Commit d3bf4bb0 authored by Dominique Dumont's avatar Dominique Dumont

Import Upstream version 0.6.2.1

parents
Vreixo Formoso
Mario Danic
Thomas Schmitt
This diff is collapsed.
Vreixo Formoso <metalpain2002@yahoo.es>,
Mario Danic <mario.danic@gmail.com>,
Thomas Schmitt <scdbackup@gmx.net>
Copyright (C) 2007-2008 Vreixo Formoso, Mario Danic, Thomas Schmitt
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that the
`configure' script does not know about. Run `./configure --help' for
details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, `configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
pkgconfigdir=$(libdir)/pkgconfig
libincludedir=$(includedir)/libisofs
lib_LTLIBRARIES = libisofs/libisofs.la
## ========================================================================= ##
# Build libraries
libisofs_libisofs_la_LDFLAGS = \
-version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
libisofs_libisofs_la_SOURCES = \
libisofs/builder.h \
libisofs/builder.c \
libisofs/node.h \
libisofs/node.c \
libisofs/tree.h \
libisofs/tree.c \
libisofs/image.h \
libisofs/image.c \
libisofs/fsource.h \
libisofs/fsource.c \
libisofs/fs_local.c \
libisofs/fs_image.c \
libisofs/messages.h \
libisofs/messages.c \
libisofs/libiso_msgs.h \
libisofs/libiso_msgs.c \
libisofs/stream.h \
libisofs/stream.c \
libisofs/util.h \
libisofs/util.c \
libisofs/util_rbtree.c \
libisofs/util_htable.c \
libisofs/filesrc.h \
libisofs/filesrc.c \
libisofs/ecma119.h \
libisofs/ecma119.c \
libisofs/ecma119_tree.h \
libisofs/ecma119_tree.c \
libisofs/writer.h \
libisofs/buffer.h \
libisofs/buffer.c \
libisofs/rockridge.h \
libisofs/rockridge.c \
libisofs/rockridge_read.c \
libisofs/joliet.h \
libisofs/joliet.c \
libisofs/eltorito.h \
libisofs/eltorito.c \
libisofs/iso1999.h \
libisofs/iso1999.c \
libisofs/data_source.c
libinclude_HEADERS = \
libisofs/libisofs.h
## ========================================================================= ##
## Build demo applications
noinst_PROGRAMS = \
demo/lsl \
demo/cat \
demo/catbuffer \
demo/tree \
demo/ecma119tree \
demo/iso \
demo/isoread \
demo/isocat \
demo/isomodify \
demo/isoms \
demo/isogrow
demo_lsl_CPPFLAGS = -Ilibisofs
demo_lsl_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_lsl_SOURCES = demo/lsl.c
demo_cat_CPPFLAGS = -Ilibisofs
demo_cat_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_cat_SOURCES = demo/cat.c
demo_catbuffer_CPPFLAGS = -Ilibisofs
demo_catbuffer_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_catbuffer_SOURCES = demo/cat_buffer.c
demo_tree_CPPFLAGS = -Ilibisofs
demo_tree_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_tree_SOURCES = demo/tree.c
demo_ecma119tree_CPPFLAGS = -Ilibisofs
demo_ecma119tree_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_ecma119tree_SOURCES = demo/ecma119_tree.c
demo_iso_CPPFLAGS = -Ilibisofs
demo_iso_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_iso_SOURCES = demo/iso.c
demo_isoread_CPPFLAGS = -Ilibisofs
demo_isoread_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_isoread_SOURCES = demo/iso_read.c
demo_isocat_CPPFLAGS = -Ilibisofs
demo_isocat_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_isocat_SOURCES = demo/iso_cat.c
demo_isomodify_CPPFLAGS = -Ilibisofs
demo_isomodify_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_isomodify_SOURCES = demo/iso_modify.c
demo_isoms_CPPFLAGS = -Ilibisofs
demo_isoms_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS)
demo_isoms_SOURCES = demo/iso_ms.c
demo_isogrow_CPPFLAGS = -Ilibisofs -Ilibburn
demo_isogrow_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS) -lburn
demo_isogrow_SOURCES = demo/iso_grow.c
## Build unit test
check_PROGRAMS = \
test/test
test_test_CPPFLAGS = -Ilibisofs
test_test_LDADD = $(libisofs_libisofs_la_OBJECTS) $(THREAD_LIBS) -lcunit
test_test_LDFLAGS = -L.. -lm
test_test_SOURCES = \
test/test.h \
test/test.c \
test/test_node.c \
test/test_image.c \
test/test_tree.c \
test/test_util.c \
test/test_rockridge.c \
test/test_stream.c \
test/mocked_fsrc.h \
test/mocked_fsrc.c
## ========================================================================= ##
## Build documentation (You need Doxygen for this to work)
docdir = $(DESTDIR)$(prefix)/share/doc/$(PACKAGE)-$(VERSION)
doc: doc/html
doc/html: doc/doxygen.conf
$(RM) -r doc/html; \
doxygen doc/doxygen.conf;
install-data-local:
if [ -d doc/html ]; then \
$(mkinstalldirs) $(docdir)/html; \
$(INSTALL_DATA) doc/html/* $(docdir)/html; \
fi
uninstall-local:
rm -rf $(docdir)
## ========================================================================= ##
# Extra things
nodist_pkgconfig_DATA = \
libisofs-1.pc
EXTRA_DIST = \
libisofs-1.pc.in \
version.h.in \
doc/doxygen.conf.in \
doc/Tutorial \
README \
AUTHORS \
COPYRIGHT \
COPYING \
NEWS \
INSTALL \
TODO \
ChangeLog \
Roadmap
This diff is collapsed.
== Fri Feb 22 2008 ==
Libisofs v0.6.2.1
=================
- FIX: missing buffer.h in tarball
== Thu Feb 14 2008 ==
Libisofs v0.6.2
================
- Initial release
This diff is collapsed.
>>>>>>>>>> RELEASE 0.6.1 (development) >>>>>>>>>>>>>>>>>>>>>
- Review error severities
OK - Prepare API for stability and compatibility check
- Documentation
>>>>>>>>>> RELEASE 0.6.2 (stable) >>>>>>>>>>>>>>>>>>>>>>>>>>
- Intensive testing and bug fixing
>>>>>>>>>> RELEASE 0.6.3 (development) >>>>>>>>>>>>>>>>>>>>>
- Improves to public tree
-> Expose node extended info. Always compile it.
(little memory cost)
-> Review builder / tree / node relation
-> Optimize storage of children in node?
-> Inode object?
- Expose Builder and Streams
- Implement filters: compression, encryption...
- Consider some kind of plugin system for Builders, Filesystems and Filters.
- ECMA-119, Joliet, and ISO-9660:1999 writers can share most of the code.
Create a new writer as a generalization of these.
- Update Java bindings
>>>>>>>>>>> ......
>>>>>>>>>>> RELEASE 1.0.0 (stable) >>>>>>>>>>>>>>>>>>>>>>>>>>
- UDF
- HFS
FEATURES
========
TODO
====
#00001 (node.h) -> consider adding new timestamps to IsoTreeNode
#00004 (libisofs.h) -> Add a get_mime_type() function.
#00005 (node.c) -> optimize iso_dir_iter_take.
#00006 (libisofs.h) -> define more replace values when adding a node to a dir
#00007 (libisofs.h) -> expose iso_tree_add_new_file
#00008 (data_dource.c) -> guard against partial reads
#00009 (ecma119_tree.c/h) -> add true support for harlinks and inode numbers
#00010 (buffer.c) -> optimize ring buffer
#00011 (ecma119.c) -> guard against bad path table usage with more than 65535 dirs
#00012 (fs_image.c) -> support follow symlinks on imafe filesystem
#00013 (fs_image.c) -> check for unsupported flags when reading a dir record
#00014 (fs_image.c) -> more sanity checks to ensure dir record info is valid
#00015 (fs_image.c) -> take care of CD-ROM XA discs when reading SP entry
#00016 (fs_image.c) -> handle non RR ER entries
#00017 (fs_image.c) -> take advantage of other atts of PVD
#00018 (fs_image.c) -> check if there are more entries in the boot catalog
#00019 (fs_image.c) -> set IsoImage attribs from Joliet SVD?
#00020 (fs_image.c) -> handle RR info in Joliet tree
#00021 (fs_image.c) -> handle RR info in ISO 9660:1999 tree
#00022 (joliet.c) -> support relaxed constraints in joliet filenames
#00024 (libisofs.h) -> option to convert names to lower case for iso reading
#00025 (libisofs.h) -> support for merging old image files
#00026 (libisofs.h) -> add support for "hidden" bootable images.
#00027 (iso1999.h) -> Follow ISO 9660:1999 specs when sorting files
FIXME
=====
AC_DEFUN([TARGET_SHIZZLE],
[
ARCH=""
AC_MSG_CHECKING([target operating system])
case $target in
*-*-linux*)
ARCH=linux
LIBBURN_ARCH_LIBS=
;;
*-*-freebsd*)
ARCH=freebsd
LIBBURN_ARCH_LIBS=-lcam
;;
*)
AC_ERROR([You are attempting to compile for an unsupported platform])
;;
esac
AC_MSG_RESULT([$ARCH])
])
This diff is collapsed.
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
scriptversion=2005-05-14.22
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand `-c -o'.
Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
esac
ofile=
cfile=
eat=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as `compile cc -o foo foo.c'.
# So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
# Create the lock directory.
# Note: use `[/.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
AC_INIT([libisofs], [0.6.2.1], [http://libburnia-project.org])
AC_PREREQ([2.50])
dnl AC_CONFIG_HEADER([config.h])
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE([subdir-objects])
dnl A61101 This breaks Linux build (makes 32 bit off_t)
dnl http://sourceware.org/autobook/autobook/autobook_96.html says
dnl one must include some config.h and this was a pitfall.
dnl So why dig the pit at all ?
dnl AM_CONFIG_HEADER(config.h)
dnl
dnl if MAJOR or MINOR version changes, be sure to change AC_INIT above to match
dnl
dnl CURRENT and AGE describe the binary compatibility interval of a
dnl dynamic library.
dnl See also http://www.gnu.org/software/libtool/manual.html#Interfaces
dnl
dnl The name of the library will be libisofs.so.$CURRENT-$AGE.$AGE.$REV
dnl In the terminology of this file:
dnl CURRENT = LT_CURRENT
dnl REV = LT_REVISION
dnl AGE = LT_AGE
dnl
dnl LT_CURRENT, LT_REVISION and LT_AGE get set directly now.
dnl
dnl SONAME of the emerging library is LT_CURRENT - LT_AGE.
dnl The linker will do no finer checks. Especially no age range check for
dnl the cdrskin binary. If SONAME matches, then the couple starts.
dnl