Commit 5ae1435f authored by Ole Streicher's avatar Ole Streicher

Initial upstream commit

parents
This package is maintained by
Lars Lundin <llundin@eso.org>
on behalf of the European Southern Observatory (ESO).
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
will cause the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
## Process this file with automake to produce Makefile.in
## This file is part of the VISIR Pipeline
## Copyright (C) 2002,2003 European Southern Observatory
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02111-1307 USA
AUTOMAKE_OPTIONS = 1.8 foreign
ACLOCAL_AMFLAGS = -I m4macros
DISTCLEANFILES = *~
COMPILE_FIRST =
TOPSUBDIRS = irplib visir recipes
COMPILE_LAST =
HTML_SUBDIRS =
SUBDIRS = $(COMPILE_FIRST) $(TOPSUBDIRS) $(COMPILE_LAST)
EXTRA_DIST = m4macros/eso.m4 m4macros/cpl.m4 admin/html.am \
doxygen/Doxyfile.in setup
pipedocs_DATA = ChangeLog AUTHORS NEWS README TODO
if MAINTAINER_MODE
MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.h.in configure stamp-h.in
clean-local: clean-html
dist-hook: html
@if test -d $(top_srcdir)/html; then \
echo "cp -pr $(top_srcdir)/html $(distdir)"; \
cp -pr $(top_srcdir)/html $(distdir); \
fi
find $(distdir) -type d ! -perm -222 -exec chmod u+w {} \; -o \
-type f ! -perm -222 -exec chmod u+w {} \; || chmod -R u+w $(distdir)
else
clean-local:
endif
uninstall-local: uninstall-html
libtool: $(LIBTOOL_DEPS)
$(SHELL) ./config.status --recheck
include $(top_srcdir)/admin/html.am
This diff is collapsed.
#*******************************************************************************
# E.S.O. - VLT project
#
# "@(#) $Id: Makefile.purify.in,v 1.2 2008/05/09 14:01:27 cguirao Exp $"
#
# Makefile of Pipeline subsystem.
#
# who when what
# -------- ---------- ----------------------------------------------
#
ifdef MAKE_PURE
ENABLE_PURIFY=on
ENABLE_PURECOV=on
ENABLE_PURE=on
endif
ifdef MAKE_PUREGUI
ENABLE_PURIFY=on
ENABLE_PURECOV=on
endif
ifdef MAKE_PURIFY
ENABLE_PURIFY=on
endif
ifdef MAKE_PURECOV
ENABLE_PURECOV=on
endif
# -user-path="../test:../src:src:test" \
ifdef ENABLE_PURIFY
PURIFY = purify \
-always-use-cache-dir \
-g++=yes \
-log-file=./.purifydir/MemoryReport \
-linker=$(GNU_ROOT)/bin/ld \
-append-logfile=yes \
-messages=batch \
-dlclose-mode=2 \
-view-file=./.purifydir/purify-%v.pv \
-chain-length=100
else
PURIFY =
endif
ifdef MAKE_PUREGUI
PURIFY = purify \
-always-use-cache-dir \
-user-path="../test:../src:src:test" \
-g++=yes \
-linker=$(GNU_ROOT)/bin/ld
endif
ifdef ENABLE_PURECOV
PURECOV = purecov \
-always-use-cache-dir \
-counts-file=./.purifydir/purecov-%v.pcv
ifdef MAKE_PUREGUI
PURECOV = purecov -always-use-cache-dir
endif
else
PURECOV =
endif
ifdef ENABLE_PURIFY
CCLD = "$(PURIFY)" $(CC)
endif
ifdef ENABLE_PURECOV
CCLD = "$(PURECOV)" $(CC)
endif
ifdef ENABLE_PURE
CCLD = "$(PURIFY) $(PURECOV)" $(CC)
endif
pureReport:
@ purecov -export=.purifydir/CoverageReport .purifydir/*.pcv
@ echo "== Purify coverage report in '.purifydir/CoverageReport'."
pureGUI:
@ ls purecov*.pcv > /dev/null 2>&1; if [ $$? = "0" ]; then purecov -view purecov*.pcv &; fi
@ ls purify*.pv > /dev/null 2>&1; if [ $$? = "0" ]; then \
for member in `ls purify*.pv`; \
do purify -view $$member & \
done \
fi
check-am: make_links
make_links:
ifeq ($(ENABLE_PURIFY),on)
-@if [ ! -d .purifydir ]; then mkdir .purifydir ; fi
endif
ifeq ($(ENABLE_PURECOV),on)
-@if [ ! -d .purifydir ]; then mkdir .purifydir ;fi
endif
clean-am: pureClean
pureClean:
-@ rm -rf .purifydir/*
2005-02-03: Ambiguous detection of INS setting with WLEN 12.2 micron, RESOL HRS
2005-02-03: Parameters of detector warp, RESOL HRG
# LIB_CHECK_GSL
#------------------
# Checks for the gsl library and header files.
AC_DEFUN([LIB_CHECK_GSL],
[
AC_MSG_CHECKING([for gsl])
naco_gsl_check_header="gsl/gsl_multimin.h"
naco_gsl_check_lib="libgsl.a"
naco_gsl_includes=""
naco_gsl_libraries=""
AC_ARG_WITH(gsl,
AC_HELP_STRING([--with-gsl],
[location where gsl is installed]),
[
naco_with_gsl_includes=$withval/include
naco_with_gsl_libs=$withval/lib
])
AC_ARG_WITH(gsl-includes,
AC_HELP_STRING([--with-gsl-includes],
[location of the gsl header files]),
naco_with_gsl_includes=$withval)
AC_ARG_WITH(gsl-libs,
AC_HELP_STRING([--with-gsl-libs],
[location of the gsl library]),
naco_with_gsl_libs=$withval)
AC_ARG_ENABLE(gsl-test,
AC_HELP_STRING([--disable-gsl-test],
[disables checks for the gsl library and headers]),
naco_enable_gsl_test=$enableval,
naco_enable_gsl_test=yes)
if test "x$naco_enable_gsl_test" = xyes; then
# Check for the gsl includes
if test -z "$naco_with_gsl_includes"; then
naco_gsl_incdirs="/opt/gsl/include /usr/local/include /usr/include"
test -n "$CPLDIR" && naco_gsl_incdirs="$CPLDIR/include \
$naco_gsl_incdirs"
test -n "$GSLDIR" && naco_gsl_incdirs="$GSLDIR/include \
$naco_gsl_incdirs"
else
naco_gsl_incdirs="$naco_with_gsl_includes"
fi
ESO_FIND_FILE($naco_gsl_check_header, $naco_gsl_incdirs,
naco_gsl_includes)
# Check for the gsl library
if test -z "$naco_with_gsl_libs"; then
naco_gsl_libdirs="/opt/gsl/lib /usr/local/lib /usr/lib"
test -n "$CPLDIR" && naco_gsl_libdirs="$CPLDIR/lib \
$naco_gsl_libdirs"
test -n "$GSLDIR" && naco_gsl_libdirs="$GSLDIR/lib \
$naco_gsl_libdirs"
else
naco_gsl_libdirs="$naco_with_gsl_libs"
fi
ESO_FIND_FILE($naco_gsl_check_lib, $naco_gsl_libdirs,
naco_gsl_libraries)
if test x"$naco_gsl_includes" = xno || \
test x"$naco_gsl_libraries" = xno; then
naco_gsl_notfound=""
if test x"$naco_gsl_includes" = xno; then
if test x"$naco_gsl_libraries" = xno; then
naco_gsl_notfound="(headers and libraries)"
else
naco_gsl_notfound="(headers)"
fi
else
naco_gsl_notfound="(libraries)"
fi
AC_MSG_RESULT([not found])
AC_MSG_WARN([gsl $naco_gsl_notfound was not found on your system.])
GSL_INCLUDES=""
GSL_LDFLAGS=""
LIBGSL=""
else
AC_MSG_RESULT([libraries $naco_gsl_libraries, headers $naco_gsl_includes])
AC_DEFINE_UNQUOTED(HAVE_GSL, 1, [Define to 1 iff you have GSL])
# Set up the symbols
GSL_INCLUDES="-I$naco_gsl_includes"
GSL_LDFLAGS="-L$naco_gsl_libraries"
LDFLAGS="$LDFLAGS $GSL_LDFLAGS"
CPPFLAGS="$CPPFLAGS $GSL_INCLUDES"
AC_CHECK_LIB([gslcblas], [main], [LIBGSLC="-lgslcblas"], AC_MSG_ERROR([Library gslcblas not found]))
LIBS="$LIBS $LIBGSLC"
AC_CHECK_LIB([gsl], [main], [LIBGSLM="-lgsl"], AC_MSG_ERROR([Library gsl not found]))
# add cblas again at end to satisfy ld --as-needed
LIBS="$LIBS $LIBGSLM $LIBGSLC"
LIBGSL="$LIBGSLC $LIBGSLM $LIBGSLC"
fi
else
AC_MSG_RESULT([disabled])
AC_MSG_WARN([gsl checks have been disabled! This package may not build!])
GSL_INCLUDES=""
GSL_LDFLAGS=""
LIBGSL=""
fi
# To be removed after CPL switched to gsl
GSL_INCLUDES="$GSL_INCLUDES"
GSL_LDFLAGS="$GSL_LDFLAGS"
LIBGSL="$LIBGSL"
AC_SUBST(GSL_INCLUDES)
AC_SUBST(GSL_LDFLAGS)
AC_SUBST(LIBGSL)
])
# VISIR_SET_PREFIX(PREFIX)
#---------------------------
AC_DEFUN([VISIR_SET_PREFIX],
[
unset CDPATH
# make $PIPE_HOME the default for the installation
AC_PREFIX_DEFAULT($1)
if test "x$prefix" = "xNONE"; then
prefix=$ac_default_prefix
ac_configure_args="$ac_configure_args --prefix $prefix"
fi
if test "x$exec_prefix" = "xNONE"; then
exec_prefix=$prefix
fi
])
# VISIR_SET_VERSION_INFO(VERSION, [CURRENT], [REVISION], [AGE])
#----------------------------------------------------------------
# Setup various version information, especially the libtool versioning
AC_DEFUN([VISIR_SET_VERSION_INFO],
[
visir_version=`echo "$1" | sed -e 's/[[a-z,A-Z]].*$//'`
visir_major_version=`echo "$visir_version" | \
sed 's/\([[0-9]]*\).\(.*\)/\1/'`
visir_minor_version=`echo "$visir_version" | \
sed 's/\([[0-9]]*\).\([[0-9]]*\)\(.*\)/\2/'`
visir_micro_version=`echo "$visir_version" | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
if test -z "$visir_major_version"; then visir_major_version=0
fi
if test -z "$visir_minor_version"; then visir_minor_version=0
fi
if test -z "$visir_micro_version"; then visir_micro_version=0
fi
VISIR_VERSION="$visir_version"
VISIR_MAJOR_VERSION=$visir_major_version
VISIR_MINOR_VERSION=$visir_minor_version
VISIR_MICRO_VERSION=$visir_micro_version
if test -z "$4"; then VISIR_INTERFACE_AGE=0
else VISIR_INTERFACE_AGE="$4"
fi
VISIR_BINARY_AGE=`expr 100 '*' $VISIR_MINOR_VERSION + $VISIR_MICRO_VERSION`
VISIR_BINARY_VERSION=`expr 10000 '*' $VISIR_MAJOR_VERSION + \
$VISIR_BINARY_AGE`
AC_SUBST(VISIR_VERSION)
AC_SUBST(VISIR_MAJOR_VERSION)
AC_SUBST(VISIR_MINOR_VERSION)
AC_SUBST(VISIR_MICRO_VERSION)
AC_SUBST(VISIR_INTERFACE_AGE)
AC_SUBST(VISIR_BINARY_VERSION)
AC_SUBST(VISIR_BINARY_AGE)
AC_DEFINE_UNQUOTED(VISIR_MAJOR_VERSION, $VISIR_MAJOR_VERSION,
[VISIR major version number])
AC_DEFINE_UNQUOTED(VISIR_MINOR_VERSION, $VISIR_MINOR_VERSION,
[VISIR minor version number])
AC_DEFINE_UNQUOTED(VISIR_MICRO_VERSION, $VISIR_MICRO_VERSION,
[VISIR micro version number])
AC_DEFINE_UNQUOTED(VISIR_INTERFACE_AGE, $VISIR_INTERFACE_AGE,
[VISIR interface age])
AC_DEFINE_UNQUOTED(VISIR_BINARY_VERSION, $VISIR_BINARY_VERSION,
[VISIR binary version number])
AC_DEFINE_UNQUOTED(VISIR_BINARY_AGE, $VISIR_BINARY_AGE,
[VISIR binary age])
ESO_SET_LIBRARY_VERSION([$2], [$3], [$4])
])
# VISIR_SET_PATHS
#------------------
# Define auxiliary directories of the installed directory tree.
AC_DEFUN([VISIR_SET_PATHS],
[
if test -z "$plugindir"; then
plugindir='${libdir}/esopipes-plugins/${PACKAGE}-${VERSION}'
fi
if test -z "$pipedocsdir"; then
pipedocsdir='${datadir}/doc/esopipes/${PACKAGE}-${VERSION}'
fi
htmldir='${pipedocsdir}/html'
if test -z "$configdir"; then
configdir='${datadir}/${PACKAGE}/config'
fi
if test -z "$privatelibdir"; then
privatelibdir='${libdir}/${PACKAGE}-${VERSION}'
fi
AC_SUBST(plugindir)
AC_SUBST(htmldir)
AC_SUBST(configdir)
AC_SUBST(privatelibdir)
AC_SUBST(pipedocsdir)
# Define a preprocesor symbol for the plugin search paths
AC_DEFINE_UNQUOTED(VISIR_PLUGIN_DIR, "esopipes-plugins",
[Plugin directory tree prefix])
eval plugin_dir="$plugindir"
plugin_path=`eval echo $plugin_dir | \
sed -e "s/\/${PACKAGE}-${VERSION}.*$//"`
AC_DEFINE_UNQUOTED(VISIR_PLUGIN_PATH, "$plugin_path",
[Absolute path to the plugin directory tree])
])
# VISIR_CREATE_SYMBOLS
#-----------------------
# Define include and library related makefile symbol