Commit 0d98000b authored by Ludovic Rousseau's avatar Ludovic Rousseau

Add Avtor SecureToken (idProduct: 0x0020)

parent 2a6c7245
idVendor: 0x15CF
iManufacturer: Avtor
idProduct: 0x0020
iProduct: SecureToken
bcdDevice: 3.11 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bulk-IN, bulk-OUT and Interrupt-IN
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
bulk transfer, optional interrupt-IN (CCID)
Can't get iInterface string
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.10
bMaxSlotIndex: 0x00
bVoltageSupport: 0x02
3.0V
dwProtocols: 0x0000 0x0002
T=1
dwDefaultClock: 3.571 MHz
dwMaximumClock: 3.571 MHz
bNumClockSupported: 0 (will use whatever is returned)
Support -217251840 kHz
dwDataRate: 9600 bps
dwMaxDataRate: 115200 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
Support 115200 bps
dwMaxIFSD: 254
dwSynchProtocols: 0x00000007
2-wire protocol
3-wire protocol
I2C protocol
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000207B2
....02 Automatic parameter configuration based on ATR data
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
..01.. CCID can set ICC in clock stop mode
..02.. NAD value other than 00 accepted (T=1)
..04.. Automatic IFSD exchange as first exchange (T=1)
02.... Short APDU level exchange
dwMaxCCIDMessageLength: 271 bytes
bClassGetResponse: 0xFF
echoes the APDU class
bClassEnvelope: 0xFF
echoes the APDU class
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1
#
# List of readers supported by the CCID driver
# Generated: 2019-03-13
# Generated: 2019-04-02
#
# DO NOT EDIT BY HAND
......@@ -201,6 +201,7 @@
# Avtor
0x15CF:0x0019:Avtor SecureToken
0x15CF:0x001D:Avtor SC Reader 371
0x15CF:0x0020:Avtor SecureToken
# Axalto
0x04E6:0x511C:Axalto Reflex USB v3
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment