true, - async: true, - contentType: "application/x-www-form-urlencoded; charset=UTF-8", - - /* - timeout: 0, - data: null, - dataType: null, - username: null, - password: null, - cache: null, - throws: false, - traditional: false, - headers: {}, - */ - - accepts: { - "*": allTypes, - text: "text/plain", - html: "text/html", - xml: "application/xml, text/xml", - json: "application/json, text/javascript" - }, - - contents: { - xml: /\bxml\b/, - html: /\bhtml/, - json: /\bjson\b/ - }, - - responseFields: { - xml: "responseXML", - text: "responseText", - json: "responseJSON" - }, - - // Data converters - // Keys separate source (or catchall "*") and destination types with a single space - converters: { - - // Convert anything to text - "* text": String, - - // Text to html (true = no transformation) - "text html": true, - - // Evaluate text as a json expression - "text json": JSON.parse, - - // Parse text as xml - "text xml": jQuery.parseXML - }, - - // For options that shouldn't be deep extended: - // you can add your own custom options here if - // and when you create one that shouldn't be - // deep extended (see ajaxExtend) - flatOptions: { - url: true, - context: true - } - }, - - // Creates a full fledged settings object into target - // with both ajaxSettings and settings fields. - // If target is omitted, writes into ajaxSettings. - ajaxSetup: function( target, settings ) { - return settings ? - - // Building a settings object - ajaxExtend( ajaxExtend( target, jQuery.ajaxSettings ), settings ) : - - // Extending ajaxSettings - ajaxExtend( jQuery.ajaxSettings, target ); - }, - - ajaxPrefilter: addToPrefiltersOrTransports( prefilters ), - ajaxTransport: addToPrefiltersOrTransports( transports ), - - // Main method - ajax: function( url, options ) { - - // If url is an object, simulate pre-1.5 signature - if ( typeof url === "object" ) { - options = url; - url = undefined; - } - - // Force options to be an object - options = options || {}; - - var transport, - - // URL without anti-cache param - cacheURL, - - // Response headers - responseHeadersString, - responseHeaders, - - // timeout handle - timeoutTimer, - - // Url cleanup var - urlAnchor, - - // Request state (becomes false upon send and true upon completion) - completed, - - // To know if global events are to be dispatched - fireGlobals, - - // Loop variable - i, - - // uncached part of the url - uncached, - - // Create the final options object - s = jQuery.ajaxSetup( {}, options ), - - // Callbacks context - callbackContext = s.context || s, - - // Context for global events is callbackContext if it is a DOM node or jQuery collection - globalEventContext = s.context && - ( callbackContext.nodeType || callbackContext.jquery ) ? - jQuery( callbackContext ) : - jQuery.event, - - // Deferreds - deferred = jQuery.Deferred(), - completeDeferred = jQuery.Callbacks( "once memory" ), - - // Status-dependent callbacks - statusCode = s.statusCode || {}, - - // Headers (they are sent all at once) - requestHeaders = {}, - requestHeadersNames = {}, - - // Default abort message - strAbort = "canceled", - - // Fake xhr - jqXHR = { - readyState: 0, - - // Builds headers hashtable if needed - getResponseHeader: function( key ) { - var match; - if ( completed ) { - if ( !responseHeaders ) { - responseHeaders = {}; - while ( ( match = rheaders.exec( responseHeadersString ) ) ) { - responseHeaders[ match[ 1 ].toLowerCase() ] = match[ 2 ]; - } - } - match = responseHeaders[ key.toLowerCase() ]; - } - return match == null ? null : match; - }, - - // Raw string - getAllResponseHeaders: function() { - return completed ? responseHeadersString : null; - }, - - // Caches the header - setRequestHeader: function( name, value ) { - if ( completed == null ) { - name = requestHeadersNames[ name.toLowerCase() ] = - requestHeadersNames[ name.toLowerCase() ] || name; - requestHeaders[ name ] = value; - } - return this; - }, - - // Overrides response content-type header - overrideMimeType: function( type ) { - if ( completed == null ) { - s.mimeType = type; - } - return this; - }, - - // Status-dependent callbacks - statusCode: function( map ) { - var code; - if ( map ) { - if ( completed ) { - - // Execute the appropriate callbacks - jqXHR.always( map[ jqXHR.status ] ); - } else { - - // Lazy-add the new callbacks in a way that preserves old ones - for ( code in map ) { - statusCode[ code ] = [ statusCode[ code ], map[ code ] ]; - } - } - } - return this; - }, - - // Cancel the request - abort: function( statusText ) { - var finalText = statusText || strAbort; - if ( transport ) { - transport.abort( finalText ); - } - done( 0, finalText ); - return this; - } - }; - - // Attach deferreds - deferred.promise( jqXHR ); - - // Add protocol if not provided (prefilters might expect it) - // Handle falsy url in the settings object (#10093: consistency with old signature) - // We also use the url parameter if available - s.url = ( ( url || s.url || location.href ) + "" ) - .replace( rprotocol, location.protocol + "//" ); - - // Alias method option to type as per ticket #12004 - s.type = options.method || options.type || s.method || s.type; - - // Extract dataTypes list - s.dataTypes = ( s.dataType || "*" ).toLowerCase().match( rnothtmlwhite ) || [ "" ]; - - // A cross-domain request is in order when the origin doesn't match the current origin. - if ( s.crossDomain == null ) { - urlAnchor = document.createElement( "a" ); - - // Support: IE <=8 - 11, Edge 12 - 13 - // IE throws exception on accessing the href property if url is malformed, - // e.g. http://example.com:80x/ - try { - urlAnchor.href = s.url; - - // Support: IE <=8 - 11 only - // Anchor's host property isn't correctly set when s.url is relative - urlAnchor.href = urlAnchor.href; - s.crossDomain = originAnchor.protocol + "//" + originAnchor.host !== - urlAnchor.protocol + "//" + urlAnchor.host; - } catch ( e ) { - - // If there is an error parsing the URL, assume it is crossDomain, - // it can be rejected by the transport if it is invalid - s.crossDomain = true; - } - } - - // Convert data if not already a string - if ( s.data && s.processData && typeof s.data !== "string" ) { - s.data = jQuery.param( s.data, s.traditional ); - } - - // Apply prefilters - inspectPrefiltersOrTransports( prefilters, s, options, jqXHR ); - - // If request was aborted inside a prefilter, stop there - if ( completed ) { - return jqXHR; - } - - // We can fire global events as of now if asked to - // Don't fire events if jQuery.event is undefined in an AMD-usage scenario (#15118) - fireGlobals = jQuery.event && s.global; - - // Watch for a new set of requests - if ( fireGlobals && jQuery.active++ === 0 ) { - jQuery.event.trigger( "ajaxStart" ); - } - - // Uppercase the type - s.type = s.type.toUpperCase(); - - // Determine if request has content - s.hasContent = !rnoContent.test( s.type ); - - // Save the URL in case we're toying with the If-Modified-Since - // and/or If-None-Match header later on - // Remove hash to simplify url manipulation - cacheURL = s.url.replace( rhash, "" ); - - // More options handling for requests with no content - if ( !s.hasContent ) { - - // Remember the hash so we can put it back - uncached = s.url.slice( cacheURL.length ); - - // If data is available, append data to url - if ( s.data ) { - cacheURL += ( rquery.test( cacheURL ) ? "&" : "?" ) + s.data; - - // #9682: remove data so that it's not used in an eventual retry - delete s.data; - } - - // Add or update anti-cache param if needed - if ( s.cache === false ) { - cacheURL = cacheURL.replace( rantiCache, "$1" ); - uncached = ( rquery.test( cacheURL ) ? "&" : "?" ) + "_=" + ( nonce++ ) + uncached; - } - - // Put hash and anti-cache on the URL that will be requested (gh-1732) - s.url = cacheURL + uncached; - - // Change '%20' to '+' if this is encoded form body content (gh-2658) - } else if ( s.data && s.processData && - ( s.contentType || "" ).indexOf( "application/x-www-form-urlencoded" ) === 0 ) { - s.data = s.data.replace( r20, "+" ); - } - - // Set the If-Modified-Since and/or If-None-Match header, if in ifModified mode. - if ( s.ifModified ) { - if ( jQuery.lastModified[ cacheURL ] ) { - jqXHR.setRequestHeader( "If-Modified-Since", jQuery.lastModified[ cacheURL ] ); - } - if ( jQuery.etag[ cacheURL ] ) { - jqXHR.setRequestHeader( "If-None-Match", jQuery.etag[ cacheURL ] ); - } - } - - // Set the correct header, if data is being sent - if ( s.data && s.hasContent && s.contentType !== false || options.contentType ) { - jqXHR.setRequestHeader( "Content-Type", s.contentType ); - } - - // Set the Accepts header for the server, depending on the dataType - jqXHR.setRequestHeader( - "Accept", - s.dataTypes[ 0 ] && s.accepts[ s.dataTypes[ 0 ] ] ? - s.accepts[ s.dataTypes[ 0 ] ] + - ( s.dataTypes[ 0 ] !== "*" ? ", " + allTypes + "; q=0.01" : "" ) : - s.accepts[ "*" ] - ); - - // Check for headers option - for ( i in s.headers ) { - jqXHR.setRequestHeader( i, s.headers[ i ] ); - } - - // Allow custom headers/mimetypes and early abort - if ( s.beforeSend && - ( s.beforeSend.call( callbackContext, jqXHR, s ) === false || completed ) ) { - - // Abort if not done already and return - return jqXHR.abort(); - } - - // Aborting is no longer a cancellation - strAbort = "abort"; - - // Install callbacks on deferreds - completeDeferred.add( s.complete ); - jqXHR.done( s.success ); - jqXHR.fail( s.error ); - - // Get transport - transport = inspectPrefiltersOrTransports( transports, s, options, jqXHR ); - - // If no transport, we auto-abort - if ( !transport ) { - done( -1, "No Transport" ); - } else { - jqXHR.readyState = 1; - - // Send global event - if ( fireGlobals ) { - globalEventContext.trigger( "ajaxSend", [ jqXHR, s ] ); - } - - // If request was aborted inside ajaxSend, stop there - if ( completed ) { - return jqXHR; - } - - // Timeout - if ( s.async && s.timeout > 0 ) { - timeoutTimer = window.setTimeout( function() { - jqXHR.abort( "timeout" ); - }, s.timeout ); - } - - try { - completed = false; - transport.send( requestHeaders, done ); - } catch ( e ) { - - // Rethrow post-completion exceptions - if ( completed ) { - throw e; - } - - // Propagate others as results - done( -1, e ); - } - } - - // Callback for when everything is done - function done( status, nativeStatusText, responses, headers ) { - var isSuccess, success, error, response, modified, - statusText = nativeStatusText; - - // Ignore repeat invocations - if ( completed ) { - return; - } - - completed = true; - - // Clear timeout if it exists - if ( timeoutTimer ) { - window.clearTimeout( timeoutTimer ); - } - - // Dereference transport for early garbage collection - // (no matter how long the jqXHR object will be used) - transport = undefined; - - // Cache response headers - responseHeadersString = headers || ""; - - // Set readyState - jqXHR.readyState = status > 0 ? 4 : 0; - - // Determine if successful - isSuccess = status >= 200 && status < 300 || status === 304; - - // Get response data - if ( responses ) { - response = ajaxHandleResponses( s, jqXHR, responses ); - } - - // Convert no matter what (that way responseXXX fields are always set) - response = ajaxConvert( s, response, jqXHR, isSuccess ); - - // If successful, handle type chaining - if ( isSuccess ) { - - // Set the If-Modified-Since and/or If-None-Match header, if in ifModified mode. - if ( s.ifModified ) { - modified = jqXHR.getResponseHeader( "Last-Modified" ); - if ( modified ) { - jQuery.lastModified[ cacheURL ] = modified; - } - modified = jqXHR.getResponseHeader( "etag" ); - if ( modified ) { - jQuery.etag[ cacheURL ] = modified; - } - } - - // if no content - if ( status === 204 || s.type === "HEAD" ) { - statusText = "nocontent"; - - // if not modified - } else if ( status === 304 ) { - statusText = "notmodified"; - - // If we have data, let's convert it - } else { - statusText = response.state; - success = response.data; - error = response.error; - isSuccess = !error; - } - } else { - - // Extract error from statusText and normalize for non-aborts - error = statusText; - if ( status || !statusText ) { - statusText = "error"; - if ( status < 0 ) { - status = 0; - } - } - } - - // Set data for the fake xhr object - jqXHR.status = status; - jqXHR.statusText = ( nativeStatusText || statusText ) + ""; - - // Success/Error - if ( isSuccess ) { - deferred.resolveWith( callbackContext, [ success, statusText, jqXHR ] ); - } else { - deferred.rejectWith( callbackContext, [ jqXHR, statusText, error ] ); - } - - // Status-dependent callbacks - jqXHR.statusCode( statusCode ); - statusCode = undefined; - - if ( fireGlobals ) { - globalEventContext.trigger( isSuccess ? "ajaxSuccess" : "ajaxError", - [ jqXHR, s, isSuccess ? success : error ] ); - } - - // Complete - completeDeferred.fireWith( callbackContext, [ jqXHR, statusText ] ); - - if ( fireGlobals ) { - globalEventContext.trigger( "ajaxComplete", [ jqXHR, s ] ); - - // Handle the global AJAX counter - if ( !( --jQuery.active ) ) { - jQuery.event.trigger( "ajaxStop" ); - } - } - } - - return jqXHR; - }, - - getJSON: function( url, data, callback ) { - return jQuery.get( url, data, callback, "json" ); - }, - - getScript: function( url, callback ) { - return jQuery.get( url, undefined, callback, "script" ); - } -} ); - -jQuery.each( [ "get", "post" ], function( i, method ) { - jQuery[ method ] = function( url, data, callback, type ) { - - // Shift arguments if data argument was omitted - if ( jQuery.isFunction( data ) ) { - type = type || callback; - callback = data; - data = undefined; - } - - // The url can be an options object (which then must have .url) - return jQuery.ajax( jQuery.extend( { - url: url, - type: method, - dataType: type, - data: data, - success: callback - }, jQuery.isPlainObject( url ) && url ) ); - }; -} ); - - -jQuery._evalUrl = function( url ) { - return jQuery.ajax( { - url: url, - - // Make this explicit, since user can override this through ajaxSetup (#11264) - type: "GET", - dataType: "script", - cache: true, - async: false, - global: false, - "throws": true - } ); -}; - - -jQuery.fn.extend( { - wrapAll: function( html ) { - var wrap; - - if ( this[ 0 ] ) { - if ( jQuery.isFunction( html ) ) { - html = html.call( this[ 0 ] ); - } - - // The elements to wrap the target around - wrap = jQuery( html, this[ 0 ].ownerDocument ).eq( 0 ).clone( true ); - - if ( this[ 0 ].parentNode ) { - wrap.insertBefore( this[ 0 ] ); - } - - wrap.map( function() { - var elem = this; - - while ( elem.firstElementChild ) { - elem = elem.firstElementChild; - } - - return elem; - } ).append( this ); - } - - return this; - }, - - wrapInner: function( html ) { - if ( jQuery.isFunction( html ) ) { - return this.each( function( i ) { - jQuery( this ).wrapInner( html.call( this, i ) ); - } ); - } - - return this.each( function() { - var self = jQuery( this ), - contents = self.contents(); - - if ( contents.length ) { - contents.wrapAll( html ); - - } else { - self.append( html ); - } - } ); - }, - - wrap: function( html ) { - var isFunction = jQuery.isFunction( html ); - - return this.each( function( i ) { - jQuery( this ).wrapAll( isFunction ? html.call( this, i ) : html ); - } ); - }, - - unwrap: function( selector ) { - this.parent( selector ).not( "body" ).each( function() { - jQuery( this ).replaceWith( this.childNodes ); - } ); - return this; - } -} ); - - -jQuery.expr.pseudos.hidden = function( elem ) { - return !jQuery.expr.pseudos.visible( elem ); -}; -jQuery.expr.pseudos.visible = function( elem ) { - return !!( elem.offsetWidth || elem.offsetHeight || elem.getClientRects().length ); -}; - - - - -jQuery.ajaxSettings.xhr = function() { - try { - return new window.XMLHttpRequest(); - } catch ( e ) {} -}; - -var xhrSuccessStatus = { - - // File protocol always yields status code 0, assume 200 - 0: 200, - - // Support: IE <=9 only - // #1450: sometimes IE returns 1223 when it should be 204 - 1223: 204 - }, - xhrSupported = jQuery.ajaxSettings.xhr(); - -support.cors = !!xhrSupported && ( "withCredentials" in xhrSupported ); -support.ajax = xhrSupported = !!xhrSupported; - -jQuery.ajaxTransport( function( options ) { - var callback, errorCallback; - - // Cross domain only allowed if supported through XMLHttpRequest - if ( support.cors || xhrSupported && !options.crossDomain ) { - return { - send: function( headers, complete ) { - var i, - xhr = options.xhr(); - - xhr.open( - options.type, - options.url, - options.async, - options.username, - options.password - ); - - // Apply custom fields if provided - if ( options.xhrFields ) { - for ( i in options.xhrFields ) { - xhr[ i ] = options.xhrFields[ i ]; - } - } - - // Override mime type if needed - if ( options.mimeType && xhr.overrideMimeType ) { - xhr.overrideMimeType( options.mimeType ); - } - - // X-Requested-With header - // For cross-domain requests, seeing as conditions for a preflight are - // akin to a jigsaw puzzle, we simply never set it to be sure. - // (it can always be set on a per-request basis or even using ajaxSetup) - // For same-domain requests, won't change header if already provided. - if ( !options.crossDomain && !headers[ "X-Requested-With" ] ) { - headers[ "X-Requested-With" ] = "XMLHttpRequest"; - } - - // Set headers - for ( i in headers ) { - xhr.setRequestHeader( i, headers[ i ] ); - } - - // Callback - callback = function( type ) { - return function() { - if ( callback ) { - callback = errorCallback = xhr.onload = - xhr.onerror = xhr.onabort = xhr.onreadystatechange = null; - - if ( type === "abort" ) { - xhr.abort(); - } else if ( type === "error" ) { - - // Support: IE <=9 only - // On a manual native abort, IE9 throws - // errors on any property access that is not readyState - if ( typeof xhr.status !== "number" ) { - complete( 0, "error" ); - } else { - complete( - - // File: protocol always yields status 0; see #8605, #14207 - xhr.status, - xhr.statusText - ); - } - } else { - complete( - xhrSuccessStatus[ xhr.status ] || xhr.status, - xhr.statusText, - - // Support: IE <=9 only - // IE9 has no XHR2 but throws on binary (trac-11426) - // For XHR2 non-text, let the caller handle it (gh-2498) - ( xhr.responseType || "text" ) !== "text" || - typeof xhr.responseText !== "string" ? - { binary: xhr.response } : - { text: xhr.responseText }, - xhr.getAllResponseHeaders() - ); - } - } - }; - }; - - // Listen to events - xhr.onload = callback(); - errorCallback = xhr.onerror = callback( "error" ); - - // Support: IE 9 only - // Use onreadystatechange to replace onabort - // to handle uncaught aborts - if ( xhr.onabort !== undefined ) { - xhr.onabort = errorCallback; - } else { - xhr.onreadystatechange = function() { - - // Check readyState before timeout as it changes - if ( xhr.readyState === 4 ) { - - // Allow onerror to be called first, - // but that will not handle a native abort - // Also, save errorCallback to a variable - // as xhr.onerror cannot be accessed - window.setTimeout( function() { - if ( callback ) { - errorCallback(); - } - } ); - } - }; - } - - // Create the abort callback - callback = callback( "abort" ); - - try { - - // Do send the request (this may raise an exception) - xhr.send( options.hasContent && options.data || null ); - } catch ( e ) { - - // #14683: Only rethrow if this hasn't been notified as an error yet - if ( callback ) { - throw e; - } - } - }, - - abort: function() { - if ( callback ) { - callback(); - } - } - }; - } -} ); - - - - -// Prevent auto-execution of scripts when no explicit dataType was provided (See gh-2432) -jQuery.ajaxPrefilter( function( s ) { - if ( s.crossDomain ) { - s.contents.script = false; - } -} ); - -// Install script dataType -jQuery.ajaxSetup( { - accepts: { - script: "text/javascript, application/javascript, " + - "application/ecmascript, application/x-ecmascript" - }, - contents: { - script: /\b(?:java|ecma)script\b/ - }, - converters: { - "text script": function( text ) { - jQuery.globalEval( text ); - return text; - } - } -} ); - -// Handle cache's special case and crossDomain -jQuery.ajaxPrefilter( "script", function( s ) { - if ( s.cache === undefined ) { - s.cache = false; - } - if ( s.crossDomain ) { - s.type = "GET"; - } -} ); - -// Bind script tag hack transport -jQuery.ajaxTransport( "script", function( s ) { - - // This transport only deals with cross domain requests - if ( s.crossDomain ) { - var script, callback; - return { - send: function( _, complete ) { - script = jQuery( "