Commit 86954433 authored by Ludovic Rousseau's avatar Ludovic Rousseau

Add Broadcom Corp 58200 (idProduct: 0x5843)

parent 25ab9d6e
idVendor: 0x0A5C
iManufacturer: Broadcom Corp
idProduct: 0x5843
iProduct: 58200
bcdDevice: 1.01 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 1
bAlternateSetting: 0
bNumEndpoints: 3
bulk-IN, bulk-OUT and Interrupt-IN
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
bulk transfer, optional interrupt-IN (CCID)
iInterface: Contacted SmartCard
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.00
bMaxSlotIndex: 0x00
bVoltageSupport: 0x07
5.0V
3.0V
1.8V
dwProtocols: 0x0000 0x0003
T=0
T=1
dwDefaultClock: 4.000 MHz
dwMaximumClock: 4.000 MHz
bNumClockSupported: 0 (will use whatever is returned)
IFD does not support GET CLOCK FREQUENCIES request: Resource temporarily unavailable
dwDataRate: 9600 bps
dwMaxDataRate: 250000 bps
bNumDataRatesSupported: 0 (will use whatever is returned)
IFD does not support GET_DATA_RATES request: Resource temporarily unavailable
dwMaxIFSD: 247
dwSynchProtocols: 0x00000000
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000102BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
..02.. NAD value other than 00 accepted (T=1)
01.... TPDU level exchange
dwMaxCCIDMessageLength: 271 bytes
bClassGetResponse: 0x00
bClassEnvelope: 0x00
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1
idVendor: 0x0A5C
iManufacturer: Broadcom Corp
idProduct: 0x5843
iProduct: 58200
bcdDevice: 1.01 (firmware release?)
bLength: 9
bDescriptorType: 4
bInterfaceNumber: 2
bAlternateSetting: 0
bNumEndpoints: 3
bulk-IN, bulk-OUT and Interrupt-IN
bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
bInterfaceSubClass: 0
bInterfaceProtocol: 0
bulk transfer, optional interrupt-IN (CCID)
iInterface: Contactless SmartCard
CCID Class Descriptor
bLength: 0x36
bDescriptorType: 0x21
bcdCCID: 1.01
bMaxSlotIndex: 0x00
bVoltageSupport: 0x01
5.0V
dwProtocols: 0x0000 0x0003
T=0
T=1
dwDefaultClock: 3.580 MHz
dwMaximumClock: 3.580 MHz
bNumClockSupported: 1
Support 3580 kHz
dwDataRate: 9600 bps
dwMaxDataRate: 9600 bps
bNumDataRatesSupported: 1
Support 9600 bps
dwMaxIFSD: 254
dwSynchProtocols: 0x00000000
dwMechanical: 0x00000000
No special characteristics
dwFeatures: 0x000204BA
....02 Automatic parameter configuration based on ATR data
....08 Automatic ICC voltage selection
....10 Automatic ICC clock frequency change according to parameters
....20 Automatic baud rate change according to frequency and Fi, Di params
....80 Automatic PPS made by the CCID
..04.. Automatic IFSD exchange as first exchange (T=1)
02.... Short APDU level exchange
dwMaxCCIDMessageLength: 512 bytes
bClassGetResponse: 0x00
bClassEnvelope: 0x00
wLcdLayout: 0x0000
bPINSupport: 0x00
bMaxCCIDBusySlots: 1
#
# List of readers supported by the CCID driver
# Generated: 2018-10-24
# Generated: 2018-11-30
#
# DO NOT EDIT BY HAND
......@@ -231,6 +231,7 @@
0x0A5C:0x5833:Broadcom Corp 5880
0x0A5C:0x5834:Broadcom Corp 5880
0x0A5C:0x5842:Broadcom Corp 58200
0x0A5C:0x5843:Broadcom Corp 58200
# C3PO
0x0783:0x0007:C3PO TLTC2USB
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment