Commit 54831a76 authored by Ludovic Rousseau's avatar Ludovic Rousseau

Add Identiv SCR3500 C Contact Reader

parent a691e5cb
idVendor: 0x04E6
iManufacturer: Identiv
idProduct: 0x581D
iProduct: SCR3500 C Contact Reader
bcdDevice: 2.02 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bulk-IN, bulk-OUT and Interrupt-IN
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
bulk transfer, optional interrupt-IN (CCID)
iInterface: CCID Interface
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.10
bMaxSlotIndex: 0x00
bVoltageSupport: 0x07
dwProtocols: 0x0000 0x0003
dwDefaultClock: 4.800 MHz
dwMaximumClock: 16.000 MHz
bNumClockSupported: 0 (will use whatever is returned)
IFD does not support GET CLOCK FREQUENCIES request: No such file or directory
dwDataRate: 12903 bps
dwMaxDataRate: 600000 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
IFD does not support GET_DATA_RATES request: No such file or directory
dwMaxIFSD: 252
dwSynchProtocols: 0x00000000
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000100BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
01.... TPDU level exchange
dwMaxCCIDMessageLength: 271 bytes
bClassGetResponse: 0xFF
echoes the APDU class
bClassEnvelope: 0xFF
echoes the APDU class
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1
# List of readers supported by the CCID driver
# Generated: 2018-11-30
# Generated: 2018-12-19
......@@ -426,6 +426,7 @@
0x04E6:0x581A:Identiv uTrust 3522 embd SE RFID Token
0x04E6:0x581B:Identiv uTrust 2910 R Taglio SC Reader
0x04E6:0x581C:Identiv SCR35xx USB Smart Card Reader
0x04E6:0x581D:Identiv SCR3500 C Contact Reader
# Identive
0x04E6:0x5710:Identive CLOUD 2700 F Smart Card Reader
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment