Commit 2ffd3535 authored by Beatrice Torracca's avatar Beatrice Torracca Committed by David Kalnischkies

fix 3 typos/omissions in apt.conf(5)

Closes: 809160
parent c72f5c4f
......@@ -656,11 +656,11 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";};
with <literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</replaceable></literal>
or <literal>Acquire::Changelogs::URI::Override::Origin::<replaceable>ORIGIN</replaceable></literal>.
The value should be a normal URI to a text file, expect that package specific data is
The value should be a normal URI to a text file, except that package specific data is
replaced with the placeholder <literal>@CHANGEPATH@</literal>. The
value for it is: 1. if the package is from a component (e.g. <literal>main</literal>)
this is the first part otherwise it is omitted, 2. the first letter of source package name,
expect if the source package name starts with '<literal>lib</literal>' in which case it will
except if the source package name starts with '<literal>lib</literal>' in which case it will
be the first four letters. 3. The complete source package name. 4. the complete name again and
5. the source version.
The first (if present), second, third and fourth part are separated by a slash ('<literal>/</literal>')
......@@ -829,9 +829,10 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";};
by multiple <literal>key::=value</literal> lines with the same key. The
configuration section ends with a blank line.</para>
<para>Package action lines consist of five fields in Version 2: old version, direction
of version change (&lt; for upgrades, &gt; for downgrades, = for no
change), new version, action. The version fields are "-" for no version
<para>Package action lines consist of five fields in Version 2: package
name (without architecture qualification even if foreign), old version,
direction of version change (&lt; for upgrades, &gt; for downgrades, = for
no change), new version, action. The version fields are "-" for no version
at all (for example when installing a package for the first time; no
version is treated as earlier than any real version, so that is an
upgrade, indicated as <literal>- &lt; 1.23.4</literal>). The action field
......@@ -841,7 +842,7 @@ DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt";};
<para>In Version 3 after each version field follows the architecture
of this version, which is "-" if there is no version, and a field showing
the MultiArch type "same", foreign", "allowed" or "none". Note that "none"
the MultiArch type "same", "foreign", "allowed" or "none". Note that "none"
is an incorrect typename which is just kept to remain compatible, it
should be read as "no" and users are encouraged to support both.</para>
......
......@@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.1.9\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
......@@ -3496,11 +3496,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</replaceable></literal> "
"or "
"<literal>Acquire::Changelogs::URI::Override::Origin::<replaceable>ORIGIN</replaceable></literal>. "
"The value should be a normal URI to a text file, expect that package "
"The value should be a normal URI to a text file, except that package "
"specific data is replaced with the placeholder "
"<literal>@CHANGEPATH@</literal>. The value for it is: 1. if the package is "
"from a component (e.g. <literal>main</literal>) this is the first part "
"otherwise it is omitted, 2. the first letter of source package name, expect "
"otherwise it is omitted, 2. the first letter of source package name, except "
"if the source package name starts with '<literal>lib</literal>' in which "
"case it will be the first four letters. 3. The complete source package "
"name. 4. the complete name again and 5. the source version. The first (if "
......@@ -3744,14 +3744,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml:1
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -3759,7 +3760,7 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that "
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
......
......@@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.8\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-09-14 14:46+0200\n"
"Last-Translator: Chris Leick <c.leick@vollbio.de>\n"
"Language-Team: German <debian-l10n-german@lists.debian.org>\n"
......@@ -5056,11 +5056,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5397,14 +5397,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5412,9 +5413,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -38,7 +38,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-07-04 01:31+0200\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
......@@ -5098,11 +5098,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5453,14 +5453,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5468,9 +5469,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -11,7 +11,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-11-15 17:26+0100\n"
"Last-Translator: Jean-Pierre Giraud <jean-pierregiraud@neuf.fr>\n"
"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
......@@ -5046,11 +5046,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5387,14 +5387,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5402,9 +5403,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -10,7 +10,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2015-01-27 14:11+0200\n"
"Last-Translator: Beatrice Torracca <beatricet@libero.it>\n"
"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
......@@ -5073,11 +5073,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5412,14 +5412,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5427,9 +5428,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.6\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-07-10 19:52+0900\n"
"Last-Translator: KURASAWA Nozomu <nabetaro@debian.or.jp>\n"
"Language-Team: Debian Japanese List <debian-japanese@lists.debian.org>\n"
......@@ -4882,11 +4882,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5209,14 +5209,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5224,9 +5225,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.10.1-nl\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2015-10-17 13:21+0200\n"
"Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>\n"
"Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>\n"
......@@ -5137,11 +5137,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5482,14 +5482,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5497,9 +5498,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -11,7 +11,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-07-04 02:13+0200\n"
"Last-Translator: Robert Luberda <robert@debian.org>\n"
"Language-Team: Polish <manpages-pl-list@lists.sourceforge.net>\n"
......@@ -4719,11 +4719,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -4964,14 +4964,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -4979,9 +4980,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.7\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2014-08-29 00:34+0100\n"
"Last-Translator: Américo Monteiro <a_monteiro@gmx.com>\n"
"Language-Team: Portuguese <traduz@debianpt.org>\n"
......@@ -5027,11 +5027,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -5362,14 +5362,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -5377,9 +5378,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
......@@ -9,7 +9,7 @@ msgid ""
msgstr ""
"Project-Id-Version: apt-doc 1.0.5\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
"POT-Creation-Date: 2015-12-27 19:16+0100\n"
"POT-Creation-Date: 2015-12-27 22:52+0100\n"
"PO-Revision-Date: 2004-09-20 17:02+0000\n"
"Last-Translator: André Luís Lopes <andrelop@debian.org>\n"
"Language-Team: <debian-l10n-portuguese@lists.debian.org>\n"
......@@ -3466,11 +3466,11 @@ msgid ""
"<literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</"
"replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
"Origin::<replaceable>ORIGIN</replaceable></literal>. The value should be a "
"normal URI to a text file, expect that package specific data is replaced "
"normal URI to a text file, except that package specific data is replaced "
"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
"1. if the package is from a component (e.g. <literal>main</literal>) this "
"is the first part otherwise it is omitted, 2. the first letter of source "
"package name, expect if the source package name starts with '<literal>lib</"
"package name, except if the source package name starts with '<literal>lib</"
"literal>' in which case it will be the first four letters. 3. The complete "
"source package name. 4. the complete name again and 5. the source version. "
"The first (if present), second, third and fourth part are separated by a "
......@@ -3709,14 +3709,15 @@ msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt.conf.5.xml
msgid ""
"Package action lines consist of five fields in Version 2: old version, "
"direction of version change (&lt; for upgrades, &gt; for downgrades, = for "
"no change), new version, action. The version fields are \"-\" for no version "
"at all (for example when installing a package for the first time; no version "
"is treated as earlier than any real version, so that is an upgrade, "
"indicated as <literal>- &lt; 1.23.4</literal>). The action field is "
"\"**CONFIGURE**\" if the package is being configured, \"**REMOVE**\" if it "
"is being removed, or the filename of a .deb file if it is being unpacked."
"Package action lines consist of five fields in Version 2: package name "
"(without architecture qualification even if foreign), old version, direction "
"of version change (&lt; for upgrades, &gt; for downgrades, = for no change), "
"new version, action. The version fields are \"-\" for no version at all (for "
"example when installing a package for the first time; no version is treated "
"as earlier than any real version, so that is an upgrade, indicated as "
"<literal>- &lt; 1.23.4</literal>). The action field is \"**CONFIGURE**\" if "
"the package is being configured, \"**REMOVE**\" if it is being removed, or "
"the filename of a .deb file if it is being unpacked."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......@@ -3724,9 +3725,9 @@ msgstr ""
msgid ""
"In Version 3 after each version field follows the architecture of this "
"version, which is \"-\" if there is no version, and a field showing the "
"MultiArch type \"same\", foreign\", \"allowed\" or \"none\". Note that \"none"
"\" is an incorrect typename which is just kept to remain compatible, it "
"should be read as \"no\" and users are encouraged to support both."
"MultiArch type \"same\", \"foreign\", \"allowed\" or \"none\". Note that "
"\"none\" is an incorrect typename which is just kept to remain compatible, "
"it should be read as \"no\" and users are encouraged to support both."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment