Commits on Source (35)
-
Lionel Landwerlin authored
Accumulation happens between 2 reports, it can be between a start/end report from another context. So only consider updating the hw_id of the results when it's not already valid and that we have a valid value to put in there. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 41b54b5f ("i965: move OA accumulation code to intel/perf") Reviewed-by:
Mark Janes <mark.a.janes@intel.com> Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> (cherry picked from commit acea59db)
-
Lionel Landwerlin authored
We always add an empty buffer in the list when creating the query. Let's set the len appropriately so that we can recognize it when we read OA reports up to the end of a query. We were using an 0 timestamp value associated with the empty buffer and incorrectly assuming this was a valid value. In turn that led to not reading enough reports and resulted in deltas added to our counter values which should have been discarded because those would be flagged for a different context. Signed-off-by:
-
Lionel Landwerlin authored
If we read the OA reports late enough after the query happens, we can get a timestamp in the report that is significantly in the past compared to the start timestamp of the query. The current code must deal with the wraparound of the timestamp value (every ~6 minute). So consider that if the difference is greater than half that wraparound period, we're probably dealing with an old report and make the caller aware it should read more reports when they're available. Signed-off-by:
-
Lionel Landwerlin authored
This is a more accurate description of what happens in processing the OA reports. Previously we only had a somewhat difficult to parse state machine tracking the context ID. What we really only need to do to decide if the delta between 2 reports (r0 & r1) should be accumulated in the query result is : * whether the r0 is tagged with the context ID relevant to us * if r0 is not tagged with our context ID and r1 is: does r0 have a invalid context id? If not then we're in a case where i915 has resubmitted the same context for execution through the execlist submission port v2: Update comment (Ken) Signed-off-by: -
Lionel Landwerlin authored
This expression was unused by the macro, probably why it didn't register in the compilation. Signed-off-by:
-
Dylan Baker authored
-
Rob Clark authored
Somehow adjusting maxloc based on existing outputs got lost, resulting in the clipdist varying clobbering the position varying. Causing a shader that had no position output in freedreno/ir3, which triggers GPU hangs in neverball. Fixes: d0f746b6 ("nir: Save nir_variable pointers in nir_lower_clip_vs rather than locs.") Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Kristian H. Kristensen <hoegsberg@google.com> (cherry picked from commit 372ed42d)
-
Ian Romanick authored
Without looking at the assembly or something, I'm not sure what the compiler does here. The brw_reg_type enum is marked packed, so I'm guess that it gets represented as a uint8_t. That's the only reason I could think that comparing with -1 would be always true. This patch adds the same cast that exists in brw_hw_type_to_reg_type. It might be better to add a #define outside the enum for BRW_REGISTER_TYPE_INVALID as (enum brw_reg_type)-1. src/intel/compiler/brw_eu_compact.c: In function ‘has_immediate’: src/intel/compiler/brw_eu_compact.c:1515:20: warning: comparison is always true due to limited range of data type [-Wtype-limits] 1515 | return *type != -1; | ^~ src/intel/compiler/brw_eu_compact.c:1518:20: warning: comparison is always true due to limited range of data type [-Wtype-limits] 1518 | return *type != -1; | ^~ Reviewed-by:Eric Engestrom <eric.engestrom@intel.com> CID: 1455194 Fixes: 12d3b119 ("intel/compiler: Add instruction compaction support on Gen12") Cc: @mattst88 (cherry picked from commit 668635ab)
-
Timothy Arceri authored
Iterate the system values list when adding varyings to the program resource list in the NIR linker. This is needed to avoid CTS regressions when using the NIR to build the GLSL resource list in an upcoming series. Presumably it also fixes a bug with the current ARB_gl_spirv support. Fixes: ffdb44d3 ("nir/linker: Add inputs/outputs to the program resource list") Reviewed-by:
Alejandro Piñeiro <apinheiro@igalia.com> (cherry picked from commit 1abca2b3)
-
Nanley Chery authored
The commit noted below assumed and enforced that DRM_MOD_INVALID was the only valid modifier for multi-planar imported images. Due to that, it required that modifier on multi-planar images to: 1. Allow multiple planes. 2. Perform YUV format lowering and extent adjustments. 3. Use buffer_index to correctly map the given planes. Fix these issues by removing or updating the code built on that assumption. Fixes: 2066966c ("gallium/dri2: Support creating multi-planar modifier images") Reviewed-by:
-
Fritz Koenig authored
With the addition of the planar formats helper, the planar formats no longer have a valid block.bits field. Calling util_format_get_blocksize therefore asserts. Reorder the check to see if the format is supported before doing the query to get the blocksize. Fixes: 20f132e5 ("gallium/util: add planar format layouts and helpers") Signed-off-by:
Fritz Koenig <frkoenig@google.com> Reviewed-by:
-
Faith Ekstrand authored
It's a very odd case to hit in the real world. However, there are some CTS tests which switch back and forth between dispatch and clear without changing the pipeline. Fixes: bc612536 "anv: Emit a dummy MEDIA_VFE_STATE before switching..." Reviewed-by:
Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com> (cherry picked from commit 0f60aa40)
-
Alyssa Rosenzweig authoredu_decomposed_prims_for_vertices cannot support POLYGON, but POLYGON is trivial to support as a special case directly (since we have the number of vertices directly). Fixes aborts in Panfrost in apps using GL_POLYGON. Fixes: e881aa8c ("gallium/util: Add u_stream_outputs_for_vertices helper") Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Revewied-by:
Eric Anholt <eric@anholt.net> (cherry picked from commit a37822f5)
-
Pierre-Eric Pelloux-Prayer authored
When using 3 planes, the sequence produces this chain: plane0 -> plane2 This commit fixes this to produce: plane0 -> plane1 -> plane2 Fixes: 86e60bc2 ("radeonsi: remove si_vid_join_surfaces and use combined planar allocations") Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2193 Reviewed-by:
Marek Olšák <marek.olsak@amd.com> (cherry picked from commit e3e91ceb)
-
Lionel Landwerlin authored
Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> (cherry picked from commit dcfe1903)
-
Dylan Baker authored
Fixes: 1ae8018a ("meson: Add support for the vc4 driver.") Reviewed-by:
-
Dylan Baker authored
Fixes: 1ae8018a ("meson: Add support for the vc4 driver.") Reviewed-by:
-
Bas Nieuwenhuizen authored
This is correct per the Vulkan spec format equivalence table. Fixes: f36b5274 "radv/android: Add android hardware buffer queries." Reviewed-by:
-
Nanley Chery authored
This format will be used to properly handle planar images with modifiers in iris. Fixes: 246eebba ("iris: Export and import surfaces with modifiers that have aux data") Reviewed-by:
-
James Xiong authored
When importing a dmabuf with a specified tiling, the dmabuf user should always try to set the tiling mode because: 1) the exporter can set tiling AFTER exporting/importing. 2) a dmabuf could be exported from a kernel driver other than i915, in this case the dmabuf user and exporter need to set tiling separately. This patch fixes a problem when running vkmark under weston with iris on ICL, it crashed to console with the following assert. i965 doesn't have this problem as it always tries to set the specified tiling mode. weston: ../src/gallium/drivers/iris/iris_resource.c:990: iris_resource_from_handle: Assertion `res->bo->tiling_mode == isl_tiling_to_i915_tiling(res->surf.tiling)' failed. Signed-off-by:
James Xiong <james.xiong@intel.com> Reviewed-by:
Rafael Antognolli <rafael.antognolli@intel.com> (cherry picked from commit b6d45e7f)
-
Nanley Chery authored
Multi-planar surfaces are allowed to have modifiers. Don't require DRM_FORMAT_MOD_INVALID in order to create a surface for each plane defined by the format. Fixes: 246eebba ("iris: Export and import surfaces with modifiers that have aux data") Reviewed-by:
-
Faith Ekstrand authored
Fixes: a44744e0 "anv: Require a dedicated allocation for..." Reviewed-by:
Ivan Briano <ivan.briano@intel.com> Reviewed-by:
-
Mauro Rossi authored
vl functions moved from radeonsi to gallium/auxiliary/vl have left android build of radeonsi in broken state. libmesa_galliumvl static is need to build readeonsi, gallium_dri building rules are reworked to avoid multiple symbols and libmesa_galliumvl static dependency is needed in radeonsi. Here is the changelog: - android: gallium/auxiliary: add libmesa_galliumvl static - android: gallium_dri: move libmesa_gallium to static to prevent multiple symbols - android: radeonsi: fix build after vl refactoring Fixes the following building error: external/mesa/src/gallium/drivers/radeonsi/si_uvd.c:47: error: undefined reference to 'vl_video_buffer_create_as_resource' clang.real: error: linker command failed with exit code 1 (use -v to see invocation) Fixes: 86e60bc2 ("radeonsi: remove si_vid_join_surfaces and use combined planar allocations") Signed-off-by:
Mauro Rossi <issor.oruam@gmail.com> Reviewed-by:
-
Pierre-Eric Pelloux-Prayer authored
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2177 Reviewed-by:
-
Samuel Pitoiset authored
Global load/store instructions can't know if the offset is out-of-bound because they don't use descriptors (no range). Fix this by clamping the offset for arrays that are indexed with a non-constant offset that's greater or equal to the array size. This fixes VM faults and GPU hangs with Dead Rising 4. Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2148 Fixes: 71a67942 ("ac/nir: Enable nir_opt_large_constants") Signed-off-by:
Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (cherry picked from commit a0f1a5fa)
-
Lionel Landwerlin authored
Maybe finer way of dealing with this requirement would be to increase the number of pdevice->memory.types[] to add a category for special alignment cases. Meanwhile this fixes the problem of CCS surface alignment and it's probably not going to cause issues given the size of our address space. Signed-off-by:
-
Dylan Baker authored
This reverts commit 2a497735. This patch is built on the previous patch, which needs to be reverted.
-
Dylan Baker authored
This reverts commit 87efb9f3. This is breaking the QT build, so it needs to go until these symbols can make their way to upstream khronos
-
Dylan Baker authored
-
Dylan Baker authored
-
Timo Aaltonen authored
-
Timo Aaltonen authored
-
Timo Aaltonen authored
-
Timo Aaltonen authored
-
Timo Aaltonen authored
debian/patches/fix-radv-secure-compile.diff
0 → 100644
docs/relnotes/19.3.0.html
0 → 100644
Source diff could not be displayed: it is too large. Options to address this: view the blob.