Imported Upstream version 0.104

parent 83041b8d
......@@ -12,3 +12,4 @@ Thom van Os <thom@vanos.com>
Andreas Wacker <andreas100@methodstudios.com>
Artur Zaprzala <zybi@users.sourceforge.net>
Dan Dennedy <dan@dennedy.org>
Dean Kolosiek <kolosiekweb04@qwest.net>
2004-11-29 Dan Dennedy <dan@dennedy.org>
* libdv.pc: added -lm to make build more portable.
2004-10-19 Dan Dennedy <dan@dennedy.org>
* applied x86-64 patch from Dean Kolosiek.
2004-07-14 Charles "Buck" Krasic <krasic@acm.org>
* libdv 0.103 release
......
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
These are generic installation instructions.
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
The simplest way to compile this package is:
......@@ -54,20 +70,22 @@ The simplest way to compile this package is:
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
......@@ -75,28 +93,28 @@ directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' will install the package's files in
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
give `configure' the option `--exec-prefix=PREFIX', the package will
use PREFIX as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
......@@ -107,7 +125,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
......@@ -122,48 +140,81 @@ you can use the `configure' options `--x-includes=DIR' and
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
need to know the machine type.
If you are building compiler tools for cross-compiling, you can also
If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
Defining Variables
==================
`configure' recognizes the following options to control how it
operates.
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
./configure CC=/usr/local2/bin/gcc
will cause the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
......@@ -175,8 +226,6 @@ operates.
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
`configure' also accepts some other, not widely useful, options.
# Makefile.in generated by automake 1.8.5 from Makefile.am.
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
......@@ -34,7 +34,9 @@ POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(srcdir)/libdv.pc.in $(srcdir)/libdv.spec.in \
......@@ -48,7 +50,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(mkdir_p)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = libdv.spec libdv.pc
SOURCES =
......@@ -59,6 +61,12 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
......@@ -110,6 +118,8 @@ FFLAGS = @FFLAGS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
HOST_X86_64_FALSE = @HOST_X86_64_FALSE@
HOST_X86_64_TRUE = @HOST_X86_64_TRUE@
HOST_X86_FALSE = @HOST_X86_FALSE@
HOST_X86_TRUE = @HOST_X86_TRUE@
INSTALL_DATA = @INSTALL_DATA@
......@@ -122,6 +132,9 @@ LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
......@@ -160,6 +173,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
......@@ -218,19 +233,19 @@ all: config.h
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
......@@ -245,9 +260,9 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
......@@ -259,7 +274,7 @@ config.h: stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
......@@ -285,7 +300,7 @@ install-pkgconfigDATA: $(pkgconfig_DATA)
test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f="`echo $$p | sed -e 's|^.*/||'`"; \
f=$(am__strip_dir) \
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
......@@ -293,7 +308,7 @@ install-pkgconfigDATA: $(pkgconfig_DATA)
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
......@@ -448,15 +463,17 @@ distdir: $(DISTFILES)
|| exit 1; \
fi; \
done
list='$(SUBDIRS)'; for subdir in $$list; do \
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| mkdir "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="../$(top_distdir)" \
distdir="../$(distdir)/$$subdir" \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
......@@ -470,15 +487,15 @@ distdir: $(DISTFILES)
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
......@@ -491,7 +508,7 @@ dist-zip: distdir
$(am__remove_distdir)
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
......@@ -500,11 +517,11 @@ dist dist-all: distdir
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
......@@ -589,7 +606,7 @@ clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
......@@ -651,7 +668,7 @@ uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-libtool clean-recursive \
ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
dist-shar dist-tarZ dist-zip distcheck distclean \
dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-recursive distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
......
# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
# generated automatically by aclocal 1.9.2 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
......@@ -17,7 +17,7 @@
dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN(AM_PATH_GTK,
AC_DEFUN([AM_PATH_GTK],
[dnl
dnl Get the cflags and libraries from the gtk-config script
dnl
......@@ -6135,7 +6135,7 @@ AC_MSG_RESULT([$SED])
dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
dnl also defines GSTUFF_PKG_ERRORS on error
AC_DEFUN(PKG_CHECK_MODULES, [
AC_DEFUN([PKG_CHECK_MODULES], [
succeeded=no
if test -z "$PKG_CONFIG"; then
......@@ -6199,7 +6199,7 @@ AC_DEFUN(PKG_CHECK_MODULES, [
dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
AC_DEFUN([AM_PATH_SDL],
[dnl
dnl Get the cflags and libraries from the sdl-config script
dnl
......@@ -6392,14 +6392,14 @@ int main(int argc, char *argv[])
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.8.5])])
[AM_AUTOMAKE_VERSION([1.9.2])])
# Figure out how to run the assembler. -*- Autoconf -*-
......@@ -6499,7 +6499,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd`
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -6536,8 +6536,8 @@ else
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.])
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# serial 7 -*- Autoconf -*-
......@@ -6710,7 +6710,8 @@ AC_SUBST([AMDEPBACKSLASH])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
......@@ -6746,27 +6747,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
else
continue
fi
grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
# Extract the definition of DEP_FILES from the Makefile without
# running `make'.
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
# We invoke sed twice because it is the simplest approach to
# changing $(DEPDIR) to its actual value in the expansion.
for file in `sed -n '
/^DEP_FILES = .*\\\\$/ {
s/^DEP_FILES = //
:loop
s/\\\\$//
p
n
/\\\\$/ b loop
p
}
/^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
......@@ -6821,7 +6816,7 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
# This macro actually does too much some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
......@@ -6897,7 +6892,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
......@@ -6906,7 +6900,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
......@@ -6999,6 +6995,46 @@ fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 3
AC_DEFUN([AM_MAINTAINER_MODE],
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode is disabled by default
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
......@@ -7149,13 +7185,21 @@ fi
# this.)
AC_DEFUN([AM_PROG_MKDIR_P],
[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# Keeping the `.' argument allows $(mkdir_p) to be used without
# argument. Indeed, we sometimes output rules like
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined.
# (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
# expensive solution, as it forces Make to start a sub-shell.)
mkdir_p='mkdir -p -- .'
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
......@@ -7321,3 +7365,111 @@ fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 1
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility.
AM_MISSING_PROG([AMTAR], [tar])
m4_if([$1], [v7],
[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'