Commit 8c539242 authored by Per Olofsson's avatar Per Olofsson

Install a special config.opts on some archs.

parent ff08412e
......@@ -287,6 +287,9 @@ uninstall-tools:
install-config:
$(INSTALL) -d $(DESTDIR)$(pcmciaconfdir)
$(INSTALL_DATA) -D config/config.opts $(DESTDIR)$(pcmciaconfdir)/config.opts
if [ -f config/config.opts.$(ARCH) ]; then \
$(INSTALL_DATA) -D config/config.opts.$(ARCH) $(DESTDIR)$(pcmciaconfdir)/config.opts; \
fi
uninstall-config:
# - rm -f $(DESTDIR)$(pcmciaconfdir)/config.opts
......
#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards. Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards. PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards. Those are set by
# the PCI hotplug subsystem.
#
# Allow all the dino/cujo port ranges (usually we get the first one)
# NOTE: the address range for this is a signed short (hence the upper
# limit is 0x7fff). If the PCMCIA card isn't on the dino/cujo bus
# which has been assigned this range, you're out of luck. In
# particular, PCMCIA won't work in a box with an EISA subsystem
# because that claims 0-0xffff.
include port 0x0-0x7fff
# Allow all parisc I/O space
include memory 0xf0000000-0xffffffff
#
# Local PCMCIA Configuration File
#
#----------------------------------------------------------------------
#
# System resources available for PCMCIA cards
#
# NOTE: these settings have no effect on resources assigned to a
# CardBus bridge device itself; this file only affects resources
# assigned to cards. Also, interrupt settings here will only affect
# ISA bus interrupts assigned to 16-bit cards. PCI interrupts
# generally can't be reconfigured.
#
# With the kernel PCMCIA subsystem, these settings also have no effect
# at all on resources used for 32-bit CardBus cards. Those are set by
# the PCI hotplug subsystem.
#
include port 0x100-0x4ff
include port 0x1000-0x17ff
include memory 0x80000000-0x80ffffff
......@@ -2,6 +2,9 @@ pcmciautils (012-4) UNRELEASED; urgency=low
[ Colin Watson ]
* Remove unnecessary ancient-shell paranoia from init script (#350381).
[ Per Olofsson ]
* Install a special config.opts on some archs.
-- Colin Watson <cjwatson@debian.org> Sun, 29 Jan 2006 11:40:58 +0000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment